journal article·2017-12

Multilayer “Steel/Vanadium Alloy/Steel” Hybrid Material Obtained by High-Pressure Torsion at Different Temperatures

S. O. Rogachev, S. A. Nikulin, A. B. Rozhnov, V. M. Khatkevich, T. A. Nechaykina, M. V. Gorshenkov, R. V. Sundeev

Publisher page

Abstract

The severe plastic deformation (SPD) method for joining dissimilar metal materials to obtain a multilayer hybrid material having an ultrafine or nanoscale structure was proposed. A nanostructured multilayer “0.08C-18Cr-0.5Ti steel/V-10Ti-5Cr alloy/0.08C-18Cr-0.5Ti steel” hybrid material was obtained by high-pressure torsion (HPT) at different temperatures. The analysis of the structure of the hybrid material and its components was carried out by the methods of transmission and scanning electron microscopies. The distribution of chemical elements in the cross section of the hybrid material was studied by X-ray microanalysis. The microhardness was measured to estimate the hybrid material hardening after HPT. Tight joint zones between the layers of the hybrid material were formed during HPT. The fragmentation of the steel and vanadium alloy layers was observed, and the “mixing” of the layers occurred after HPT at 293 K and 473 K (20 °C and 200 °C). A smoother interface between the layers was observed after HPT at 673 K (400 °C). The significant hardening (2.0 to 3.5×) of each layer of the hybrid material was observed as a result of HPT.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. R.Z. Valiev, A.P. Zhilyaev, T.G. Langdon: Bulk Nanostructured Materials: Fundamentals and Applications, Wiley, Hoboken 2014
2. R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. Zehetbauer, Y.T. Zhu: Mater. Res. Lett., 2016, vol. 4, pp. 1-21. doi:10.1080/21663831.2015.106054310.1080/21663831.2015.1060543 ↗
3. J. Estrin, M. Murashkin, and R. Valiev: in Fundamentals of Aluminium Metallurgy, R.N. Lumley, Woodhead Publishing, Cambridge, 2011, pp. 468–97.10.1533/9780857090256.2.468 ↗
4. S.V. Divinski, G. Reglitz, I.S. Golovin, M. Peterlechner, R. Lapovok, Y. Estrin, G. Wilde: Acta Mater., 2015, vol. 82, pp. 11-21. doi:10.1016/j.actamat.2014.08.06410.1016/j.actamat.2014.08.064 ↗
5. S.A. Nikulin, S.O. Rogachev, A.B. Rozhnov, M.V. Gorshenkov, V.I. Kopylov, S.V. Dobatkin: Met. Sci. Heat Treat. 2012, vol. 54, pp. 407-13. doi:10.1007/s11041-012-9522-310.1007/s11041-012-9522-3 ↗
6. S.A. Nikulin, A.B. Rozhnov, S.O. Rogachev, V.M. Khatkevich, V.A. Turchenko, E.S. Khotulev: Mater. Lett., 2016, vol. 169, pp. 223-26. doi:10.1016/j.matlet.2016.01.14810.1016/j.matlet.2016.01.148 ↗
7. F.Y. Dong, P. Zhang, J.C. Pang, Y.B. Ren, K. Yang, Z.F. Zhang: Scr. Mater., 2015, vol. 96, pp. 5-8. doi:10.1016/j.scriptamat.2014.09.01610.1016/j.scriptamat.2014.09.016 ↗
8. V.F. Terentev, S.V. Dobatkin, S.A. Nikulin, V.I. Kopylov, D.V. Prosvirnin, S.O. Rogachev, I. Bannykh: Kovove Mater., 2011, vol. 49, pp. 65-7310.4149/km_2011_1_65 ↗
9. A.P. Zhilyaev, T.G. Langdon: Prog. Mater. Sci., 2008, vol. 53, pp. 893-979. doi:10.1016/j.pmatsci.2008.03.00210.1016/j.pmatsci.2008.03.002 ↗
10. Y. Estrin, M.J. Zehetbauer: in Bulk Nanostructured Materials. M.J. Zehetbauer and Y.T. Zhu, Wiley, Weinheim, 2009, pp. 635–48.10.1002/9783527626892 ↗
11. M.T. Pérez-Prado, A.A. Gimazov, O.A. Ruano, M.E. Kassner, A.P. Zhilyaev: Scr. Mater., 2008, vol. 58, pp. 219-22. doi:10.1016/j.scriptamat.2007.09.04310.1016/j.scriptamat.2007.09.043 ↗
12. B.B. Straumal, A.A. Mazilkin, S.G. Protasova, S.V. Dobatkin, A.O. Rodin, B. Baretzky, D. Goll, G. Schutz: Mater. Sci. Eng., A, 2009, vol. 503, pp. 185-89.10.1016/j.msea.2008.03.052 ↗
13. Y. Estrin Y., A. Vinogradov: Acta Mater., 2013, vol. 61, pp. 782-817. doi:10.1016/j.actamat.2012.10.03810.1016/j.actamat.2012.10.038 ↗
14. K. Edalati, T. Fujioka, Z. Horita: Mater. Trans., 2009, vol. 50, pp. 44-50. doi:10.2320/matertrans.MD20081210.2320/matertrans.MD200812 ↗
15. J. Estrin: in Integral Materials Modelling. Towards Physics-Based Through-Process Models, G. Gottstein, Wiley, Weinheim, 2007, pp. 275–84.10.1002/9783527610983.ch23 ↗
16. M.J. Zehetbauer, Y. Estrin: in Bulk Nanostructured Materials, M.J. Zehetbauer and Y.T. Zhu, Wiley, Weinheim, 2009, pp. 109–36.10.1002/9783527626892 ↗
17. I. Sabirov, M.Yu. Murashkin, R.Z. Valiev: Mater. Sci. Eng., A, 2013, vol. 560, pp. 1-24. doi:10.1016/j.msea.2012.09.02010.1016/j.msea.2012.09.020 ↗
18. G.J. Raab, R.Z. Valiev, T.C. Lowe, Y.T. Zhu: Mater. Sci. Eng., A, 2004, vol. 382, pp. 30-34. doi:10.1016/j.msea.2004.04.02110.1016/j.msea.2004.04.021 ↗
19. A.V. Polyakov, D.V. Gunderov, G.I. Raab: Mater. Sci. Forum, 2011, vol. 667-69, pp. 1165-1170. doi:10.4028/www.scientific.net/MSF.667-669.116510.4028/www.scientific.net/MSF.667-669.1165 ↗
20. T. Leitner, A. Hohenwarter, R. Pippan: Procedia Mater. Sci., 2014, vol. 3, pp. 1044-49. doi: doi.org/10.1016/j.mspro.2014.06.17010.1016/j.mspro.2014.06.170 ↗
21. M.F. Ashby, Y.J.M. Brechet: Acta Mater., 2003, vol. 51, pp. 5801-21. doi:10.1016/S1359-6454(03)00441-510.1016/S1359-6454(03)00441-5 ↗
22. O.Bouaziz, H.S. Kim, Y. Estrin: Adv. Eng. Mater., 2013, vol. 15, pp. 336-40. doi:10.1002/adem.20120026110.1002/adem.201200261 ↗
23. H. Tsai, L.J. Nowicki, M.C. Billone, H.M. Chung, D.L. Smith: Fusion Materials Semiannual Progress Report, 1997, vol. 23, pp. 70-76.
24. S.N. Votinov, V.P. Kolotushkin, S.A. Nikulin, V.Y. Turilina: Met. Sci. Heat Treat., 2009, vol. 51, pp. 238-44. doi:10.1007/s11041-009-9149-110.1007/s11041-009-9149-1 ↗
25. J. Chen, S. Qiu, L. Yang, Z. Xu, Y. Deng, Y. Xu: J. Nucl. Mat., 2002, vol. 302, pp. 135-42. doi:10.1016/S0022-3115(02)00775-410.1016/S0022-3115(02)00775-4 ↗
26. K. Aoyagi, E.P. Torres, T. Suda, S. Ohnuki: J. Nucl. Mat., 2000, vol. 283-287, pp. 876-79. doi:10.1016/S0022-3115(00)00140-910.1016/S0022-3115(00)00140-9 ↗
27. B.A. Loomis, B.J. Kestel, D.L. Smith: J. Nucl. Mat., 1988, vol. 155-157, pp. 1305-09. doi:10.1016/0022-3115(88)90516-810.1016/0022-3115(88)90516-8 ↗
28. S.A. Nikulin, A.B. Rozhnov, T.A. Nechaikina, S.O. Rogachev, S.Yu. Zavodchikov, V.M. Khatkevich: Russ. Metall, 2014, vol. 2014, pp. 793-99. doi:10.1134/S003602951410009710.1134/S0036029514100097 ↗
29. T.A. Nechaikina, S.A. Nikulin, A.B. Rozhnov, S.O. Rogachev, S.N. Votinov, G. Gerstein: Met. Sci. Heat Treat., 2015, vol. 57, pp. 210-14. doi:10.1007/s11041-015-9863-910.1007/s11041-015-9863-9 ↗
30. T.A. Nechaykina, S.A. Nikulin, A.B. Rozhnov, V.M. Khatkevich, S.O. Rogachev: Metall. Mater. Trans. A, 2017, vol. 48, pp. 1330-42. doi:10.1007/s11661-016-3915-710.1007/s11661-016-3915-7 ↗
31. R. Kulagin, Y. Beygelzimer, Y. Ivanisenko, A. Mazilkin, H. Hahn: IOP Conf. Series: Mater. Sci. Eng. 2017, vol. 194. doi:10.1088/1757-899X/194/1/012045.10.1088/1757-899X/194/1/012045 ↗
32. T.E. Konstantinova: Physics and High Pressure Technology, 2009, vol. 19, pp. 7-29 [in russian]