journal article·2017-07

Role of Different Kinds of Boundaries Against Cleavage Crack Propagation in Low-Temperature Embrittlement of Low-Carbon Martensitic Steel

Mizuki Tsuboi, Akinobu Shibata, Daisuke Terada, Nobuhiro Tsuji

Publisher page

Abstract

The present paper investigated the relationship between low-temperature embrittlement and microstructure of lath martensite in a low-carbon steel from both microstructural and crystallographic points of view. The fracture surface of the specimen after the miniaturized Charpy impact test at 98 K (−175 °C) mainly consisted of cleavage fracture facets parallel to crystallographic {001} planes of martensite. Through the crystallographic orientation analysis of micro-crack propagation, we found that the boundaries which separated different martensite variants having large misorientation angles of {001} cleavage planes could inhibit crack propagation. It was then concluded that the size of the aggregations of martensite variants belonging to the same Bain deformation group could control the low-temperature embrittlement of martensitic steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. S. Jin, J. W. Morris and V. F. Zackay: Metall. Trans. A, 1975, vol. 6A, pp. 141-9.10.1007/BF02673682 ↗
2. S. Takaki, K. Kawasaki and Y. Kimura: J. Mater. Process. Technol., 2001, vol. 117, pp. 359-63.10.1016/S0924-0136(01)00797-X ↗
3. N. Tsuji, S. Okuno, Y. Koizumi and Y. Minamino: Mater. Trans., 2004, vol. 45, pp. 2272-81.10.2320/matertrans.45.2272 ↗
4. R. Song, D. Ponge and D. Raabe: Acta Mater., 2005, vol. 53, pp. 4881-92.10.1016/j.actamat.2005.07.009 ↗
5. A.-F. Gourgues, H. M. Flower and T. C. Lindley: Mater. Sci. Technol., 2000, vol. 16, pp, 26-4010.1179/026708300773002636 ↗
6. A. R. Marder and G. Krauss: Trans. ASM, 1967, vol. 60, pp. 651-60.
7. J. M. Marder and A. R. Marder: Trans. ASM, 1969, vol. 62, pp. 1-10.
8. S. Matsuda, T. Inoue, H. Mimura and Y. Okamura: Proc. of Int. Sympo. on Toward improved Ductility and Toughness, 1971, pp. 47–66.
9. L. Zhijun, S. Junchang, S. Hang, D. Yuehua, Y. Caifu and Z. Xing: J. Iron Steel Res. Int., 2010, vol. 17, pp. 40-8.
10. C. Wang, M. Wang, J. Shi, W. Hui and H. Dong: Scripta Mater., 2008, vol. 58, pp. 492-5.10.1016/j.scriptamat.2007.10.053 ↗
11. T. Hanamura, F. Yin and K. Nagai: ISIJ Int., 2004, vol. 44, pp. 610-7.10.2355/isijinternational.44.610 ↗
12. J. W. Morris, C. S. Lee and Z. Guo: ISIJ Int., 2003, vol. 43, pp. 410-9.10.2355/isijinternational.43.410 ↗
13. J. W. Morris: ISIJ Int., 2011, vol. 51, pp. 1569-75.10.2355/isijinternational.51.1569 ↗
14. J. W. Morris, C. Kinney, K. Pytlewski and Y. Adachi: Sci. technol. Adv. Mater., 2013, vol. 14, pp. 1-9.10.1088/1468-6996/14/1/014208 ↗
15. A. Kimura, A. Koya, T. Morimura and T. Misawa: Mater. Sci. Eng. A, 1994, vol. 176A, pp. 425-30.10.1016/0921-5093(94)91010-3 ↗
16. A. R. Marder and G. Krauss: Trans. ASM, 1969, vol. 62, pp. 957-64.
17. P. M. Kelly, A. Jostsons and R. G. Blake: Acta Metall. Mater., 1990, vol. 38, pp. 1075-81.10.1016/0956-7151(90)90180-O ↗
18. M. X. Zhang and P. M. Kelly: Scr. Mater., 2002, vol. 47, pp. 749-55.10.1016/S1359-6462(02)00196-3 ↗
19. T. Maki: Proc. of the Int. Sympo. on Steel Science, 1971, pp. 1–10.
20. S. Morito, H. Tanaka, R. Konishi, T. Furuhara and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789-99.10.1016/S1359-6454(02)00577-3 ↗
21. [21] S. Morito, X. Huang, T. Furuhara, T. Maki and N. Hansen: Acta Mater., 2006, vol. 54, pp. 5323-31.10.1016/j.actamat.2006.07.009 ↗
22. S. Morito, Y. Adachi and T. Ohba: Mater. Trans., 2009, vol. 50, pp. 1919-23.10.2320/matertrans.MRA2008409 ↗
23. C.C. Kinney, K.R. Pytlewski, A.G. Khachaturyan and J.W. Morris: Acta Mater., 2014, vol. 69, pp. 372-85.10.1016/j.actamat.2014.01.058 ↗
24. S. Zhang, S. Morito and Y. Komizo: ISIJ Int., 2012, vol. 52, pp. 510-15.10.2355/isijinternational.52.510 ↗
25. T. Furuhara, H. Kawata, S. Morito and T. Maki: Mat. Sci. Eng. A, 2006, vol. 431A, pp. 228-36.10.1016/j.msea.2006.06.032 ↗
26. H. Kitahara, R. Ueji, N. Tsuji and Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279-88.10.1016/j.actamat.2005.11.001 ↗
27. M. Tsuboi, A. Shibata, D. Terada and N. Tsuji: Mater. Today: Proc., 2015, vol. 2, pp. S655-8.10.1016/j.matpr.2015.07.369 ↗