journal article·2017-04

Effect of Cooling Rate and Chemical Composition on Microstructure and Properties of Naturally Cooled Vanadium-Microalloyed Steels

Anish Karmakar, Pooja Sahu, Suman Neogy, Debalay Chakrabarti, Rahul Mitra, Subrata Mukherjee, Saurabh Kundu

Publisher page

Abstract

Samples from two V-microalloyed steels (0.05 wt pct V) having different C and N levels, namely high-C low-N steel, HCLN (0.22 wt pct C, 0.007 wt pct N) and low-C high-N steel, LCHN (0.06 wt pct C, 0.013 wt pct N) were naturally cooled from 1373 K (1100 °C) to room temperature over a range of cooling rates (0.07 to 3.33 K/s). Samples from a plain C-Mn steel (0.06 wt pct C, 0.007 wt pct N) were also subjected to the same heat treatment for comparison. The effect of cooling rate and steel composition on microstructures, precipitates, and tensile properties has been investigated. Due to the presence of large fraction of harder constituents, like pearlite and bainite, HCLN steel showed higher strength and lower ductility than LCHN steel. LCHN steel, on the other hand, showed good combination of strength and ductility due to its predominantly ferrite matrix with precipitation strengthening. The V-precipitate size was more refined and the precipitate density was higher in HCLN steel than that in LCHN steel. This observation confirms the importance of C content in V-microalloyed steel in terms of precipitation strengthening. An intermediate cooling rate (~1.4 K/s) has been found to be the optimum choice in order to maximize the precipitation strengthening in V-containing steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. 1. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, 1997, Book 615, pp. 80–115.
2. 2. J. Speer: in Int. Semin. 2005 Appl. Technol. Vanadium Flat – Roll. Steels, 2005, pp. 35–39.
3. 3. F. Peñalba, C. G. De Andres, M. Carsi, and F. Zapirain: J. Mater. Sci., 1996, vol. 31, pp. 3847-52.10.1007/BF00352801 ↗
4. 4. R. Staśko, H. Adrian, and A. Adrian: Mater. Charact., 2006, vol. 56, pp. 340-47.10.1016/j.matchar.2005.09.012 ↗
5. 5. S. C. Wang: J. Mater. Sci., 1990, vol. 25, pp. 187-93.10.1007/BF00544206 ↗
6. 6. F. Ishikawa, T. Takahashi, and T. Ochi: Metall. Mater. Trans. A, 1994, vol. 25, pp. 929-36.10.1007/BF02652268 ↗
7. 7. C. Capdevila, F. G. Caballero, and C. G. De Andres: Metall. Mater. Trans. A, 2001, vol. 32, pp. 1591-97.10.1007/s11661-001-0137-3 ↗
8. 8. C. Capdevila, C. García-Mateo, J. Chao, and F. G. Caballero: Metall. Mater. Trans. A, 2009, vol. 40, pp. 522-38.10.1007/s11661-008-9730-z ↗
9. 9. C. Yang and Q. Wang: J. Iron Steel Res. Int., 2008, vol. 15, pp. 81-86.10.1016/S1006-706X(08)60037-0 ↗
10. 10. J. Nikolaou and G. D. Papadimitriou: Constr. Build. Mater., 2004, vol. 18, pp. 243-54.10.1016/j.conbuildmat.2004.01.001 ↗
11. 11. J. Nikolaou and G. D. Papadimitriou: Int. J. Impact Eng., 2005, vol. 31, pp. 1065-80.10.1016/j.ijimpeng.2004.05.005 ↗
12. 12. S. Shanmugam, M. Tanniru, R. D. K. Misra, D. Panda, and S. Jansto: Mater. Sci. Technol., 2005, vol. 21, pp. 165-77.10.1179/174328405X18656 ↗
13. 13. S. Zajac, T. Siwecki, W. B. Hutchinson, and R. Lagneborg: ISIJ Int., 1998, vol. 38, pp. 1130-39.10.2355/isijinternational.38.1130 ↗
14. 14. J. J. Kramer, G. M. Pound, and R. F. Mehl: Acta Metall., 1958, vol. 6, pp. 763-71.10.1016/0001-6160(58)90051-8 ↗
15. 15. P. C. Campbell, E. B. Hawbolt, and J. K. Brimacombe: Metall. Trans. A, 1991, vol. 22, pp. 2791-2805.10.1007/BF02851373 ↗
16. 16. S. Lenka, S. Kundu, S. Chandra, and S. B. Singh: Mater. Sci. Technol., 2013, vol. 29, pp. 715-25.10.1179/1743284713Y.0000000205 ↗
17. 17. S. Kundu, A. Mukhopadhyay, S. Chatterjee, and S. Chandra: ISIJ Int., 2004, vol. 44, pp. 1217-23.10.2355/isijinternational.44.1217 ↗
18. 18. S. Zajac, T. Siwecki, W. B. Hutchinson, and R. Lagneborg: Mater. Sci. Forum, 1998, vol. 284, pp. 295–302.10.4028/www.scientific.net/MSF.284-286.295 ↗
19. 19. F. A. Khalid: Mater. Sci. Eng. A, 2002, vol. 325, pp. 281-85.10.1016/S0921-5093(01)01471-X ↗
20. 20. M. D. M. A. Bepari: Metall. Trans. A, 1990, vol. 21, pp. 2839-55.10.1007/BF02647205 ↗
21. 21. S. W. Thompson and G. Krauss: Metall. Trans. A, 1989, vol. 20, pp. 2279-88.10.1007/BF02666663 ↗
22. 22. S. Gündüz and R. C. Cochrane: Mater. Des., 2005, vol. 26, 486-92.10.1016/j.matdes.2004.07.022 ↗
23. 23. P. Maugis and M. Gouné: Acta Mater., 2005, vol. 53, pp. 3359-67.10.1016/j.actamat.2005.03.036 ↗
24. 24. I. H. M. Ali, I. M. Moustafa, A. M. Farid, and R. J. Glodowski: Mater. Sci. Forum, 2005, vol. 500–501, pp. 503-10.10.4028/www.scientific.net/MSF.500-501.503 ↗
25. 25. X. Chun, Q. Sun, and X. Chen: Mater. Des., 2007, vol. 28, pp. 2523-27.10.1016/j.matdes.2006.09.005 ↗
26. 26. M. J. White and W. S. Owen: Metall. Trans. A, 1980, vol. 11, pp. 597-604.10.1007/BF02670696 ↗
27. 27. N. K. Balliger and R. W. K. Honeycombe: Metall. Trans. A, 1980, vol. 11, pp. 421-29.10.1007/BF02654566 ↗
28. 28. S. F. Medina, A. Quispe and M. Gomez: Metall. Mater. Trans. A, 2014, vol. 45(3), pp 1524-39.10.1007/s11661-013-2068-1 ↗
29. 29. H. Najafi, J. Rassizadehghani, and S. Asgari: Mater. Sci. Eng. A, 2008, vol. 486, pp. 1-7.10.1016/j.msea.2007.08.057 ↗
30. 30. J. Rassizadehghani, H. Najafi, M. Emamy, and G. Eslami-Saeen: J. Mater. Sci. Technol., 2007, vol. 23, pp. 779-84.
31. 31. B. D. Jana, A. K. Chakrabarti, and K. K. Ray: Mater. Sci. Technol., 2013, vol. 19, pp. 80-86.10.1179/026708303225008644 ↗
32. 32. F. Ma, G. Wen, and W. Wang: Steel Res. Int., 2013, vol. 84, pp. 370-75.10.1002/srin.201200161 ↗
33. 33. J. Zhao, J. H. Lee, Y. W. Kim, Z. Jiang, and C. S. Lee: Mater. Sci. Eng. A, 2013, vol. 559, pp. 427-35.10.1016/j.msea.2012.08.122 ↗
34. 34. S. Roy, S. Patra, S. Neogy, A. Laik, S. K. Choudhary and D. Chakrabarti: Metall. Mater. Trans. A, 2012, vol. 43A, pp 1845-60.10.1007/s11661-011-1045-9 ↗
35. P. Hásek and K. Macek: Metal, 2004, pp. 1-16.10.1016/S1350-4789(04)00317-4 ↗
36. 36. A. Karmakar, S. Kundu, S. Roy, S. Neogy, D. Srivastava, and D. Chakrabarti: Mater. Sci. Technol., 2014, vol. 30, pp. 653-64.10.1179/1743284713Y.0000000386 ↗
37. A. Standard: Stand. Test Methods Tens. Test. Met. Mater. ASTM Int., West Conshohocken, PA, 2001.
38. 38. J. Hu, L.-X. Du, J.-J. Wang, H. Xie, C.-R. Gao, and R. D. K. Misra: Mater. Sci. Eng. A, 2013, vol. 585, pp. 197-204.10.1016/j.msea.2013.07.071 ↗
39. 39. C. Capdevila, C. García-Mateo, J. Cornide, J. Chao, and F. G. Caballero: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3743-51.10.1007/s11661-011-0721-0 ↗
40. 40. J. Chen, M. Lv, S. Tang, Z. Liu, and G. Wang: Mater. Sci. Eng. A, 2014, vol. 594, pp. 389-93.10.1016/j.msea.2013.09.086 ↗
41. 41. R. Lagneborg and S. Zajac: Metall. Mater. Trans. A, 2001, vol. 32, pp. 39-50.10.1007/s11661-001-0249-9 ↗
42. 42. N. R. V Bangaru and A. K. Sachdev: Metall. Trans. A, 1982, vol. 13, pp. 1899-1906.10.1007/BF02645933 ↗
43. 43. L. Holappa, V. Ollilainen, and W. Kasprzak: J. Mater. Process. Technol., 2001, vol. 109, pp. 78-82.10.1016/S0924-0136(00)00778-0 ↗
44. 44. Y. Ohmori: Trans. Iron Steel Inst. Japan, 1971, vol. 11, pp. 339-48.10.2355/isijinternational1966.11.339 ↗
45. H. K. D. H. Bhadeshia: Bainite in Steels, 2001, 2nd ed., The Institute of Materials.
46. 46. S. Shanmugam, R. D. K. Misra, T. Mannering, D. Panda, and S. G. Jansto: Mater. Sci. Eng. A, 2006, vol. 437, pp. 436-45.10.1016/j.msea.2006.08.007 ↗
47. 47. C. Garcıia de Andrés, F. G. Caballero, C. Capdevila, and L. F. Álvarez: Mater. Charact. 2002, vol. 48, pp. 101-11.10.1016/S1044-5803(02)00259-0 ↗
48. 48. S. W. Thompson, D. J. V. Col, and G. Krauss: Metall. Trans. A, 1990, vol. 21, pp. 1493-1507.10.1007/BF02672564 ↗
49. 49. F. Xiao, B. Liao, D. Ren, Y. Shan, and K. Yang: Mater. Charact., 2005, vol. 54, pp. 305-14.10.1016/j.matchar.2004.12.011 ↗
50. 50. M. Zhang, L. Li, R. Y. Fu, D. Krizan, and B. C. De Cooman: Mater. Sci. Eng. A, 2006, vol. 438–440, pp. 296-99.10.1016/j.msea.2006.01.128 ↗
51. 51. S. Zheng, Q. Wu, Q. Huang, S. Liu, and Y. Han: Fusion Eng. Des., 2011, vol. 86, 2616-19.10.1016/j.fusengdes.2011.02.072 ↗
52. 52. A. Karmakar, R. D. K. Misra, S. Neogy, and D. Chakrabarti: Metall. Mater. Trans. A, 2013, vol. 44, pp. 4106-18.10.1007/s11661-013-1757-0 ↗
53. 53. E. V Morales, R. A. Silva, I. S. Bott, and S. Paciornik: Mater. Sci. Eng. A, 2013, vol. 585, pp. 253-60.10.1016/j.msea.2013.07.060 ↗
54. 54. Y. Li, J. A. Wilson, A. J. Craven, P. S. Mitchell, D. N. Crowther, and T. N. Baker: Mater. Sci. Technol., 2007, vol. 23, pp. 509-18.10.1179/174328407X166687 ↗
55. 55. E. V. Morales, J. Gallego, and H. J. Kestenbach: Philos. Mag. Lett., 2003, vol. 83, pp. 79-8710.1080/0950083021000056632 ↗
56. 56. M. Y. Chen, M. Gouné, M. Verdier, Y. Bréchet, and J. R. Yang: Acta Mater., 2014, vol. 64, pp. 78-92.10.1016/j.actamat.2013.11.025 ↗
57. 57. J. G. Speer, J. R. Michael, and S. S. Hansen: Metall. Trans. A, 1987, vol. 18, pp. 211-22.10.1007/BF02825702 ↗
58. 58. J. A. Todd and P. Li: Metall. Trans. A, 1986, vol. 17, pp. 1191-1202.10.1007/BF02665318 ↗
59. 59. S. Zajac: Mater. Sci. Forum, 2005, vol. 500-501, pp. 75-86.10.4028/www.scientific.net/MSF.500-501.75 ↗
60. Thermodynamic database for Fe-systems (mc_fe_v1.030.tdb), Mobility database for Fe-systems (mc_fe_v1.001.ddb), Institute of Materials Science and Technology, Vienna University of Technology, Austria.
61. 61. E. Kozeschnik, J. Svoboda, P. Fratzl, and F.D. Fischer: Mater. Sci. Eng. A, 2004, vol. 385, pp. 157-65.
62. 62. D. Ramakrishna and S. P. Gupta: Mater. Sci. Eng., 1987, vol. 92, pp. 179-91.10.1016/0025-5416(87)90168-6 ↗
63. 63. E. O. Hall: Proc. Phys. Soc. Sect. B, 1951, vol. 64, pp. 747.10.1088/0370-1301/64/9/303 ↗
64. 64. X. Mao, X. Huo, X. Sun, and Y. Chai: J. Mater. Process. Technol., 2010, vol. 210, pp. 1660-66.10.1016/j.jmatprotec.2010.05.018 ↗
65. 65. W. B. Morrison: ASM Trans. Quart., 1966, vol. 59, pp. 824-46.
66. 66. W. J. Poole, X. Wang, D. J. Lloyd, and J. D. Embury: Philos. Mag., 2005, vol. 85, pp. 3113-35.10.1080/14786430500154935 ↗
67. 67. M. A. Altuna, A. Iza-Mendia, and I. Gutiérrez: Metall. Mater. Trans. A, 2012, vol. 43, pp. 4571-86.10.1007/s11661-012-1270-x ↗
68. 68. A. Iza-Mendia, M. A. Altuna, B. Pereda, and I. Gutiérrez: Metall. Mater. Trans. A, 2012, vol. 43, pp. 4553-70.10.1007/s11661-012-1395-y ↗
69. 69. Y.J. Zhang, G. Miyamoto, K. Shinbo, and T. Furuhara: Scr. Mater., 2013, vol. 69, pp. 17-20.10.1016/j.scriptamat.2013.03.020 ↗