journal article·2016-11

Exploring the Phase Transformation in β-Quenched Ti-55531 Alloy During Continuous Heating via Dilatometric Measurement, Microstructure Characterization, and Diffusion Analysis

Fuwen Chen, Guanglong Xu, Xiaoyong Zhang, Kechao Zhou

Publisher page

Abstract

Phase transformations of the β-quenched Ti-55531 alloy during continuous heating were studied by combining dilatometric measurement with phase analysis, microstructure observation, and local composition mapping. The corresponding transformation sequence can be verified as β → ω, β + ω → β + α, β → α, and α → β. By revisiting the individual phase transformations in the aforementioned transformation sequence, the variations of macro volume discovered in dilatometer test were reinterpreted based on three mechanisms, i.e., modification of crystallographic symmetry, thermodynamically partitioning, and diffusion kinetics. The interplay of different mechanisms was discussed for individual transformations, especially for the combinative partitioning and diffusion kinetic mechanisms of governed α ↔ β transformation. The pileups of Al atoms behind the growing α/β interface during β → α and of Mo atoms in the β side of α/β interface during α → β were observed and explained by incorporating the diffusion kinetic mechanism. All of these discoveries and discussions provided a deeper understanding of the phase transformations in Ti-55531 alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. N. Duret, G. Lutjering, and J. Albrecht: Ti-2003. : Sci. Technol., 2003, pp. 2667–71.
2. X. Zhang, Y. Chen, F.S. Zhang, J.T. Yang, Y.J. Lai, H.C. Kou, J.S. Li, and L. Zhou: Mater. Sci. Forum., 2013, vol. 747, pp. 912–918.10.4028/www.scientific.net/MSF.747-748.912 ↗
3. M. Dikovits, C. Poletti, and F. Warchomicka: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 1586–1596.10.1007/s11661-013-2073-4 ↗
4. F. Warchomicka, M. Stockinger, and H.P. Degischer: Ti-2007. Sci. Technol., 2007, pp. 511–14.
5. C. Poletti, F. Warchomicka, M. Dikovits, and S. Großeiber: Mater. Sci. Forum, 2012, vol.710, pp. 93–100.10.4028/www.scientific.net/MSF.710.93 ↗
6. F. Warchomicka, C. Poletti, and M. Stockinger: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8277– 8285.10.1016/j.msea.2011.07.068 ↗
7. O.M. Ivasishin, P.E. Markovsky, Y.V. Matviychuk, and S.L. Semiatin: Metall. Mater. Trans. A, 2003, vol. 34, pp. 147–158.10.1007/s11661-003-0216-8 ↗
8. J.D.C. Teixeira, B. Appolaire, E. Aeby-Gautier, S. Denis, G. Cailletaud, and N. Späth: Mater. Sci. Eng. A, 2007, vol. 448, pp. 135–145.10.1016/j.msea.2006.10.024 ↗
9. P. Barriobero-Vila, G. Requena, F. Warchomicka, A. Stark, N. Schell, and T. Buslaps: J. Mater. Sci., 2015, vol. 50, pp. 1412–1426.10.1007/s10853-014-8701-6 ↗
10. Q. Contrepois, M. Carton, and J. Lecomte-Beckers: O. J. Metal, 2011, vol. 1, pp. 1–11.10.4236/ojmetal.2011.11001 ↗
11. A. Settefrati, E. Aeby-Gautier, M. Dehmas, G. Geandier, B. Appolaire, S. Audion, and J. Delfosse: Solid State Phenom, 2011, vol. 760, pp. 172–174.
12. T. Gloriant, G. Texier, F. Sun, I. Thibon, F. Prima, and J.L. Soubeyroux: Script. Mater., 2008, vol. 58, pp. 271–74.10.1016/j.scriptamat.2007.10.007 ↗
13. T. Gloriant, G. Texier, F. Prima, D. Laille´, D.M. Gordin, I. Thibon, and D. Ansel: Adv. Eng. Mater., 2006, vol. 8, pp. 961–965.10.1002/adem.200600106 ↗
14. F. Prima, P. Vermaut, D. Ansel, and J. Debuigne: Mater. Trans. JIM, 2000, vol. 41, pp. 1092–1097.10.2320/matertrans1989.41.1092 ↗
15. F. Sun, F. Prima, and T. Gloriant: Mter. Sci. Eng. A, 2010, vol. 527, pp. 4262–4269.10.1016/j.msea.2010.03.044 ↗
16. E.S.N. Lopes, A. Cremasco, C.R.M. Afonso, and R. Caram: Mater. Charact., 2011, vol. 62, pp. 673–680.10.1016/j.matchar.2011.04.015 ↗
17. T.W. Duerig, J. Albrecht, D. Richter, and P. Fischer: Acta Metall., 1982, vol. 30, pp. 2161–2172.10.1016/0001-6160(82)90137-7 ↗
18. M.H. Cai, C.Y. Lee, S. Kang, and Y.K. Lee: Script. Mater., 2011, vol. 64, pp. 1098–1101.10.1016/j.scriptamat.2011.02.030 ↗
19. B.A. Borok, E.K. Novikova, L.S. Golubeva, R.P. Shchegoleva, and N.A. Rueh’eva: Met. Sci. Heat Treat, 1963, vol. 5, pp. 94–98.10.1007/BF00650697 ↗
20. Q. Hui, X. Xue, H. Kou, M. Lai, B. Tang, and J. Li: J Mater Sci., 2013, vol. 48, pp. 1966–1972.10.1007/s10853-012-6962-5 ↗
21. M.P. Wan, Y.Q. Zhao, and W.D. Zeng: Rare Met., 2015, vol. 34, pp. 233–238.10.1007/s12598-015-0472-y ↗
22. N. Clément: PhD Dissertation, Catholic University of Louvain, 2013.
23. A.A. Il’in, M.Y. Kollerov, V.V. Zasypkin, and V.M. Maistrov: Met Sci Heat Treat, 1986, vol. 28, pp. 68–72.10.1007/BF00735553 ↗
24. Y.H. Wang, H.C. Kou, H. Chang, Z.S. Zhu, X.F. Su, J.S. Li, and L. Zhou: J. Alloy Compd., 2009, vol. 472, pp. 252–256.10.1016/j.jallcom.2008.04.035 ↗
25. J.J. English and G.W. Powell: Trans of the Metal Soc of AIME, 1966, vol. 236, pp. 1467–1473.
26. G. Neumann and C. Tuijn; Self-diffusion and impurity diffusion in pure metals: handbook of experimental data, p. 362, Elsevier, London, 2011.
27. G. Lutjering and J.C. Williams: Titanium, 2nd ed., p. 266, Springer-Verlag, Berlin Heidelberg, 2007.
28. N.G. Jones, R.J. Dashwood, M. Jackson, and D. Dye: Acta Mater. 2009, vol. 57, pp. 3830–3839.10.1016/j.actamat.2009.04.031 ↗
29. D. Qin, Y. Lu, K. Zhang, Q. Liu, and L. Zhou: Mater. Charact. 2012, vol. 73, pp. 77–80.10.1016/j.matchar.2012.07.019 ↗
30. W. Szkliniarz and G. Smotka: J Mater. Process. Tech., 1995, vol. 53, pp. 413–422.10.1016/0924-0136(95)01998-T ↗
31. S. Banerjee and P. Mukhopadhyay: Phase transformations: examples from titanium and zirconium alloys, p. 468, Elsevier, Oxford, 2007.
32. A. Devaraj, R.E.A. Williams, S. Nag, R. Srinivasan, H.L. Fraser, and R. Banerjee: Script. Mater., 2009, vol. 61, pp. 701–704.10.1016/j.scriptamat.2009.06.006 ↗
33. W.F. Gale and T.C. Totemeir: Smithell’s metals reference book, p. 294, Butterworth-Heinemann, London, 2004.
34. Y. Chen, B. Tang, G.L. Xu, C.Y. Wang, H.C. Kou, J.S. Li, and Y.W. Cui: Metall. Mater. Trans. A, 2014, vol. 45, pp. 1647–1652.10.1007/s11661-014-2245-x ↗
35. M. Ahmed, T. Li, G. Casillas, J.M. Cairney, D. Wexler, and E.V. Pereloma: J. Alloy Compd., 2015, vol. 629, pp. 260–273.10.1016/j.jallcom.2015.01.005 ↗