Effects of Thermal Aging on Material Properties, Stress Corrosion Cracking, and Fracture Toughness of AISI 316L Weld Metal
Source abstract
Abstract
Thermal aging and consequent embrittlement of materials are ongoing issues in cast stainless steels, as well as duplex, and high-Cr ferritic stainless steels. Spinodal decomposition is largely responsible for the well-known “748 K (475 °C) embrittlement” that results in drastic reductions in ductility and toughness in these materials. This process is also operative in welds of either cast or wrought stainless steels where δ-ferrite is present. While the embrittlement can occur after several hundred hours of aging at 748 K (475 °C), the process is also operative at lower temperatures, at the 561 K (288 °C) operating temperature of a boiling water reactor (BWR), for example, where ductility reductions have been observed after several tens of thousands of hours of exposure. An experimental program was carried out in order to understand how spinodal decomposition may affect changes in material properties in Type 316L BWR piping weld metals. The study included material characterization, nanoindentation hardness, double-loop electrochemical potentiokinetic reactivation (DL-EPR), Charpy-V, tensile, SCC crack growth, and in situ fracture toughness testing as a function of δ-ferrite content, aging time, and temperature. SCC crack growth rates of Type 316L stainless steel weld metal under simulated BWR conditions showed an approximate 2 times increase in crack growth rate over that of the unaged as-welded material. In situ fracture toughness measurements indicate that environmental exposure can result in a reduction of toughness by up to 40 pct over the corresponding at-temperature air-tested values. Material characterization results suggest that spinodal decomposition is responsible for the degradation of material properties measured in air, and that degradation of the in situ properties may be a result of hydrogen absorbed during exposure to the high-temperature water environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Nuclear Materials and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. G. Slama, P. Petrequin, and T. Mager: SMIRT Seminar #6, Assuring Structural Integrity of Steel Reactor Pressure Boundary Components, August 29-30, 1983, Monterey, CA.
2. D.J. Gavenda, W.F. Michaud, T.M. Galvin, W.F. Burke, and O.K. Chopra: NUREG/CR-6428, Argonne National Laboratory, 1996.
3. H.M. Chung, and T.R. Leax: Mater. Sci. Technol., 1990, Vol. 6, pp. 249-262.10.1179/mst.1990.6.3.249 ↗
4. T. Yamada, S. Okano, and H. Kuwano: J. Nucl. Mater., 2006, Vol. 350, pp. 47-55.10.1016/j.jnucmat.2005.11.008 ↗
5. J.K. Sahu, U. Krupp, R.N. Ghosh, and H.J. Christ: Mater. Sci. Eng., 2009, Vol. A508, pp. 1-14.10.1016/j.msea.2009.01.039 ↗
6. J.D. Mithieux, and R. Fourmentin: Duplex Stainless Steels, Ed. J. Charles, EDP Sciences, France, 2010, pp. 413–25.
7. N. Meyer, M. Mantel, A. Gauthier, and C. Bourgin: Rev. Metall., 2011, Vol. 108, pp. 213-223.10.1051/metal/2011060 ↗
8. G.A. Young, J.D. Tucker, N. Lewis, E. Plesko, and P. Sander: Proc. of the 15th Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, TMS, 7–11 August, 2011, Colorado Springs, CO.
9. T. Hamaoka, A. Nomoto, K. Nishida, K. Dohi, and N. Soneda: Phil. Mag., 2012, Vol. 34, pp. 4354-4375.10.1080/14786435.2012.707340 ↗
10. T.J. Nichol, A. Datta, and G. Aggen: Metall. Trans., 1980, Vol. 11A, pp. 573-585.10.1007/BF02670694 ↗
11. M.B. Cortie, and H. Pollak: Mater. Sci. Eng., 1995, Vol. A199, pp. 153-163.10.1016/0921-5093(94)09731-3 ↗
12. J.M. Vitek: Metall. Mater. Trans. A, 1987, Vol. 18A, pp. 154-156.10.1007/BF02646233 ↗
13. J.M. Vitek, S.A. David, D.J. Alexander, J.R. Keiser, and R.K. Nanstad: Acta Metall. Mater., Vol. 39, 1991, pp. 503-516.10.1016/0956-7151(91)90118-K ↗
14. K. Chandra, V. Kain, V. Bhutani, V.S. Raja, R. Tewari, G.K. Dey, and J.K. Chakravartty: Mater. Sci. Eng., 2012, Vol. 534, pp. 163-175.10.1016/j.msea.2011.11.055 ↗
15. K. Chandra, V. Kain, V.S. Raja, R. Tewari, and G.K. Dey: Corros. Sci., 2012, Vol. 54, pp. 278-290.10.1016/j.corsci.2011.09.031 ↗
16. H. Abe, and Y. Watanabe: Metall. Mater. Trans. A, 2008, Vol. 39A, pp. 1392-1398.10.1007/s11661-008-9511-8 ↗
17. J. Hillard: Phase Transformations, ASM International, Materials Park, OH, 1970, pp. 359–70.
18. J. Zhou, J. Odqvit, M. Thuvander, S. Hertzman, and P. Hedström: Acta Mater., 2012, Vol. 60, pp. 5818-5827.10.1016/j.actamat.2012.07.022 ↗
19. T. Lucas: Doctoral Thesis, MIT, Cambridge, MA, 2011.
20. D.J. Kotecki, and T.A. Siewart: Weld. J., 1992, Vol. 71, pp. 171-178.
21. W.C. Oliver, and G.M. Pharr: J. Mater. Res., 2004, Vol. 19, pp. 3-20.10.1557/jmr.2004.19.1.3 ↗
22. International Standard ISO 12732:2006(E): Corrosion of Metals and Alloys-Electrochemical Potentiokinetic Reactivation Measurement Using the Double Loop Method, First Edition, 2006.
23. ASTM: Standard Method for Measurement of Fracture Toughness, ASTM E 1820–01, ASTM International, New York, 2001.
24. J. C. Lippold, and D. J. Kotecki: Welding Metallurgy and Weldability of Stainless Steels, John Wiley and Sons, New Jersey, 2005.
25. M. Ivanchenko, U. Ehrnstén, A. Forsström, R. Ballinger, and H. Hänninen: The 14th International Conference on Material Issues in Design, Manufacture, and Operation of Nuclear Power Plants Equipment, June 6–10, 2016, St. Petersburg, Russia.
26. P.H. Pumphrey, and K.N. Akhurst: Mater. Sci. Technol., 1990, Vol. 6, pp.211-220.10.1179/mst.1990.6.3.211 ↗
27. J. Nayak, K.R. Udupa, K.R. Hebbar, and H.V.S. Nayak: Bulletin of Mater. Sci., 2004, Vol. 27, pp. 511-515.10.1007/BF02707278 ↗
28. W. J. Mills: Int. Mater. Rev., 1997, Vol. 42, pp. 45-82.10.1179/imr.1997.42.2.45 ↗
29. JSME S NA1-2002: “Code for Nuclear Power Generation Facilities”, Rules on Fitness-for-Service for Nuclear Power Plants, The Japan Society of Mechanical Engineers, October, 2002.
30. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 2nd edn, Wiley, New York, 1995.
31. J. Brooks, and A. West: Metall. Trans. A, 1981, Vol. 12A, pp. 213-223.10.1007/BF02655194 ↗
32. J. Brooks, A. West, and A. Thompson: Metall. Trans. A, 1983, Vol. 14A, pp. 75-84.10.1007/BF02643740 ↗
33. M. Luppo, A. Hazarabedian, and J. Ovejero-Garcia: Corr. Sci., 1999, Vol. 41, pp. 87-103.10.1016/S0010-938X(98)00083-3 ↗
34. B. Somerday, M. Dadfarnia, D. Balch, K. Nibur, C. Cadden, and P. Sofronis: Metall. Mater. Trans. A, 2009, Vol. 40A, pp. 2350-2362.10.1007/s11661-009-9922-1 ↗