Thermal Parameters and Microstructural Development in Directionally Solidified Zn-Rich Zn-Mg Alloys
Source abstract
Abstract
Transient directional solidification experiments have been carried out with Zn-Mg hypoeutectic alloys under an extensive range of cooling rates with a view to analyzing the evolution of microstructure. It is shown that the microstructure is formed by a Zn-rich matrix of different morphologies and competitive eutectic mixtures (Zn-ZnMg and Zn-ZnMg). For 0.3 wt-pct Mg and 0.5 wt-pct Mg alloys, the Zn-rich matrix is shown to be characterized by high-cooling rates plate-like cells (cooling rates >9.5 and 24 K/s, respectively), followed by a granular–dendritic morphological transition for lower cooling rates. In contrast, a directionally solidified Zn1.2 wt-pct Mg alloy casting is shown to have the Zn-rich matrix formed only by dendritic equiaxed grains. Experimental growth laws are proposed relating the plate-like cellular interphase, the secondary dendritic arm spacing, and the eutectic interphase spacings to solidification thermal parameters, i.e., cooling rate and growth rate. The experimental law for the growth of secondary dendritic spacings under unsteady-state solidifications is also shown to encompass results of hypoeutectic Zn-Mg alloys subjected to steady-state Bridgman growth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. M. Vlot, R. Bleeker, T. Maalman, and G. Van Peristein: Proceedings of Galvanized Sheet Forum, ILZRO and IZA, Dusseldorlf, 2006.
2. 2. S. Sugimaru, S. Tanaka, N. Hikita, H. Ohba, A. Yoshie, S. Nishida: Nippon Steel Tech. Rep., 2007, vol. 96, pp. 34-8.
3. 3. P. Volovitch, C. Allely, K. Ogle: Corr. Sci., 2009, vol. 51, pp. 1251-62.10.1016/j.corsci.2009.03.005 ↗
4. 4. M. Dutta, A. K. Halder, S. B. Singh: Surf. Coat. Technol., 2010, vol. 205, pp. 2578-84.10.1016/j.surfcoat.2010.10.006 ↗
5. 5. C. Yao, W. Chen, W. Gao: Surf. Coat. Technol., 2013, vol. 219, pp. 126-30.10.1016/j.surfcoat.2013.01.015 ↗
6. 6. J. H. La, S. Y. Lee, S. J. Hong: Surf. Coat. Technol., 2014, vol. 259, pp. 56-61.10.1016/j.surfcoat.2014.07.006 ↗
7. 7. C. Yao, Z. Wang, S. L. Tay, W. Gao: Surf. Coat. Technol., 2014, vol. 260, pp. 39-45.10.1016/j.surfcoat.2014.06.067 ↗
8. 8. J. Duchoslav, R. Steinberger, M. Arndt, T. Keppert, G. Luckeneder, K. H. Stellnberger, J. Hagler, G. Angeli, C. K. Riener, D. Stiftera: Corr. Sci., 2015, vol. 91, pp. 311-20.10.1016/j.corsci.2014.11.033 ↗
9. 9. K. Honda, W. Yamada, K. Ushioda: Mater. Trans., 2008, vol. 49, pp. 1395-400.10.2320/matertrans.MRA2008009 ↗
10. 10. T. Prosek, A. Nazarov, U. Bexell, D. Thierry, J. Serak: Corr. Sci., 2008, vol. 50, pp. 2216-31.10.1016/j.corsci.2008.06.008 ↗
11. 11. R. Krieg, A. Vimalanandan, M. Rohwerder: J. Electrochem. Soc., 2014, vol. 161, pp. C156-61.10.1149/2.103403jes ↗
12. 12. T. Prosek, D. Persson, J. Stoulil, D. Thierry: Corr. Sci., 2014, vol. 86, pp. 231–8.10.1016/j.corsci.2014.05.016 ↗
13. M. S. Azevedo, C. Allély, K. Ogle, P. Volovitch: Corr. Sci., 2015, vol. 90, pp. 472–81.10.1016/j.corsci.2014.05.014 ↗
14. 14. T. Prosek, A. Nazarov, A. L. Gac, D. Thierry: Prog. Org. Coat., 2015, vol. 83, pp. 26-35.10.1016/j.porgcoat.2015.01.023 ↗
15. 15. X. Wang, H. Lu, X. Li, L. Li, Y. Zheng: Trans. Nonferrous Met. Soc. China, 2007, vol. 17: pp. s122-5.10.1016/S1003-6326(07)60059-4 ↗
16. 16. J. Gao, S. Wu, L. Qiao, Y. Wang: Trans. Nonferrous Met. Soc. China, 2008, vol. 18, pp. 588-92.10.1016/S1003-6326(08)60102-8 ↗
17. 17. D. Chen, Y. He, H. Too, Y. Zhang, Y. Jiang, X. Zhang, S. Zhang: Int. J. Molecular Medicine, 2011, vol. 28, pp. 343-8.
18. 18. S. Cai, T. Lei, N. Li, F. Feng: Mat. Sci. Eng. C-Bio. S., 2012, vol. 32, pp. 2570-7.10.1016/j.msec.2012.07.042 ↗
19. 19. H. R. Bakhsheshi-Rad, M. H. Idris, M. R.A. Kadir, S. Farahany, A. F. Lotfabadi, A. A. Suhasril: Adv. Sci. Lett., 2013, vol. 19, pp. 2553-7.10.1166/asl.2013.4975 ↗
20. P.R. Cha, H. S. Han, G. F. Yang, Y. C. Kim, K. H. Hong, S. C. Lee, J. Y. Jung, J. P. Ahn, Y. Y.Kim, S. Y. Cho, J. Y. Byun, K. S. Lee, S. J. Yang, H. K. Seok: Sci. Rep., 2013, vol. 3, pp. 2367.10.1038/srep02367 ↗
21. 21. J. Kubásek, D. Vojtech: J. Mater. Sci. Mater. Med., 2013, vol. 24, pp. 1615-26.10.1007/s10856-013-4916-3 ↗
22. H. R. Bakhsheshi-Rad, E. Hamzah, A. Fereidouni-Lotfabadi, M. Daroonparvar, M. A. M. Yajid, M. Mezbahul-Islam, M. Kasiri-Asgarani, M. Medraj: Mater. Corros., 2014, vol. 65, pp. 1178–87.10.1002/maco.201307588 ↗
23. 23. D. Liu, Y. Liu, Y. Huang, R. Song, M. Chen: Prog. Nat. Sci., 2014, vol. 24, pp. 452–7.10.1016/j.pnsc.2014.08.002 ↗
24. C. Yao, Z. Wang, S. L. Tay, T. Zhu, W. Gao: J. Alloys Compd., 2014, vol. 602, pp. 101-7.10.1016/j.jallcom.2014.03.025 ↗
25. 25. M. S. Dargusch, K. Pettersen, K. Nogita, M. D. Nave, G. L. Dunlop: Mater. Trans., 2006, vol. 47, pp. 977-82.10.2320/matertrans.47.977 ↗
26. 26. E. Zhang, L. Yang, J. Xu, H. Chen: Acta Biomater., 2010, vol. 6, pp. 1756-62.10.1016/j.actbio.2009.11.024 ↗
27. L. Yang, Y. Huang, F. Feyerabend, R. Willumeit, C. Mendis, K. U. Kainer, N. Hort: Acta Biomater., 2013, vol. 9, pp. 8499-508.10.1016/j.actbio.2013.03.017 ↗
28. 28. G. Bi, Y. Li, S. Zang, J. Zhang, Y. Ma, Y. Hao: J. Magnesium Alloys, 2014, vol. 2, pp. 64–71.10.1016/j.jma.2014.03.002 ↗
29. 29. W. R. Osório, E. S. Freitas, A. Garcia: Corrosion, 2014, vol. 70, pp. 1031-42.10.5006/1293 ↗
30. 30. S. Zhao, Q. Peng, H. Li, B. Liu: J. Alloys Comp., 2014, vol. 584, pp. 56-62.10.1016/j.jallcom.2013.09.026 ↗
31. 31. F. Bertelli, C. Brito, I. L. Ferreira, G. Reinhart, H. Nguyen-Thi, N. Mangelinck-Noel, N. Cheung, A. Garcia: Mater. Des., 2015, vol. 72, pp. 31-42.10.1016/j.matdes.2015.02.006 ↗
32. 32. M. T. Mohammed, Z. A. Khan, M. Geetha, A. N. Siddiquee: J. Alloys Comp., 2015, vol. 634, pp. 272-80.10.1016/j.jallcom.2015.02.095 ↗
33. 33. Y. L. Zhou, Y. Li, D. M. Luo, Y. Ding, P. Hodgson: Mat. Sci. Eng. C-Bio. S., 2015, vol 49, pp. 93-100.10.1016/j.msec.2014.12.057 ↗
34. 34. P. R. Goulart, J. E. Spinelli, N. Cheung, A. Garcia: Mater. Chem Phys., 2010, vol. 119, pp. 272-278.10.1016/j.matchemphys.2009.08.063 ↗
35. 35. H. Y. Liu, H. Jones: Acta Metall. Mater., 1992, vol. 40, pp. 229-39.10.1016/0956-7151(92)90298-S ↗
36. 36. H. Y. Liu, H. Jones: J. Mater. Sci. Lett., 1992, vol. 11, pp. 769-70.10.1007/BF00729487 ↗
37. 37. P. K. Rohatgi, K. Pasciak, C. S. Narendranath, S. Ray, A. Sachdev: J. Mater Sci., 1994, vol. 29, pp. 5357–66.10.1007/BF01171548 ↗
38. 38. D. Bouchard, J. S. Kirkaldy: Metall. Mater. Trans. B, 1997, vol. 28, pp. 651-63.10.1007/s11663-997-0039-x ↗
39. K. N. Prabhu, A. A. Ashis: Mater. Manuf. Process, 2002, vol. 17, pp. 469–81.10.1081/AMP-120014230 ↗
40. S. Louhenkilpi, M. Mäkinen, S. Vapalahti, T. Räisänen, J. Laine: Mat. Sci. Eng. A-Struct., 2005, vol. 413–414, pp. 135–38.10.1016/j.msea.2005.08.153 ↗
41. H. M. Şahin, K. Kocatepe, R. Kayikci, N. Akar: Energy Convers. Manage., 2006, vol. 47, pp. 19–34.10.1016/j.enconman.2005.03.021 ↗
42. D. S. Sui, Z. S. Cui: Trans. Nonferrous Met. Soc. China, 2008, vol. 18, pp. 399–404.10.1016/S1003-6326(08)60070-9 ↗
43. P. R. Goulart, J. E. Spinelli, N. Cheung, I. L. Ferreira, A. Garcia: J. Alloys Comp., 2009, vol. 470, pp. 589-99.10.1016/j.jallcom.2008.03.026 ↗
44. 44. A. Kumar, P. Dutta: J. Mater. Sci., 2009, vol. 44, pp. 3952–61.10.1007/s10853-009-3539-z ↗
45. M. Amoorezaei, S. Gurevich, N. Provatas: Acta Mater., 2010, vol. 58, pp. 6115-24.10.1016/j.actamat.2010.07.029 ↗
46. 46. E. Hajjari, M. Divandari, S. H. Razavi, S. M. Emami, S. Kamado: Appl. Surf. Sci., 2011, vol. 257, pp. 5077–82.10.1016/j.apsusc.2011.01.024 ↗
47. 47. W. R. Osório, J. E. Spinelli, N. Cheung, A. Garcia: Mat. Sci. Eng. A-Struct., 2006, vol. 420, pp. 179–86.10.1016/j.msea.2006.01.058 ↗
48. 48. M. Dias, T. Costa, O. Rocha, J. E. Spinelli, N. Cheung, A. Garcia: Mater. Character., 2015, vol. 106, pp. 52-61.10.1016/j.matchar.2015.05.015 ↗
49. 49. N. C. Verissimo, C. Brito, W. R. L. Santos, N. Cheung, J. E. Spinelli, A. Garcia: J. Alloys Comp., 2016, vol. 662, pp. 1-10.10.1016/j.jallcom.2015.11.117 ↗
50. 50. C. A. Siqueira, N. Cheung, A. Garcia: Metall. Mater. Trans. A, 2002, vol. 33, pp. 2107-18.10.1007/s11661-002-0042-4 ↗
51. 51. J.A. Spittle: Int. Mater. Rev., 2006, vol. 51, pp. 247-69.10.1179/174328006X102493 ↗
52. A.E. Ares and C.E. Schvezov (2007) Metall. Mater. Trans. A, 38: 1485-9910.1007/s11661-007-9111-z ↗
53. Z. Liu. D. Qiu, F. Wang, J.A. Taylor, M. Zhang (2015) Mater. Character., 106: 1-10.10.1016/j.matchar.2015.05.011 ↗
54. C. Brito, G. Reinhart, H. Nguyen-Thi, N. Mangelinck-Noël, N. Cheung, J. E. Spinelli, A. Garcia (2015) J. Alloys Compd., 636: 145-9.10.1016/j.jallcom.2015.02.140 ↗
55. 55. R. Trivedi, J. A. Sekhar, V. Seetharaman: Metall. Trans. A, 1989, vol. 20, pp. 769-77.10.1007/BF02667594 ↗
56. 56. W. W. Mullins, R. F. Sekerka: J. Appl. Phys., 1964, vol. 35, pp. 444-51.10.1063/1.1713333 ↗
57. 57. O. L. Rocha, C. A. Siqueira, A. Garcia: Mater. Sci. Eng. A-Struct., 2003, vol. 361, pp. 111-8.10.1016/S0921-5093(03)00518-5 ↗
58. 58. D. Ma, Y. Li, S. C. Ng, H. Jones: Acta. Mater., 2000, vol. 48, pp. 419-31.10.1016/S1359-6454(99)00365-1 ↗
59. 59. D. Ma, Y. Li, S. C. Ng, H. Jones: Sci. Technol. Adv. Mater., 2001, vol. 2, pp. 127-30.10.1016/S1468-6996(01)00038-9 ↗
60. 60. W. Xu, Y. P. Feng, Y. Li, G. D. Zhang, Z. Y. Li: Acta Mater., 2002, vol. 50, pp. 183-93.10.1016/S1359-6454(01)00321-4 ↗
61. 61. W. Xu, Y. P. Feng, Y. Li, Z. Y. Li: Mater. Sci. Eng. A-Struct., 2004, vol. 373, pp. 139-45.10.1016/j.msea.2004.01.022 ↗
62. C. Brito, C. A. Siqueira, J. E. Spinelli, A. Garcia: Mater. Lett., 2012, vol. 80, pp. 106-9.10.1016/j.matlet.2012.04.095 ↗
63. 63. M. Dias, C. Brito, F. Bertelli, A. Garcia: Mater. Chem. Phys., 2014, vol. 143, pp. 895-9.10.1016/j.matchemphys.2013.11.030 ↗
64. 64. W. L. R. Santos, C. Brito, J. M. V. Quaresma, J. E. Spinelli, A. Garcia: Mater. Sci. Eng. B-Solid., 2014, vol. 182, pp. 29-36.10.1016/j.mseb.2013.11.016 ↗
65. 65. W. L. R. Santos, C. Brito, F. Bertelli, J. E. Spinelli, A. Garcia: J. Alloys Comp., 2015, vol. 647, pp. 989-96.10.1016/j.jallcom.2015.05.195 ↗
66. 66. K. A.Jackson, J. D. Hunt: Trans. TMS-AIME, 1966, vol. 236, pp. 1129-42.
67. 67. A. Garcia, T. W. Clyne, M. Prates: Metall. Trans. B, 1979, vol. 10, pp. 85-92.10.1007/BF02653977 ↗
68. 68. I. L. Ferreira, C. A. Santos, V. R.Voller, A. Garcia: Metall. Mater. Trans. B, 2004, vol. 35, pp.285-97.10.1007/s11663-004-0030-8 ↗
69. 69. J. E. Spinelli, N. Cheung, A. Garcia: Philos. Mag., 2011, vol. 91, pp. 1705-23.10.1080/14786435.2010.545779 ↗
70. M. A. P. Castanho, P. R. Goulart, C. Brito, J. E. Spinelli, N. Cheung, A. Garcia: Mater. Sci. Technol., 2015, vol. 31, pp. 105-13.10.1179/1743284714Y.0000000616 ↗