Effect of Tungsten on Primary Creep Deformation and Minimum Creep Rate of Reduced Activation Ferritic-Martensitic Steel
Source abstract
Abstract
Effect of tungsten on transient creep deformation and minimum creep rate of reduced activation ferritic-martensitic (RAFM) steel has been assessed. Tungsten content in the 9Cr-RAFM steel has been varied between 1 and 2 wt pct, and creep tests were carried out over the stress range of 180 and 260 MPa at 823 K (550 °C). The tempered martensitic steel exhibited primary creep followed by tertiary stage of creep deformation with a minimum in creep deformation rate. The primary creep behavior has been assessed based on the Garofalo relationship, $$ \varepsilon = \varepsilon_{\text{o}} + \varepsilon_{\text{T}} [1-\exp (-r\prime \cdot t)] + \dot{\varepsilon }_{\text{m}} \cdot t $$ , considering minimum creep rate $$ \dot{\varepsilon }_{\text{m}} $$ instead of steady-state creep rate $$ \dot{\varepsilon }_{\text{s}} $$ . The relationships between (i) rate of exhaustion of transient creep r′ with minimum creep rate, (ii) rate of exhaustion of transient creep r′ with time to reach minimum creep rate, and (iii) initial creep rate $$ \dot{\varepsilon }_{\text{i}} $$ with minimum creep rate revealed that the first-order reaction-rate theory has prevailed throughout the transient region of the RAFM steel having different tungsten contents. The rate of exhaustion of transient creep r′ and minimum creep rate $$ \dot{\varepsilon }_{\text{m}} $$ decreased, whereas the transient strain ɛ T increased with increase in tungsten content. A master transient creep curve of the steels has been developed considering the variation of $$ \frac{{\left( {\varepsilon - \varepsilon_{\text{o}} } \right)}}{{\varepsilon_{\text{T}} }} $$ with $$ \frac{{\dot{\varepsilon }_{\text{m}} \cdot t}}{{\varepsilon_{\text{T}} }} $$ . The effect of tungsten on the variation of minimum creep rate with applied stress has been rationalized by invoking the back-stress concept.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fusion materials and technologies · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. R.L. Klueh and D.R. Harries: High-Chromium Ferritic and Martensitic Steels for Nuclear Applications, 2001: ASTM Stock Number: MONO3.10.1520/MONO3-EB ↗
2. T. Noda, F. Abe, H. Araki and M. Okada; Journal of Nuclear Materials, 141-143, (1986) 1102-1106.10.1016/0022-3115(86)90149-2 ↗
3. M. Tamura, H. Hayakawa, A. Yoshitake, A. Hishinuma and T. Kondo; Journal of Nuclear Materials 155-157 (1988) 620-625.10.1016/0022-3115(88)90384-4 ↗
4. D.R. Harries, G.J. Butterworth, A. Hishinuma and F.W. Wiffen; Journal of Nuclear Materials 191-194 (1992) 92-99.10.1016/S0022-3115(09)80015-9 ↗
5. R. Lindau, A. Möslang, M. Rieth, M. Klimiankou, E. Materna-Morris, A. Alamo, A.-A.F. Tavassoli, C. Cayron, A.-M. Lancha, P. Fernandez, N. Baluc, R. Schäublin, E. Diegele, G. Filacchioni, J.W. Rensman, B.v.d. Schaaf, E. Lucon, and W. Dietz: Fus. Eng. Des., 2005, vols. 75–79, pp. 989–96.10.1016/j.fusengdes.2005.06.186 ↗
6. M. Reith, M. Schirra, A. Falkenstein, P. Grof, S. Heger, H. Kempe, R. Lindau, and H. Zimmermann: KZKA 6911 report, 2003.
7. A.-A.F. Tavassoli, A. Alamo, L. Bedel, L. Forest, J.-M. Gentzbittel, J.-W. Rensman, E. Diegele, R. Lindau, M. Schirra, R. Schmitt, H.C. Schneider, C. Petersen, A.-M. Lancha, P. Fernandez, G. Filacchioni, M.F. Maday, K. Mergia, N. Boukos, Baluc, P. Spätig, E. Alves, and E. Lucon: J. Nucl. Mater., 2004, vols. 329–333, pp. 257–62.10.1016/j.jnucmat.2004.04.020 ↗
8. N. Baluc, K. Abe, J.L. Boutard, V.M. Chernov, E. Diegele, S. Jitsukawa, A. Kimura, R.L. Klueh, A. Kohyama, R.J. Kurtz, R. Lässer, H. Matsui, A. Möslang, T. Muroga, G.R. Odette, M.Q. Tran, B. van der Schaaf, Y. Wu, J. Yu, and S.J. Zinkle: Vul. Fus., 2007, vol. 47, pp. S696–S717.10.1088/0029-5515/47/10/S18 ↗
9. A. Alamo, J. C. Brachet, A. Castaing, C. Lepoittevin and F. Barcelo; J. Nucl. Mater., 258-263 (1998) 1228-1235.10.1016/S0022-3115(98)00190-1 ↗
10. F. Abe, S. Nakazawa, H. Araki,T. Noda; Metall. Trans. A 23A (1992) 469-477.10.1007/BF02801164 ↗
11. D. Sidey and B. Wilshire; Metal Science Journal, 1969, Vol.3, pp. 56-60.10.1179/msc.1969.3.1.56 ↗
12. F. Garofalo: Fundamentals of Creep and Creep Rupture in Metals. MacMillan, New York, 1965.
13. G. A. Webster, A.P.D. Cox and J.E. Dorn; Metal. Sci. J. 3, (1969) 221-225.10.1179/msc.1969.3.1.221 ↗
14. W. J. Evans and B. Wilshire; Metallurgical Transactions, Aug 1970, Vol.1, pp. 2133-2139.10.1007/BF02643426 ↗
15. B. K. Choudhary, C. Phaniraj, K. Bhanu Sankara Rao and S. L. Mannan; ISIJ International, 41 (2001) S73-S80.10.2355/isijinternational.41.Suppl_S73 ↗
16. C. Phaniraj, M. Nandagopal, S.L. Mannan and P. Rodriguez; Acta Metall. Mater., 1991, Vol.39, No.7, pp. 1651-1656.10.1016/0956-7151(91)90253-W ↗
17. F. Abe and S. Nakazawa; Metall. Trans. A, 23A (1992) 3025-3034.10.1007/BF02646120 ↗
18. E. IsaacSamuel, B. K. Choudhary, K. BhanuSankaraRao and B. Raj: Pressure Vessels and Piping: Materials and Properties. Narosa Publishing House, New Delhi, 2008, pp. 83–100.
19. P.W. Davies, W. J. Evans, K. R. Williams and B. Wilshire; Scripta Metallurgica, 1969, vol. 3, pp. 671-674.10.1016/0036-9748(69)90074-X ↗
20. K.E. Amin, A. K. Mukherjee and J. E. Dorn; J. Mech. Phys. Solids, 1970, Vol. 18, 413-426.10.1016/0022-5096(70)90018-9 ↗
21. A. Ahmadieh and A.K.Mukherjee; Materials Science and Engineering. 21 (1975) 115-124.10.1016/0025-5416(75)90205-0 ↗
22. Joon Sik Park, Sung Joon Kim and Chong Soo Lee; Mater. Sci. Eng. A298, (2001) 127-136.10.1016/S0921-5093(00)01291-0 ↗
23. Kouichi Maruyama, Kota SAWADA and Jun-ichi KOIKE; ISIJ International, Vol. 41 (2001), No.6, 641-653.10.2355/isijinternational.41.641 ↗
24. J. Vanaja, K. Laha, R. Mythili, K. S. Chandravathi, S. Saroja and M. D. Mathew; Mater. Sci. Eng., 533 (2012) 17– 25.10.1016/j.msea.2011.10.112 ↗
25. K. Sawada, K. Kubo, F. Abe; Mater. Sci. Eng. A, 319–321 (2001) 784–787.10.1016/S0921-5093(01)00973-X ↗
26. F. Abe, H. Araki and T. Noda; Met Trans-A, Vol. 22A, (1991), 2225 – 2235.10.1007/BF02664988 ↗
27. S. G. Hong, W. B. Lee and C. G. Park; J. Nucl. Mater., 288 (2001) 202-207.10.1016/S0022-3115(00)00558-4 ↗
28. J. Cermak, J. Kucera, B. Million and J. Krumpos; Kov. Mater., 18 (1980) 537-47.
29. P. J. Ennis and A. Czyrska-Filemonowicz; Sadhana, 28 (3-4) (2003) 709-730.10.1007/BF02706455 ↗
30. NIMS creep data sheet, Atlas of creep deformation property No. D-1, 2007.
31. K. Kimura, K. Sawada and H. Kushima: Proc. 3rd Symp. Heat Res. Steels Alloys High Effic, USC Power Plants, Japan, 2009.
32. J. Čadek: Creep in Metallic Materials. Elsevier, Amsterdam, 1988.
33. R. Lagneborg, B. Bergman; Metal Sci. J., 10 (1976) 20-28.10.1179/030634576790431462 ↗
34. H. J. Frost and M. F. Ashby: Deformation-Mechanism Maps-The Plasticity and Creep of Metals and Ceramics, 1st edn. Pergamon Press, New York, 1982, pp. 62.