journal article·2004-10

Tensile and fatigue behavior of Al-based metal matrix composites reinforced with continuous carbon or alumina fibers: Part I. Quasi-unidirectional composites

M. Jacquesson, A. Girard, M.-H. Vidal-Sétif, R. Valle

Publisher page

Abstract

The thermomechanical (dilatometric, tensile, and fatigue) behavior of Al-based metal matrix composites (MMCs) is investigated. These composites are reinforced by quasi-unidirectional (quasi-UD) woven fabric preforms with 90 pct of continuous fibers in the longitudinal direction and 10 pct in the transverse direction. The two composite systems investigated feature a highly ductile matrix (AU2: Al-2Cu wt pct) with a strongly bonded fiber-matrix interface (N610 alumina fibers) and an alloyed, high-strength matrix (A357: Al-7Si-0.6Mg wt pct) with a weak fiber-matrix interface (K139 carbon fibers). Microstructural investigation of the tested specimens has permitted identification of the specific characteristics of these composites: undulation of the longitudinal bundles, presence of the straight transverse bundles, interply shearing, and role of brittle phases. Moreover, simple semiquantitative models (e.g., interply shearing) have enabled explanation of the specific mechanical behavior of these quasi-UD composites, which exhibit high tensile and fatigue strengths, as compared with the corresponding pure UD composites. Knowledge of the specific characteristics and mechanical behavior of these quasi-UD composites will facilitate the further investigation of the (0, ±45, 90 deg) quasi-UD laminates (Part II). At a more theoretical viewpoint, the specific geometry and behavior of these quasi-UD composites allows exacerbation of fatigue mechanisms, even more intense than in “model” composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. M. Rabinovitch, M.-H. Vidal-Sétif, J.-C. Daux, J.-L. Raviart, R. Mévrel, M. Lancin, and O. Perez: Proc. 9th Int. Conf. on Composite Materials (ICCM-9), A. Miravete, ed., Madrid, 1993, University of Zaragoza, Woodhead, Cambridge, United Kingdom, 1993, vol. 1, pp. 683–690.
2. J. Pora, P. Le Vacon, and M. Rabinovitch: Proc. 6th Int. Conf. on Aluminium Alloys (ICAA-6), Toyohashi, Japan, 1998, The Japan Institute of Light Metals, Tokyo, Japan, 1998, vol. 3, pp. 1867–72.
3. M.-H. Vidal-Sétif, M. Lancin, C. Marhic, R. Valle, J.-L. Raviart, J.-C. Daux, and M. Rabinovitch: Mater. Sci. Eng., 1999, vol. A272, pp. 321–33.10.1016/S0921-5093(99)00487-6 ↗
4. J. Pora, P. Le Vacon, C. Carré, P. Santini, C. Schneider, and P. Merle: Proc. 10th Int. Conf. on Composite Materials (ICCM-10), A. Poursartip and K. Street, eds., Whistler, BC, Canada, 1995; 10th Int. Conf. on Composite Materials Society, Woodhead, Pub. Cambridge, United Kingdom, 1995, vol. 2, pp. 19–26.
5. R.S. Bushby: Mater. Sci. Technol., 1998, vol. 14, pp. 877–86.10.1179/026708398790613542 ↗
6. H.E. Dève and C. McCullough: J. Met., 1995, vol. 47, pp. 33–37.
7. U. Ramamurty, F.W. Zok, F.A. Leckie, and H.E. Dève: Acta Mater., 1997, vol. 45, pp. 4603–13.10.1016/S1359-6454(97)00133-X ↗
8. C. McCullough, H.E. Dève, and T.E. Channel: Mater. Sci. Eng., 1994, vol. A189, pp. 147–54.10.1016/0921-5093(94)90410-3 ↗
9. W. Zhang, M. Gu, J. Chen, Z. Wu, F. Zhang, and H.E. Dève: Mater. Sci. Eng., 2003, vol. A341, pp. 9–17.10.1016/S0921-5093(02)00208-3 ↗
10. M. Jacquesson: Doctorate Thesis, INSA, Lyon, 2000.
11. M. Jacquesson, M.-H. Vidal-Sétif, R. Valle, N. Godin, A. Girard, and R. Fougères: Mater. Sci. Technol., 2000, vol. 16, pp. 830–36.10.1179/026708300101508513 ↗
12. R. Valle, M.-H. Vidal-Sétif, D. Schuster, and P. Le Vacon: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3307–17.10.1007/s11661-004-0072-1 ↗
13. R. Valle, H. Octor, and J.-F. Stohr: Phil. Mag., 1992, vol. 65A, pp. 177–93.10.1080/01418619208201487 ↗
14. J. Zhang and C. Laird: Mater. Sci. Eng., 2000, vol. A283, pp. 126–35.10.1016/S0921-5093(99)00798-4 ↗
15. J. Zhang and C. Laird: Mater. Sci. Eng., 2001, vol. A314, pp. 150–56.10.1016/S0921-5093(00)01923-7 ↗
16. P. Santini: Doctorate Thesis, INSA, Lyon, 1996.
17. M.-S. Hu, J. Yang, H.C. Cao, A.G. Evans, and R. Mehrabian: Acta Metall. Mater., 1992, vol. 40, pp. 2315–26.10.1016/0956-7151(92)90150-D ↗
18. C.H. Weber, X. Chen, S.J. Connell, and F.W. Zok: Acta Metall. Mater., 1994, vol. 42, pp. 3443–50.10.1016/0956-7151(94)90477-4 ↗
19. W.A. Curtin: J. Am. Ceram. Soc., 1991, vol. 74, pp. 2837–45.10.1111/j.1151-2916.1991.tb06852.x ↗
20. P. Bystricky, H. Bjerregård, and A. Mortensen: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1843–66.10.1007/s11661-999-0183-9 ↗
21. B. Moser, A. Rossoll, L. Weber, O. Beffort, and A. Mortensen: Acta Mater., 2004, vol. 52, pp. 573–81.10.1016/j.actamat.2003.09.040 ↗
22. T. Ishikawa and T.-W. Chou: J. Comp. Mater., 1983, vol. 17, pp. 92–104.10.1177/002199838301700201 ↗
23. N.K. Naik and P.S. Shembekar: J. Comp. Mater., 1992, vol. 26, pp. 2196–225.10.1177/002199839202601502 ↗
24. M. Ito and T.-W. Chou: Comp. Sci. Technol., 1997, vol. 57, pp. 787–800.10.1016/S0266-3538(97)00044-4 ↗
25. A. Kelly and G.J. Davies: Metall. Rev., 1965, vol. 10, pp. 1–77.10.1179/095066065790138357 ↗
26. R. Hill: J. Mech. Phys. Solids, 1964, vol. 12, pp. 199–212.10.1016/0022-5096(64)90019-5 ↗
27. Z. Hashin: Appl. Mech. Rev., 1964, vol. 17, pp. 1–9.
28. Z. Hashin: J. Appl. Mech., 1983, vol. 50, pp. 481–505.10.1115/1.3167081 ↗
29. W. Weibull: J. Appl. Mech., 1951, vol. 18, pp. 293–97.10.1115/1.4010337 ↗
30. B.D. Coleman: J. Mech. Phys. Solids, 1958, vol. 7, pp. 60–70.10.1016/0022-5096(58)90039-5 ↗
31. S. van der Zwaag: J. Testing Evaluation, 1989, vol. 17, pp. 292–98.10.1520/JTE11131J ↗
32. P.S. Turner: J. Res. Nat. Bur. Standards, 1946, vol. 37, pp. 239–50.10.6028/jres.037.015 ↗
33. R.A. Schapery: J. Comp. Mater., 1968, vol. 2, pp. 380–404.10.1177/002199836800200308 ↗
34. S. Rojstaczer, D. Cohn, and G. Marom: J. Mater. Sci. Letter., 1985, vol. 4, pp. 1233–36.10.1007/BF00723467 ↗
35. V.M. Levin: Mekhanika Tverdogo Tela, 1967, vol. 2, pp. 88–94; Mech. Solids, 1967, vol. 2, pp. 58–61.
36. R. Valle: Phil. Mag., 1992, vol. 65A, pp. 149–76.10.1080/01418619208201486 ↗
37. A. Brunet, R. Valle, and A. Vassel: Acta Mater., 2000, vol. 48, pp. 4763–74.10.1016/S1359-6454(00)00285-8 ↗