Developing the Processing Maps Using the Hyperbolic Sine Constitutive Equation
Source abstract
Abstract
Hot compression tests were performed on a duplex stainless steel at temperatures ranging from 1223 K to 1473 K (950 °C to 1200 °C) and strain rates from 0.001 to 100 s−1. The constitutive analysis of flow stress was carried out using the hyperbolic sine function, and the material constants were determined at two typical strains of 0.3 and 0.7. The power dissipation map, instability map, and processing map for the material were developed for strains of 0.3 and 0.7. The developed processing maps were based on the hyperbolic sine as well as the conventional power-law constitutive equations. The efficiency of power dissipation (η) varied from 12 to 60 pct over the studied temperature and strain rate. The highest value of η was obtained at strain rates below 0.01 s−1, whereas the lowest value of η was observed at the intermediate strain rates. The instability region in sin h-based processing map was only observed in the range of 1423 K to 1473 K (1150 °C to 1200 °C) and at a strain rate of 100 s−1, while the conventional processing map did not predict any instability region. Optical microscopy observations were more consistent with the results of the sin h-based processing map and indicated that the instability regime at high temperatures and high strain rates was due to the development of adiabatic shear bands.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. G.R. Ebrahimi, H. Keshmiri, A. Momeni, M. Mazinani: Mater. Sci. Eng. 2011, A528, pp. 7488–7493.10.1016/j.msea.2011.05.081 ↗
2. A. Dehghan-Manshadi, M.R. Barnett, P.D. Hodgson: Met. Mater. Trans., 2008, 39A, pp. 1359-1370.10.1007/s11661-008-9512-7 ↗
3. M. Yazdani, S.M. Abbasi, A. Momeni, A. Karimi Taheri: Mater Design, 2011, 32, pp. 2956-2962.10.1016/j.matdes.2011.01.051 ↗
4. R. Raj: Metall. Trans., 1981, 12A, pp. 1089-97.10.1007/BF02643490 ↗
5. B. Bozzini, E. Cerri: J. Nucl. Mater., 2002, 328, pp. 344-347.
6. Y.V.R.K. Prasad, H.J. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, L.A. Lark, D.R. Barker: Metall. Trans., 1984, 15A, pp. 1883-1892.10.1007/BF02664902 ↗
7. H. Ziegler: in Progress in Solid Mechanics, vol. 4, I.N. Sneedon, and R. Hill, Wiley, New York, NY, 1963, pp. 63-193.
8. Y.V.R.K. Prasad: Ind. J. Technol., 1990, 28, pp. 435-451.
9. Y.V.R.K. Prasad, T. Seshacharyulu: Int. Mater. Rev., 1998, 43, pp. 243-258.10.1179/095066098790105618 ↗
10. Y.V.R.K. Prasad: J. Mater. Eng. Perform., 2003,12, pp. 638-645.10.1361/105994903322692420 ↗
11. I. Philipart, H.J. Rack: Mater. Sci. Eng., 1998, A254, pp. 253-267.10.1016/S0921-5093(98)00619-4 ↗
12. A. Momeni, S.M. Abbasi, H. Badri: Appl. Math. Modell., 2012, 36, pp. 5624-5632.10.1016/j.apm.2012.01.008 ↗
13. Y.C. Lin, M.S. Chen, J. Zhong: Comp. Mater. Sci., 2008, 42, pp. 470-477.10.1016/j.commatsci.2007.08.011 ↗
14. Y.C. Lin, X.M. Chen: Mater. Des., 2011, 32, pp. 1733–1759.10.1016/j.matdes.2010.11.048 ↗
15. A. Momeni, K. Dehghani, G.R. Ebrahimi, H. Keshmiri: Met. Mater. Trans., 2010, 41A, pp. 2898-2904.10.1007/s11661-010-0350-z ↗
16. M. Mirzaee, H. Keshmiri, G.R. Ebrahimi, A. Momeni: Mater. Sci. Eng., 2012, 551, pp. 25– 31.10.1016/j.msea.2012.04.063 ↗
17. F. Garofalo; Fundamentals of Creep and Creep-Rupture in Metals. Macmillan Company, New York, NY, 1966.
18. A. Momeni, K. Dehghani: Met. Mater. Trans., 2011, 42A, pp. 1925-1932.10.1007/s11661-010-0565-z ↗
19. S.V.S. Narayana Murty, B. Nageswara Rao, B.P. Kashyap: Modell. Simul. Mater. Sci. Eng. 2002, 10, pp. 503-520.10.1088/0965-0393/10/5/303 ↗
20. S.V.S. Narayana Murty, B. Nageswara Rao: Mater. Sci. Eng., 1998, A254, pp. 76-82.10.1016/S0921-5093(98)00764-3 ↗
21. S.V.S. Narayana Murty, B. Nageswara Rao: Mater. Sci. Technol., 1998, 14, pp. 835-837.10.1179/026708398790301070 ↗
22. S.V.S. Narayana Murty, M.S. Sarma, B. Nageswara Rao: Metall. Mater. Trans. A., 1997, 28A, pp. 1581-1582.10.1007/s11661-997-0219-y ↗
23. A. Momeni, K. Dehghani: Mater. Sci. Eng., 2011, 528, pp. 1448–1454.10.1016/j.msea.2010.11.020 ↗
24. R. Ebrahimi, A. Najafizadeh: Int. J. of ISSI, 2004, 1, pp. 1-7.
25. G.W. Fan, J. Liu, P.D. Han, G.J. Qiao: Mater. Sci. Eng., 2009, A515, pp. 108-112.10.1016/j.msea.2009.02.022 ↗
26. A. Momeni, K. Dehghani, X.X. Zhang: J. Mater. Sci., 2011, 47, pp. 2966-2974.10.1007/s10853-011-6130-3 ↗