Structure and Properties of a Low-Carbon, Microalloyed, Ultra-High-Strength Steel
Source abstract
Abstract
The current study concerns the development of a low-carbon, microalloyed ultra-high-strength steel on a pilot scale. The continuous cooling transformation has been evaluated, and a flat top “C” curve with a mixed microstructure of bainite and martensite has been obtained at a lower transformation temperature. The steel has been processed thermomechanically, followed by air cooling and water quenching. In addition, a variation in microstructure and mechanical properties at different finish rolling temperatures has been studied. Although a mixture of granular bainite and bainitic ferrite with interlath and intralath precipitation of NbC/NbC(N)/TiC(N) particles are the characteristic microstructural feature of air-cooled steel, the lath martensitic structure along the fine NbC/NbC(N)/TiC(N) precipitate is obtained in case of a water-quenched steel. The high-strength value obtained in the current steel is caused by the accumulated contribution of fine-grained, pancaked austenite, highly dislocated fine lath martensitic structure along with the presence of tiny precipitates of microalloy carbide/carbonitride.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. K.A. Taylor and S.S. Hansen: Metall. Trans., 1990, vol. 21A, pp. 1697-08.10.1007/BF02672586 ↗
2. R.K. Weiss and S.W. Thompson: Physical Metallurgy of Direct – Quenched Steels, K.A. Taylor, S.W. Thompson, and F.B. Fletcher, eds., TMS, Warrendale, PA, 1992, pp. 107–38.
3. T. Koseki, K. Amano, M. Imanaka, C. Shiga, and S. Ueda: Physical Metallurgy of Direct – Quenched Steels, K.A. Taylor, S.W. Thompson, and F.B. Fletcher, eds., TMS, Warrendale, PA, 1992, pp. 297–10.
4. I. Kozasu: Thermomechanical Processing of Steels and Other Materials, T. Chandra and T. Sakai, eds., TMS, Warrendale, PA, 1997, pp. 47–55.
5. C. Ouchi: Iron Steel Inst. Jpn. Int., 2001, vol. 41, pp. 542–53.10.2355/isijinternational.41.542 ↗
6. E.J. Czyryca: Key Eng. Mater., 1993, vol. 84-85, pp. 491-20.10.4028/www.scientific.net/KEM.84-85.491 ↗
7. C.I. Garcia, A.J. DeArdo, E. Raykin, and J.D. Defilippi: High Performance Steels for Structural Applications, ASM INTERNATIONAL, Cleveland, OH, 1995, pp. 155–60.
8. MIL-S-24371B (SH), Steel Plate, Structural High Yield Strength (HY-130), 1989.
9. S. Akhlaghi and D.G. Ivey: Can. Metall. Quart., 2002, vol. 41, pp. 111-19.10.1179/cmq.2002.41.1.111 ↗
10. M. Miller: Image J Software, http://rsb.info.nih.gov/ij.
11. International Institute of Welding (IIW), 1967, Doc. IX – 537-67.
12. F.B. Pickering: Microalloying ‘75, Union Carbide Corp., New York, NY, 1977, pp. 9-31.
13. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Trans., 1990, vol. 21A, pp. 1493-507.10.1007/BF02672564 ↗
14. A. Ghosh, S. Das, S. Chatterjee, B. Mishra, and P. Ramachandra Rao: Mater. Sci. Eng. A, 2003, vol. A348, pp. 299-308.10.1016/S0921-5093(02)00735-9 ↗
15. A. Ghosh, S. Das, and S. Chatterjee: Mater. Sci. Technol., 2005, vol. 21, pp. 325-33.10.1179/174328405X27043 ↗
16. A. Ghosh, B. Mishra, S. Das, and S. Chatterjee: Mater. Sci. Eng. A, 2005, vol. A396, pp. 320-32.10.1016/j.msea.2005.01.050 ↗
17. ASM International, ASM Metals Hand Book: Properties and Selection: Iron; Steels and High Performance Alloys, 10th ed., vol. 1, ASM INTERNATIONAL, Materials Park, OH, 1995, pp. 389–423.
18. M. Prikryl, A. Kroupa, G.C. Weatherly, and S.V. Subramanian: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1149-65.10.1007/BF02649854 ↗
19. K.J. Irvine, F.B. Pickering, and T. Gladman: J. Iron Steel Inst., 1967, vol. 205, pp. 161-82.
20. T. Gladman, D. Dulien, and D.I. McIvoy: Microalloying ‘75, Union Carbide Corporation, New York, NY, 1977, pp. 32-58.
21. S. S. Hansen, J. B. Vander Sande, and M. Cohen: Metall. Trans. A, 1980, vol. 11A, pp. 387-402.10.1007/BF02654563 ↗
22. R.A.P. Djaic and J.J. Jonas: J. Iron Steel Inst., 1972, vol. 210, pp. 256-61.
23. H.L. Andrade, M.G. Akben, and J.J. Jonas: Metall. Trans. A, 1983, vol. 14A, pp. 1967-77.10.1007/BF02662364 ↗
24. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1557-71.10.1007/BF02649815 ↗
25. T. Tanaka, N. Tabata, and T. Hatomura: Microalloying ‘75, Union Carbide Corporation, New York, NY, 1977, pp. 107-19.
26. H.J. Leber, C.I. Garcia, E.J. Palmiere, and A.J. DeArdo: Processing, Microstructure and Properties of HSLA Steel, TMS, Warrendale, PA, 1988, pp. 425–33.
27. G. Chen, W. Yang, S. Guo, and Z. Sun: Mater. Sci. Forum, 2005, vols. 475–479, pp. 105-08.10.4028/www.scientific.net/MSF.475-479.105 ↗
28. E.J. Czyryca and R.E. Link: David Taylor Research Center Report DTRC-SME-88/64, January 1990.
29. B. Dutta, E. Valdes, and C.M. Sellars: Acta Metall., 1992, vol. 40, pp. 653-62.10.1016/0956-7151(92)90006-Z ↗
30. S. F. Medina, M. Chapa, P. Valles, A. Quispe, and M.I. Vega: Iron Steel Inst. Jpn. Int., 1999, vol. 39, pp. 930-36.10.2355/isijinternational.39.930 ↗