Effect of Strain and Strain Path on Texture and Twin Development in Austenitic Steel with Twinning-Induced Plasticity
Source abstract
Abstract
High-manganese (15 to 30 wt pct) austenitic steels exhibit extreme strain hardening because of twinning with increased strain. Twinning in these low stacking fault materials promotes retention of the austenitic microstructure and impedes dislocation motion. A dearth of information is available concerning the extent to which strain path influences twinning in so-called twinning-induced plasticity (TWIP) steels. The present study focuses on the influence of strain level and strain path on texture and twinning in a high-Mn content TWIP steel (Fe17.2Mn0.6C). Electron back-scatter diffraction was employed to measure the twin fraction, twin deviation, twin boundary length, grain misorientation, and volume fraction of different texture components as a function of both uniaxial and biaxial deformation. This information, which is part of the necessary first step toward linking crystallographic texture and twinning to mechanical properties, was used to quantitatively assess the extent to which these critical metallurgical features depend on the amount of straining and the strain path.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. J.A. Jiménez and G. Frommeyer: Mater. Charact., 2010, vol. 61, pp. 221–26.10.1016/j.matchar.2009.11.013 ↗
2. F. de las Cuevas, M. Reis, A. Ferraiuolo, G. Pratolongo, L.P. Karjalainen, J. Alkorta, and J. Gil Sevillano: Key. Eng. Mater., 2009, vol. 423, pp. 147–52.10.4028/www.scientific.net/KEM.423.147 ↗
3. C.D. Horvath and J.R. Fekete: Proc. Int. Conf. on Advanced High Strength Sheet Steels for Automotive Applications, 2004, pp. 3–10.
4. J.E. Jin and Y.K. Lee: Mater. Sci. Eng. A, 2009, vol. 527A, pp. 157–61.10.1016/j.msea.2009.08.028 ↗
5. S. Allain, P. Cugy, C. Scott, J.P. Chateau, A. Rusinek, and A. Deschamps: Int. J. Mater. Res., 2008, vol. 99, pp. 734–38.10.3139/146.101693 ↗
6. B.C. De Cooman, L. Chen, H.S. Kim, Y. Estrin, S.K. Kim, and H. Voswinckel Microstructure and Texture in Steels, A. Halder, S. Suwas, and D. Bhattacharjee, eds., Springer, New York, NY, 2009, pp. 165–82.10.1007/978-1-84882-454-6_10 ↗
7. P. Zavattieri, V. Savic, L.G. Hector, Jr., J.R. Fekete, W. Tong, and Y. Xuan: Int. J. Plast., 2009, vol. 25, pp. 2298–330.10.1016/j.ijplas.2009.02.008 ↗
8. O. Grässel, L. Krüger, G. Frommeyer, and L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–409.10.1016/S0749-6419(00)00015-2 ↗
9. S. Kim and H. Huh: Key. Eng. Mater., 2008, vols. 385–387, pp. 749–52.10.4028/www.scientific.net/KEM.385-387.749 ↗
10. B. Qin and H.K.D.H. Bhadeshia: Mater. Sci. Tech., 2008, vol. 24, pp. 969–73.10.1179/174328408X263688 ↗
11. G. Krauss: Steels—Heat Treatment and Processing Principles, ASM International, Materials Park, OH, 1990.
12. M. Iker, D. Gaude-Fugarolas, P.J. Jacques, and F. Delannay: Adv. Mater. Res., 2007, vols. 115–117, pp. 852–67.10.4028/www.scientific.net/AMR.15-17.852 ↗
13. S.K. Mishra, P. Pant, K. Narasimhan, and I. Samajdar: Ceramic Trans., 2008, vol. 200, pp. 257–63.10.1002/9780470444191.ch28 ↗
14. A.S. Hamada: Ph.D. Dissertation, University of Oulu, Linnanmaa, Finland, 2007.
15. B. Qin: Master’s Thesis, Pohang University, Pohang, Kyungbuk, Republic of Korea, 2007.
16. S. Cunningham: Master’s Thesis, McGill University, Montreal, CA, 1999.
17. K. Renard, S. Ryelandt, and P.J. Jacques: Mater. Sci. Eng. A, 2010, vol. 527A, pp. 2969–77.10.1016/j.msea.2010.01.037 ↗
18. L. Chen, H.S. Kim, S.K. Kim, and B.C. De Cooman: ISIJ Int., 2007, vol. 47, pp. 1804–12.10.2355/isijinternational.47.1804 ↗
19. Y.N. Datsur and W.C. Leslie: Metall. Trans. A, 1981, vol. 12A, pp. 749–59.
20. D. Cornette, P. Cugy, A. Hildebrand, and M. Bouzekri: SAE Paper 2005-01-1327, SAE International, Warrendale, PA, 2005.
21. K. Chung, K. Ahn, D.H. Yoo, K.H. Chung, and M.H. Seo: Int. J. Plast., 2011, vol. 27, pp. 52–81.10.1016/j.ijplas.2010.03.006 ↗
22. C. Orosz, B. Palotás, and J. Dobránsky: Mater. Sci. Forum, 2007, vols. 537–538, pp. 431–38.10.4028/www.scientific.net/MSF.537-538.431 ↗
23. W. Tong, H. Tao, X. Jiang, N. Zhang, M. Marya, L.G. Hector, Jr., and X.Q. Gayden: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2651–69.10.1007/s11661-005-0263-4 ↗
24. L. Mujica, S. Weber, H. Pinto, C. Thomy, and F. Vollersten: Mater. Sci. Eng. A, 2010, vol. 527A, pp. 2071–78.10.1016/j.msea.2009.11.050 ↗
25. P. Yang, Q. Xie, L. Meng, H. Ding, and Z. Tang: Scripta Mater., 2006, vol. 55, pp. 629–31.10.1016/j.scriptamat.2006.06.004 ↗
26. L. Meng, P. Yang, Q. Xie, H. Ding, and Z. Tang: Scripta Mater., 2007, vol. 56, pp. 931–34.10.1016/j.scriptamat.2007.02.028 ↗
27. S. Vercammen, B. Blanpain, B.C. De Cooman, and P. Wollants: Acta Mater., 2004, vol. 52, pp. 2005–12.10.1016/j.actamat.2003.12.040 ↗
28. A.T. English and G.Y. Chin: Acta Metall., 1965, vol. 13, pp. 1013–16.10.1016/0001-6160(65)90010-6 ↗
29. D. Barbier, N. Gey, S. Allain, N. Bozzolo, and M. Humbert: Mater. Sci. Eng. A, 2009, vol. 500A, pp. 196–206.10.1016/j.msea.2008.09.031 ↗
30. I. Gutierrez-Urrutia, S. Zaefferer, and D. Raabe: Mater. Sci. Eng. A, 2010, vol. 527A, pp. 3552–60.10.1016/j.msea.2010.02.041 ↗
31. H. Idrissi, K. Renard, L. Ryelandt, D. Schryvers, and P.J. Jacques: Acta Mater., 2010, vol. 58, pp. 2464–76.10.1016/j.actamat.2009.12.032 ↗
32. J.B. Cohen and J. Weertman: Acta Metall., 1963, vol. 11, pp. 996–98.10.1016/0001-6160(63)90074-9 ↗
33. S. Miura, J. Takamura, and N. Narita: Trans. Jpn. Inst. Met., 1968, vol. 9, pp. 555–62.
34. J. Wang, N. Li, O. Anderoglu, X. Zhang, A. Misra, J.Y. Huang, and J.P. Hirth: Acta Mater., 2010, vol. 58, pp. 2262–70.10.1016/j.actamat.2009.12.013 ↗
35. S.K. Kim, J. Choi, S.C. Kang, I.R. Shon, and K.G. Chin: The Development of TWIP Steel for Automotive Application, POSCO TECHNICAL REPORT, 2006, vol. 10 (1), pp. 106–14. http://www.posco.com/homepage/docs/eng/dn/company/product/3.Development%20of%20TWIP%20Steel%20for%20Automotive%20Application.pdf.
36. S.S. Hecker: Mech. Eng. Quart., 1974, vol. 14, pp. 30–36.
37. S.S. Hecker: Sheet Metal Industries, 1975, vol. 58, pp. 671–76.
38. S.P. Keeler: Sheet Metal Industries, 1965, vol. 42, pp. 683–91.
39. http://www.gom.com/metrologysystems/system-overview.
40. http://www.panalytical.com/index.cfm?pid=321.
41. P. Van Houtte: Manual of MTM-FHM, ed., MTM-KU, Leuven, Belgium, 1995.
42. H.J. Bunge: Texture Analysis in Materials Science: Mathematcial Methods, Butterworth, London, UK, 1982.
43. S.K. Yerra, B. Verlinden, and P. Van Houtte: Mater. Sci. Forum, 2005, vols. 495–497, pp. 913–18.10.4028/www.scientific.net/MSF.495-497.913 ↗
44. J. Hirsch and K. Lücke: Acta Metall., 1998, vol. 36, pp. 2863–82.10.1016/0001-6160(88)90172-1 ↗
45. G.I. Taylor: J. Inst. Met., 1938, vol. 62, pp. 307–24.
46. E. Aernoudt, P. Van Houtte, and T. Leffers: Plastic Deformation and Fracture of Materials (vol. 6 of Materials Science and Technology: A Comprehensive Treatment, ed. by R.W. Cahn, P. Haasen, and E.J. Kramer), ed. by H. Mughrabi. Weinheim, Federal Republic of Germany: VCH, 1993, pp. 89–136.
47. L.S. Toth and P. Van Houte: Textures Microstruct., 1992, vol. 19, pp. 229–44.10.1155/TSM.19.229 ↗
48. D.G. Brandon: Acta Metall., 1966, vol. 14, pp. 1479–84.10.1016/0001-6160(66)90168-4 ↗
49. M. Kronberg and F. Wilson: Trans. AIME, 1949, vol. 185, pp. 501–14.
50. B.L. Henrie, T.A. Mason, and B.L. Hansen: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3745–41.10.1007/s11661-004-0280-8 ↗
51. S.K Mishra, K. Narasimhan, and I. Samajdar: Mater. Sci. Technol., 2007, vol. 23, pp. 1118–26.10.1179/174328407X213242 ↗
52. J.A. Venables: J. Phys. Chem. Solids, 1964, vol. 25, pp. 693–700.10.1016/0022-3697(64)90178-7 ↗
53. M.A. Meyers, D.J. Benson, O. Vöhringer, B.K Kad, Q. Xue, and H.H. Fu: Mater. Sci. Eng. A, 2002, vol. 322, pp. 194–216.10.1016/S0921-5093(01)01131-5 ↗
54. E.B. Tadmor and N. Bernstein: J. Mech. Phys. Solids, 2004, vol. 52, pp. 2507–19.10.1016/j.jmps.2004.05.002 ↗
55. B. Verlinden, J. Driver, I. Samajdar, and R.D. Doherty: Thermo-Mechanical Processing of Metallic Materials, Pergamon Materials Series – series, R.W. Cahn, ed., Elsevier, Amsterdam, The Netherlands, 2007.
56. T.S. Byun, N. Hashimoto, and K. Farrell: J. Nucl. Mater., 2006, vol. 351, pp. 303–15.10.1016/j.jnucmat.2006.02.033 ↗
57. N. Hashimoto, S.J. Zinkle, A.F. Rowcliffe, J.P. Robertson, and S. Jituskawa: J. Nucl. Mater., 2000, vols. 283–287, pp. 528–34.10.1016/S0022-3115(00)00087-8 ↗