Conventional and Multiscale Modeling of Microstructure Evolution During Laminar Cooling of DP Steel Strips
Source abstract
Abstract
Abstract Physical and numerical simulations of the hot rolling and laminar cooling of DP steel strips are presented in the paper. The objectives of the paper were twofold. Physical simulations of hot plastic deformation were used to identify and validate numerical models. Validated models were applied to simulate the manufacturing of DP steel strips. Conventional flow stress model and microstructure evolution model were used in the hot deformation part. The approach to the complex systems analysis based on global thermodynamic characterization and detailed microstructure characterization was applied to determine equilibrium state at various temperatures. Finally, two numerical models were used to simulate kinetics of austenite decomposition at varying temperatures: the first, conventional model based on the Avrami equation, and the second, the discrete Cellular Automata approach. Plastometric tests and stress relaxation tests were used for identification of the hot rolling model for the DP steel. Dilatometric tests were performed to identify the phase transformation models. Verification confirmed good accuracy of all models. Validated models were applied to simulate the manufacturing of DP steel strips. Influence of technological parameters (e.g., strip thickness and velocity, active sections in the laminar cooling, and water flux in the sections) on the DP microstructure was analyzed. The cooling schedules, which give required microstructures were proposed. The numerical tool, which simulates manufacturing chain for DP steel strips is the main output of the paper.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. H. Hofmann, D. Mattissen, T.W. Schaumann, Steel Research International, Vol. 80, 2009, pp. 22-28.
2. R. Kuziak, R. Kawalla, S. Waengler, Archives of Civil and Mechanical Engineering, Vol. 8, 2008, pp. 103-117.10.1016/S1644-9665(12)60197-6 ↗
3. Thomser C., Uthaisangsuk V., Bleck W., Steel Research International, Vol. 80, 2009, pp. 582-587.
4. Pietrzyk M., Kuziak R., Radwański K., Szeliga D., Steel Research International, Vol. 85, 2014, pp. 99–111.10.1002/srin.201200318 ↗
5. M. Avrami, Journal of Chemical Physics, 1939, Vol. 7, pp. 1103–1112.10.1063/1.1750380 ↗
6. M. Pietrzyk, Journal of Materials Processing Technology, Vol. 106, 2000, pp. 223-229.10.1016/S0924-0136(00)00618-X ↗
7. A. Hansel, T. Spittel: Kraft- und Arbeitsbedarf Bildsamer Formgebungs-verfahren, VEB Deutscher Verlag fur Grundstoffindustrie, Leipzig, 1979.
8. P.D. Hodgson, K.M. Browne, D.C. Collinson, T.T. Pham, and R.K. Gibbs: Proc. Quenching and Carburizing, Melbourne, 1991, pp. 139–59.
9. C.M. Sellars: in Hot Working and Forming Processes, C.M. Sellars and G.J. Davies, eds., The Metals Society, London, 1979, pp. 3–15.
10. C. Bos, M.G. Mecozzi, J. Sietsma, Computational Materials Science, 2010, Vol. 48, pp. 692-699.10.1016/j.commatsci.2010.03.010 ↗
11. A. Murugaiyan, A. Saha Podder, A. Pandit, S. Chandra, D. Bhattacharjee, R.K. Ray, Phase transformations in two C-Mn-Si_Cr dual phase steels, ISIJ International, 46, 2006, 1489-1494.10.2355/isijinternational.46.1489 ↗
12. B. Donnay, J.C. Herman, V. Leroy, U. Lotter, R. Grossterlinden, and J.H. Pircher: in Proc. Conf. Modelling of Metal Rolling Processes, J.H. Beynon, P. Ingham, H. Teichert, and K. Waterson, eds., London, 1996, pp. 23–35.
13. R. Kuziak and M. Pietrzyk: Steel Res. Int., 2011, pp. 756–61.
14. Koistinen D.P., Marburger R.E., Acta Metallurgica, 7, 1959, 59-69.10.1016/0001-6160(59)90170-1 ↗
15. D. Li, N. Xiao, Y. Lan, C. Zheng, Y. Li, Acta Materialia, 2007, Vol. 55, pp. 6234-6249.10.1016/j.actamat.2007.07.041 ↗
16. Y.J. Lan, D.Z. Li, Y.Y. Li, Acta Materialia, 2004, Vol. 52, pp. 1721-1729.10.1016/j.actamat.2003.12.045 ↗
17. M. Pietrzyk, Ł. Madej, Ł. Rauch, R. Gołąb, Archives of Civil and Mechanical Engineering, Vol. 10, 2010, pp. 57-67.10.1016/S1644-9665(12)60031-4 ↗
18. C. Halder, L. Madej, M. Pietrzyk, Archives of Civil and Mechanical Engineering, Vol. 14, 2014, pp. 96-103.10.1016/j.acme.2013.07.001 ↗
19. M. Kleiber, H. Antunez, T.D. Hien, P. Kowalczyk, Parameter Sensitivity in Nonlinear Mechanics, Wiley, New York, 1997.
20. D. Szeliga: Identification Problems in Metal Forming. A Comprehensive Study, Publisher AGH, No. 291, Kraków, 2013.
21. D. Szeliga, J. Gawąd, M. Pietrzyk, Computer Methods in Applied Mechanics and Engineering., 2006, Vol. 195, pp. 6778-6798.10.1016/j.cma.2005.03.015 ↗
22. M. Militzer, E.B. Hawbolt, T.R. Meadowcroft, Metallurgical and Materials Transactions A, Vol. 31, 2000, pp. 1247 -1259.10.1007/s11661-000-0120-4 ↗
23. L.P. Karjalainen, J. Perttu, ISIJ International, 1996, Vol. 36, pp. 729-736.10.2355/isijinternational.36.729 ↗
24. M. Pietrzyk and R. Kuziak: in Microstructure Evolution in Metal Forming Processes, J. Lin, D. Balint, and M. Pietrzyk, eds., Woodhead Publishing, Oxford, 2012, pp. 145–79.10.1533/9780857096340.2.145 ↗
25. D. Szeliga, J. Kusiak, and L. Rauch: Steel Research International, Spec. Issue Conf. Metal Forming, 2012, pp. 1275–78.
26. D. Szeliga, L Sztangret, J. Kusiak, and M. Pietrzyk: Proc. 11th Conf. NUMIFORM, AIP Publishing, Shenyang, 2013, pp. 718–724.10.1063/1.4806901 ↗