journal article·2013-05

Microstructure and Mechanical Property Change During FSW and GTAW of Al6061 Alloy

V. Fahimpour, S. K. Sadrnezhaad, F. Karimzadeh

Publisher page

Abstract

The variation of morphology and mechanical properties of Al6061 automotive aluminum alloy due to friction stir welding (FSW) and gas tungsten arc welding (GTAW) was investigated by optical metallography, scanning electron microscopy, microhardness measurement, X-ray diffraction, tensile testing, and fractography. The center-line dendrite emergence and microhardness reduction in the heat-affected zone were observed in the GTAW process. Although similar microhardness reduction with respect to the base metal was observed in the FSW samples, higher HVs were obtained for the FSW rather than the GTAW process at almost all heat-affected locations. Ultimate tensile strengths of the FSW and the GTAW samples in the transverse direction were ~0.57 and ~0.35 of the base metal, respectively. Post-weld aging improved the strength, but reduced the ductility of the welding.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Jariyaboon M, Davenport AJ, Ambat R, Connolly BJ, Williams SW, Price DA: Corrosion Science 2007; 49: 877–909.10.1016/j.corsci.2006.05.038 ↗
2. Mathers G (2002) The welding of aluminum and its alloys. Woodhead Publishing Ltd and CRC Press LLC; Boca Raton, Washington DC.10.1533/9781855737631 ↗
3. Lakshminarayanan AK, Balasubramanian V, Elangovan K: Int J Adv Manuf Technol 2009; 40: 286–296.10.1007/s00170-007-1325-0 ↗
4. Nikseresht Z, Karimzadeh F, Golozar MA, Heidarbeigy M: Mater. Des., 2010; 31: 2643–2648.10.1016/j.matdes.2009.12.001 ↗
5. Shakoor A and Zhenggan Z: Journal of Materials Processing Technology 2011; 211: 1736–1741.10.1016/j.jmatprotec.2011.05.011 ↗
6. Zhao J, Jiang F, Jian H, Wen K, Jiang L, Chen X: Mater. Des., 2010; 31: 306–311.10.1016/j.matdes.2009.06.012 ↗
7. Kumar A and Sundarrajan S: Mater. Des., 2009; 30: 1288–1297.10.1016/j.matdes.2008.06.055 ↗
8. Mutombo K and Toit MD: Int. J. Fatigue, 2011; 33: 1539–1547.10.1016/j.ijfatigue.2011.06.012 ↗
9. Heidarzadeh A, Khodaverdizadeh H, Mahmoudi A, and Nazari E: Mater. Des., 2012; 37: 166–173.10.1016/j.matdes.2011.12.022 ↗
10. Mishra RS and Ma ZY: Mater. Sci. Eng. R 2005; 50 1–78.10.1016/j.mser.2005.07.001 ↗
11. Gallais C, Denquin A, Bréchet Y, and Lapasset G: Mater. Sci. Eng. A 2008; 496 77–89.10.1016/j.msea.2008.06.033 ↗
12. Munoz AC, Ruckert G, Huneau B, Sauvage X, and Marya S: J. Mater. Process. Technol., 2008; 197: 337-343.10.1016/j.jmatprotec.2007.06.035 ↗
13. Simar A, Brechet Y, de Meester B, Denquin A, Gallais C, and Pardoen T: Prog. Mater. Sci., 2012; 57: 95–183.10.1016/j.pmatsci.2011.05.003 ↗
14. Fahimpour V, Sadrnezhaad SK, and Karimzadeh F: Mater. Des., 2012; 39: 329-333.10.1016/j.matdes.2012.02.043 ↗
15. ASM Handbook (2005) Properties and Selection: Irons, Steels, and High Performance Alloys, Section: carbon and low alloy steels, Vol. 1. ASM International, Materials Park, OH.
16. ASM Handbook (1998). Heat Treating Section: Introduction to Heat Treating of Tool Steels, Vol. 4. ASM International, Materials Park, OH.
17. ASM Handbook (1998) Heat treating Section: heat treating of aluminum alloys, Vol. 4. ASM International, Materials Park, OH.
18. ASTM Standard E0008M-00b, vol. 03.01: Metals Test Methods and Analytical Procedures, ASTM International, Materials Park, OH, 2005.
19. ASM Handbook: Metallography and Microstructures, vol. 9, ASM International, Materials Park, OH, 2004.
20. Norman AF, Drazhner V, and Prangnell PB: Mater. Sci. Eng. A 1999; 259: 53–64.10.1016/S0921-5093(98)00873-9 ↗
21. Li Y, Murr LE, and McClure JC: Mater. Sci. Eng. A 1999; 271: 213-223.10.1016/S0921-5093(99)00204-X ↗
22. Kumar TS, Balasubramanian V, and Sanavullah MY: Mater. Des., 2007; 28: 2080–2092.10.1016/j.matdes.2006.05.027 ↗
23. Ozturk F, Sisman A, Toros S, Kilic S, and Picu RC.: Mater. Des., 2010; 31: 972–975.10.1016/j.matdes.2009.08.017 ↗