journal article·2013-03

Evolution of Microstructures During Austempering of Ductile Irons Alloyed with Manganese and Copper

Ranjan Kumar Dasgupta, Dipak Kumar Mondal, Ajit Kumar Chakrabarti

Publisher page

Abstract

The influences of relatively high manganese (0.45 through 1.0 wt pct) and copper (0.56 through 1.13 wt pct) contents on microstructure development and phase transformation in three austempered ductile irons have been studied. The experimental ductile irons alloyed with copper and manganese are found to be practically free from intercellular manganese segregation. This suggests that the positive segregation of manganese is largely neutralized by the negative segregation of copper when these alloying elements are added in appropriate proportions. The drop in unreacted austenite volume (UAV) with increasing austempering temperature and time is quite significant in irons alloyed with copper and manganese. The ausferrite morphology also undergoes a transition from lenticular to feathery appearance of increasing coarseness with the increasing austempering temperature and time. SEM micrographs of the austempered samples from the base alloy containing manganese only, as well as copper plus manganese-alloyed irons, clearly reveal the presence of some martensite along with retained austenite and ferrite. X-ray diffraction analysis also confirms the presence of these phases. SEM examination further reveals the presence of twinned martensite in the copper plus manganese-alloyed samples. The possibility of strain-induced transformation of austenite to martensite during austempering heat treatment is suggested.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. K. L. Hayrynen: Mod. Casting, 1995, vol. 8, pp. 35–38.
2. T.N. Rouns and K.B. Roundman: AFS Res., 1987, pp. 851–74.
3. N. Darwish and R. Elliot: J. Mater. Sci. & Tech., 1993, vol. 9, pp. 572–85.10.1179/026708393790172286 ↗
4. S. Yazdani and R. Elliot: J. Mater. Sci. & Tech., 1999, vol. 5, pp. 531–40.10.1179/026708399101506247 ↗
5. E. Dorazil: Foundry M & T, 1986, vol. 13, pp. 36–45.
6. D. Krishnaraj, H.N.L. Narrasimhan, and S. Seshan: AFS Trans., 1992, vol. 100, pp. 105–12.
7. A. Trudel and M. Gague: Can. Metall. Q., 1997, vol. 36, Iss. 5, pp. 289–98.10.1016/S0008-4433(97)00028-1 ↗
8. J.R. Keough and K.L. Hayryhen: Automotive Applications of Austempered Ductile Iron (ADI): A Critical Review, SAE, USA, 2000, pp. 1–12.10.4271/2000-01-0764 ↗
9. M.J. Perez, M.M. Cisneros, and H.F. Lopez: Wear, 2006, vol. 260, Iss. 7, pp. 879–85.10.1016/j.wear.2005.04.001 ↗
10. R. Elliot: Cast Iron Technology, Butterworth & Co P Ltd., London, 1996, pp. 385–86.
11. E. Dorazil: High Strength Austempered Ductile Cast Iron, Ellis Horwood, New York, 1991.
12. O. Eric, L. Sidjanin, Z. Miskovic, S. Zec and M. T. Jovanovic: Mater. Let., 2004, vol. 58, pp. 2707–11.10.1016/j.matlet.2004.02.041 ↗
13. U. Batra., S. Roy, and S.R. Prabhakar: J. Mater. Eng. Perf., 2003, vol. 12, Iss. 5, pp. 597–601.10.1361/105994903100277120 ↗
14. U. Batra, S. Roy, and S.R. Prabhakar: J. Mater. Eng. Perf., 2004, vol. 13, Iss. 1, pp. 64–68.10.1361/10599490417515 ↗
15. R.H. Juneja, A.K. Chakrabarti, A.K. Basak, and A. Bhattacharya: Foundry Manag. Tech., 1989, vol. 117, Iss. 2, pp. 64–67.
16. H. Bayati, R. Elliott, and G.W. Lorimer: J. Mater. Sci. Tech., 1995, vol. 11, Iss. 10, pp. 1007–1013.10.1179/026708395790164445 ↗
17. H. Bayati and R. Elliott: J. Mater. Sci. Tech., 1995, vol. 11, pp. 284–93.10.1179/mst.1995.11.3.284 ↗
18. Manganese—Copper alloy ADI gears meshing organizational characteristics of the surface. http://www.hi138.com.
19. H. Bayati and R. Elliott: J. Mater. Sci. & Tech., 1997, vol. 13, pp. 117–24.10.1179/026708397790285728 ↗
20. N.M. Ahmadabadi, E. Niyama, and T. Ohide: AFS Trans., 1994, vol. 120, pp. 269–78.
21. N.M. Ahmadabadi and M.H. Pasha: J. Mater. Sci. Tech., 2001, vol. 17, Iss. 2, pp. 162–67.10.1179/026708301101509953 ↗
22. J.R. Davis: Cast Irons, ASM International Handbook Committee, 1996.
23. R.K. Dasgupta, D.K. Mondal, A.K. Chakrabarti and A.C. Ganguli: J. Mater. Eng. Perf., 2011, vol. 21 (8), pp. 1728–36.10.1007/s11665-011-0058-2 ↗
24. O. Eric, M. Jovanovic, and L. Sidamin: Mater. Design, 2006, vol. 27, Iss. 7, pp. 617–22.10.1016/j.matdes.2004.11.028 ↗
25. P. Hansen: Physical Metallurgy, 3rd ed., Cambridge University Press, Cambridge, 1997, p. 346.
26. W.C. Leslie: The Physical Metallurgy of Steels, Hemisphere Publishing Corp., 1981, p. 116.
27. B.D. Cullity: Elements of X-ray Diffraction, 2nd ed., 1978, Addison, Wesley Pub. Co., Inc, pp. 412–13.