Synthesis of γ-TiAl by Reactive Spark Plasma Sintering of Cryomilled Ti and Al Powder Blend, Part I: Influence of Processing and Microstructural Evolution
Source abstract
Abstract
To provide insight into the influence of an electric field on the kinetics of diffusion, fully lamellar γ-TiAl was processed by a rapid, two-stage, solid-state reactive sintering via spark plasma sintering (SPS) of a cryomilled Ti, Al powder blend. Cryomilling was implemented in the current study to attain a nanostructured grain size in the Ti and Al powder blend, and thereby provide insight into the influence of grain size on the underlying diffusion kinetics. Following a two-step process involving SPS at 873 K (600 °C) for 15 minutes and 1523 K (1250 °C) for 30 minutes, a fully lamellar TiAl alloy, with submicron lamellar spacing, was successfully obtained. Microstructural refinement in the Ti and Al powders during cryomilling led to an increase in solid-state diffusion, and the underlying mechanisms are discussed in detail.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Z.A. Munir, U. Anselmi-Tamburini and M. Ohyanagi: J. Mater. Sci., 2006, vol. 41, pp. 763-77.10.1007/s10853-006-6555-2 ↗
2. J. Zhao, J.E. Garay, U. Anselmi-Tamburini, and Z.A. Munir: J. Appl. Phys., 2007, vol. 102, 114902.10.1063/1.2809444 ↗
3. J.E. Garay, U. Anselmi-Tamburini and Z.A. Munir: Acta Mater., 2003, vol. 51, pp. 4487-95.10.1016/S1359-6454(03)00284-2 ↗
4. N. Bertolino, J. Garay, U. Anselmi-Tamburini and Z.A. Munir: Philos. Mag. B, 2002, vol. 82, pp. 969-85.10.1080/13642810110117185 ↗
5. J.R. Friedman, J.E. Garay, U. Anselmi-Tamburini and Z.A. Munir: Intermetallics, 2004, vol. 12, pp. 589-97.10.1016/j.intermet.2004.02.005 ↗
6. T. Kondo, M. Yasuhara, T. Kuramoto, Y. Kodera, M. Ohyanagi and Z.A. Munir: J. Mater. Sci., 2008, vol. 43, pp. 6400-05.10.1007/s10853-008-2758-z ↗
7. U. Anselmi-Tamburini, J.E. Garay and Z.A. Munir: Mater. Mater. Sci. Eng. A, 2005, vol. 407, pp. 24-30.10.1016/j.msea.2005.06.066 ↗
8. T. Kondo, T. Kuramoto, Y. Kodera, M. Ohyanagi and Z.A. Munir: J. Ceram. Soc. Jpn., 2008, vol. 116, pp. 1187-92.10.2109/jcersj2.116.1187 ↗
9. H. Clemens and H. Kestler: Adv Eng Mater, 2000, vol. 2, pp. 551-70.10.1002/1527-2648(200009)2:9<551::AID-ADEM551>3.0.CO;2-U ↗
10. K. Gebauer: Intermetallics, 2006, vol. 14, pp. 355-60.10.1016/j.intermet.2005.08.009 ↗
11. K. Liu, Y.C. Ma, M. Gao, G.B. Rao, Y. Y. Li, K. Wei, X.H. Wu and M.H. Loretto: Intermetallics, 2005, vol. 13, pp. 925-28.10.1016/j.intermet.2004.12.004 ↗
12. T. Tetsui: Mater. Mater. Sci. Eng. A, 2002, vol. 329, pp. 582-88.10.1016/S0921-5093(01)01584-2 ↗
13. G.P. Chaudhari and V.L. Acoff: Intermetallics 2010, vol. 18, pp. 472-78.10.1016/j.intermet.2009.09.008 ↗
14. Y.Y. Chen, H.B. Yu, D.L. Zhang and L.H. Chai: Mater. Mater. Sci. Eng. A, 2009, vol. 525, pp. 166-73.10.1016/j.msea.2009.06.056 ↗
15. M.A. Lagos and I. Agote: Intermetallics, 2013, vol. 36, pp. 51-56.10.1016/j.intermet.2013.01.006 ↗
16. O. Ertorer, T. Topping, Y. Li, W. Moss and E.J. Lavernia: Scripta Mater., 2009, vol. 60, pp. 586-89.10.1016/j.scriptamat.2008.12.017 ↗
17. D.B. Witkin and E.J. Lavernia: Prog Mater Sci, 2006, vol. 51, pp. 1-60.10.1016/j.pmatsci.2005.04.004 ↗
18. N. Bertolino, M. Monagheddu, A. Tacca, P. Giuliani, C. Zanotti and U.A. Tamburini: Intermetallics, 2003, vol. 11, pp. 41-49.10.1016/S0966-9795(02)00128-0 ↗
19. G.K. Williamson and W.H. Hall: Acta Metall., 1953, vol. 1, pp. 22-31.10.1016/0001-6160(53)90006-6 ↗
20. L. Balogh, T. Ungar, Y. Zhao, Y.T. Zhu, Z. Horita, C. Xu and T.G. Langdon: Acta Mater., 2008, vol. 56, pp. 809-20.10.1016/j.actamat.2007.10.053 ↗
21. J. Schuster and M. Palm: J. Phase Equilib. Diffus., 2006, vol. 27, pp. 255-77.10.1361/154770306X109809 ↗
22. L. Xu, Y.Y. Cui, Y.L. Hao and R. Yang: Mater. Mater. Sci. Eng. A, 2006, vol. 435, pp. 638-47.10.1016/j.msea.2006.07.077 ↗
23. W. Yao, A. P. Wu, G.S. Zou and H.L. Ren: Mater. Mater. Sci. Eng. A, 2008, vol. 480, pp. 456-63.10.1016/j.msea.2007.07.027 ↗
24. K. Kulkarni, Y. Sun, A.K. Sachdev and E.J. Lavernia: Scripta Mater., 2013, vol. 68, pp. 841-44.10.1016/j.scriptamat.2013.02.004 ↗
25. H.M. Wen, T.D. Topping, D. Isheim, D.N. Seidman and E.J. Lavernia: Acta Mater., 2013, vol. 61, pp. 2769-82.10.1016/j.actamat.2012.09.036 ↗
26. E.J. Lavernia, B.Q. Han and J.M. Schoenung: Mater. Mater. Sci. Eng. A, 2008, vol. 493, pp. 207-14.10.1016/j.msea.2007.06.099 ↗
27. J. Benjamin and T. Volin: Metall. Trans. B, 1974, vol. 5B, pp. 1929-34.10.1007/BF02644161 ↗
28. F.S. Sun, P. Rojas, A. Zuniga and E.J. Lavernia: Mater. Mater. Sci. Eng. A, 2006, vol. 430, pp. 90-97.10.1016/j.msea.2006.05.136 ↗
29. C. Suryanarayana: Prog Mater Sci, 2001, vol. 46, pp. 1-184.10.1016/S0079-6425(99)00010-9 ↗
30. F. Zhou, D. Witkin, S.R. Nutt and E.J. Lavernia: Mater. Mater. Sci. Eng. A, 2004, vol. 375, pp. 917-21.10.1016/j.msea.2003.10.235 ↗
31. O. Ertorer, A. Zuniga, T. Topping, W. Moss and E.J. Lavernia: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 91-103.10.1007/s11661-008-9688-x ↗
32. C.C. Koch: Nanostruct Mater, 1993, vol. 2, pp. 109-29.10.1016/0965-9773(93)90016-5 ↗
33. Y.J. Lin, B. Yao, Z.H. Zhang, Y. Li, Y. Sohn, J.M. Schoenung and E.J. Lavernia: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 4247-57.10.1007/s11661-012-1223-4 ↗
34. D.R. Lide: Handbook of Chemistry and Physics, 84th ed., CRC Press, Boca Raton, 2003.
35. G. Welsch, R. Boyer, and E.W. Collings: Materials Properties Handbook: Titanium Alloys, ASM International, Materials Park, 1994.
36. C.C. Koch: Nanostruct. Mater., 1997, vol. 9, pp. 13-22.10.1016/S0965-9773(97)00014-7 ↗
37. T. Voisin, L. Durand, N. Karnatak, S. Le Gallet, M. Thomas, Y. Le Berre, J.F. Castagne and A. Couret: J. Mater. Process. Technol., 2013, vol. 213, pp. 269-78.10.1016/j.jmatprotec.2012.09.023 ↗
38. Y. Sun, K. Kulkarni, A.K. Sachdev, and E.J. Lavernia: Metall. Mater. Trans. A, DOI:10.1007/s11661-014-2216-2.10.1007/s11661-014-2216-2 ↗
39. J. Safarian and T.A. Engh: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 747-53.10.1007/s11661-012-1464-2 ↗
40. J.G. Luo and V.L. Acoff: Mater. Mater. Sci. Eng. A, 2004, vol. 379, pp. 164-72.10.1016/j.msea.2004.01.021 ↗
41. R. Orru, G. Cao and Z.A. Munir: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1101-08.10.1007/s11661-999-0162-1 ↗
42. Y. Mishin and C. Herzig: Mater. Mater. Sci. Eng. A, 1999, vol. 260, pp. 55-71.10.1016/S0921-5093(98)00978-2 ↗
43. L. C. Luther: J. Chem. Phys., 1965, vol. 43, pp. 2213-18.10.1063/1.1697112 ↗
44. E.W. Elcock and C.W. McCombie: Phys. Rev., 1958, vol. 109, pp. 605-06.10.1103/PhysRev.109.605 ↗