Comparison of Microstructure Refinement in Wire-Arc Additively Manufactured Ti–6Al–2Sn–4Zr–2Mo–0.1Si and Ti–6Al–4V Built With Inter-Pass Deformation
Source abstract
Abstract
Abstract The titanium alloy Ti–6Al–2Sn–4Zr–2Mo–0.1Si (Ti6242) has been deposited for the first time by a directed energy deposition process using a wire and arc system—i.e., wire-arc additive manufacturing (WAAM)—with and without inter-pass machine hammer peening, and its microstructure investigated and compared to the more commonly used alloy Ti–6Al–4V (Ti64). The application of inter-pass machine hammer peening—where each added layer was deformed before deposition—successfully refined the strongly textured, coarse, columnar β-grain structure that is commonly seen in α + β titanium alloys, producing a finer equiaxed grain structure with a near-random α texture. The average grain diameter and texture strength decreased with the peening pitch. When Ti6242 was deposited under identical conditions to Ti64, by switching the alloy feed wire in-situ, the refined β-grain size decreased across the alloy-to-alloy transition reaching on average 25 pct less in Ti6242 than in Ti64. A similar 25 pct scale reduction was also found in the Ti6242 α-lath transformation microstructure. This comparatively greater microstructure refinement in Ti6242 was attributed to the dissimilar alloying elements present in the two materials; specifically, molybdenum, which has a lower diffusivity than vanadium and led to slower β-grain growth during reheating as well as a finer transformation microstructure.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. S.W. Williams, F. Martina, A.C. Addison, J. Ding, G. Pardal, and P.A. Colegrove: Mater. Sci. Technol., 2016, vol. 32(7), pp. 641–47. https://doi.org/10.1179/1743284715Y.0000000073.10.1179/1743284715Y.0000000073 ↗
2. T. DebRoy, et al.: Prog. Mater. Sci., 2018, vol. 92, pp. 112–224. https://doi.org/10.1016/j.pmatsci.2017.10.001.10.1016/j.pmatsci.2017.10.001 ↗
3. J. Allen: An investigation into the comparative costs of additive manufacture vs. machine from solid for aero engine parts, Proceedings of the Meeting RTO-MP-AVT-139, pp. 17-1-17–10, 2006. https://doi.org/10.14339/RTO-MP-AVT-139-17.10.14339/RTO-MP-AVT-139-17 ↗
4. C. Körner: Int. Mater. Rev., 2016, vol. 61(5), pp. 361–77. https://doi.org/10.1080/09506608.2016.1176289.10.1080/09506608.2016.1176289 ↗
5. A. Ho, H. Zhao, J.W. Fellowes, F. Martina, A.E. Davis, and P.B. Prangnell: Acta Mater., 2019, vol. 166, pp. 306–23. https://doi.org/10.1016/j.actamat.2018.12.038.10.1016/j.actamat.2018.12.038 ↗
6. D. Ding, Z. Pan, D. Cuiuri, and H. Li: Int. J. Adv. Manuf. Technol., 2015, vol. 81(1–4), pp. 465–81. https://doi.org/10.1007/s00170-015-7077-3.10.1007/s00170-015-7077-3 ↗
7. J. Gockel, J. Beuth, and K.M. Taminger: Addit. Manuf., 2014, vol. 1, pp. 119–26. https://doi.org/10.1016/j.addma.2014.09.004.10.1016/j.addma.2014.09.004 ↗
8. K.M. Taminger and R.A. Hafley, Electron beam freeform fabrication for cost effective near-net shape manufacturing, Specialists' Meeting on Cost Effective Manufacture via Net-Shape Processing (NATO/RTO AVT-139), pp. 16:1–10, 2006. http://ntrs.nasa.gov/search.jsp?R=20060009152%0Ahttps://www.cso.nato.int/pubs/rdp.asp?RDP=RTO-MP-AVT-139.
9. F. Martina, P.A. Colegrove, S.W. Williams, and J. Meyer: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2015, vol. 46(12), pp. 6103–18. https://doi.org/10.1007/s11661-015-3172-1.10.1007/s11661-015-3172-1 ↗
10. F. Martina, J. Mehnen, S.W. Williams, P.A. Colegrove, and F. Wang: J. Mater. Process. Technol., 2012, vol. 212(6), pp. 1377–86. https://doi.org/10.1016/j.jmatprotec.2012.02.002.10.1016/j.jmatprotec.2012.02.002 ↗
11. D. Kovalchuk and O. Ivasishin: Profile Electron Beam 3D Metal Printing, Elsevier Inc., Amsterdam, 2019.10.1016/B978-0-12-814062-8.00012-1 ↗
12. A.E. Davis, J.R. Kennedy, D. Strong, D. Kovalchuk, S. Porter, and P.B. Prangnell: Materialia, 2021, vol. 20(August), p. 101202. https://doi.org/10.1016/j.mtla.2021.101202.10.1016/j.mtla.2021.101202 ↗
13. F. Wang, S.W. Williams, P.A. Colegrove, and A.A. Antonysamy: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2013, vol. 44(2), pp. 968–77. https://doi.org/10.1007/s11661-012-1444-6.10.1007/s11661-012-1444-6 ↗
14. P.A. Kobryn and S.L. Semiatin: J. Mater. Process. Technol., 2003, vol. 135(2–3 SPEC), pp. 330–39. https://doi.org/10.1016/S0924-0136(02)00865-8.10.1016/S0924-0136(02)00865-8 ↗
15. S.M. Kelly and S.L. Kampe: Metall. Mater. Trans. A, 2004, vol. 35A(6), pp. 1861–67. https://doi.org/10.1007/s11661-004-0095-7.10.1007/s11661-004-0095-7 ↗
16. S.M. Kelly and S.L. Kampe: Metall. Mater. Trans. A, 2004, vol. 35A(6), pp. 1869–79. https://doi.org/10.1007/s11661-004-0095-7.10.1007/s11661-004-0095-7 ↗
17. F. Martina, S.W. Williams, and P.A. Colegrove: SFF Symp., 2013, https://doi.org/10.1007/s13398-014-0173-7.2.10.1007/s13398-014-0173-7.2 ↗
18. C.J. Todaro, et al.: Nat. Commun., 2020, vol. 11(1), p. 142. https://doi.org/10.1038/s41467-019-13874-z.10.1038/s41467-019-13874-z ↗
19. L. Neto, S.W. Williams, J. Ding, J.R. Hönnige, and F. Martina: Adv. Surf. Enhanc. 1st Int. Conf. Adv. Surf. Enhanc., 2020, vol. 1, pp. 121–32. https://doi.org/10.1007/978-981-15-0054-1.10.1007/978-981-15-0054-1 ↗
20. K. Zhang, et al.: Mater. Des., 2019, https://doi.org/10.1016/j.matdes.2019.108191.10.1016/j.matdes.2019.108191 ↗
21. M.J. Bermingham, D.H. StJohn, J. Krynen, S. Tedman-Jones, and M.S. Dargusch: Acta Mater., 2019, vol. 168, pp. 261–74. https://doi.org/10.1016/j.actamat.2019.02.020.10.1016/j.actamat.2019.02.020 ↗
22. J. Wang, et al.: J. Alloys Compd., 2018, vol. 768, pp. 97–113. https://doi.org/10.1016/j.jallcom.2018.07.235.10.1016/j.jallcom.2018.07.235 ↗
23. J. Donoghue, A.A. Antonysamy, F. Martina, P.A. Colegrove, S.W. Williams, and P.B. Prangnell: Mater. Charact., 2016, vol. 114, pp. 103–14. https://doi.org/10.1016/j.matchar.2016.02.001.10.1016/j.matchar.2016.02.001 ↗
24. X. Zhang, F. Martina, J. Ding, X. Wang, and S.W. Williams: Fatigue Fract. Eng. Mater. Struct., 2017, vol. 40(5), pp. 790–803. https://doi.org/10.1111/ffe.12547.10.1111/ffe.12547 ↗
25. A.K. Syed, et al.: Mater. Sci. Eng. A, 2021, vol. 814(January), p. 141194. https://doi.org/10.1016/j.msea.2021.141194.10.1016/j.msea.2021.141194 ↗
26. T. Lyman, Atlas of Microstructures of Industrial Alloys. American Society for Metals, 1972.
27. M.J. Bermingham, S.D. McDonald, M.S. Dargusch, and D.H. St. John: J. Mater. Res., 2008, vol. 23(1), pp. 97–104. https://doi.org/10.1557/jmr.2008.0002.10.1557/jmr.2008.0002 ↗
28. D.A. Porter and K.E. Easterling, Phase Transform. Met. Alloys, vol. 3. 1992.
29. J. Donoghue, et al.: Acta Mater., 2019, vol. 186, pp. 229–41. https://doi.org/10.1016/j.actamat.2020.01.009.10.1016/j.actamat.2020.01.009 ↗
30. J.R. Hönnige, et al.: Metall. Mater. Trans. A, 2020, vol. 51, pp. 3692–3703.10.1007/s11661-020-05781-6 ↗
31. S. Mereddy, M.J. Bermingham, D.H. StJohn, and M.S. Dargusch: J. Alloys Compd., 2017, vol. 695, pp. 2097–2103. https://doi.org/10.1016/j.jallcom.2016.11.049.10.1016/j.jallcom.2016.11.049 ↗
32. J.R. Kennedy, et al.: J. Alloys Compd., 2022, vol. 895, p. 162735. https://doi.org/10.1016/j.jallcom.2021.162735.10.1016/j.jallcom.2021.162735 ↗
33. J.R. Kennedy, A.E. Davis, A.E. Caballero, S.W. Williams, E.J. Pickering, and P.B. Prangnell: Addit. Manuf., 2021, vol. 40(November 2020), p. 101928. https://doi.org/10.1016/j.addma.2021.101928.10.1016/j.addma.2021.101928 ↗
34. J.R. Kennedy, et al.: Mater. Lett. X, 2020, vol. 8, p. 100057. https://doi.org/10.1016/j.mlblux.2020.100057.10.1016/j.mlblux.2020.100057 ↗
35. F. Wang, S.W. Williams, and M. Rush: Int. J. Adv. Manuf. Technol., 2011, vol. 57(5–8), pp. 597–603. https://doi.org/10.1007/s00170-011-3299-1.10.1007/s00170-011-3299-1 ↗
36. G. Lütjering and J.C. Williams: Titanium, Springer, Berlin, 2007.
37. D. Lunt, et al.: Mater. Sci. Eng. A, 2020, vol. 788, p. 139608. https://doi.org/10.1016/j.msea.2020.139608.10.1016/j.msea.2020.139608 ↗
38. J. Zhang, X. Wang, S. Paddea, and X. Zhang: Mater. Des., 2016, vol. 90, pp. 551–61. https://doi.org/10.1016/j.matdes.2015.10.141.10.1016/j.matdes.2015.10.141 ↗
39. C. Hicks, T. Konkova, and P. Blackwell: Mater. Charact., 2020, vol. 170(February), p. 110675. https://doi.org/10.1016/j.matchar.2020.110675.10.1016/j.matchar.2020.110675 ↗
40. I. Burkhardt, R. Visone, S. Riekehr, M.W. Rackel, N. Kashaev, and J. Enz: Procedia CIRP, 2018, vol. 74, pp. 176–79. https://doi.org/10.1016/j.procir.2018.08.088.10.1016/j.procir.2018.08.088 ↗
41. P. Harish, Understanding the Effect of Isothermal Heat Treatments on Microstructure of LMD-w Titanium Alloy (Ti-6242), University West, 2020.
42. ASM International, Materials Properties Handbook: Titanium Alloys. Materials Park, OH, 1994.
43. TIMET, “TIMETAL 6-2-4-2 (datasheet),” 2000. https://www.timet.com/assets/local/documents/datasheets/alphaalloys/6242.pdf. Accessed 09 Oct 2021
44. M.-L. Antti, V.C. Ciprés, J. Mouzon, P. Åkerfeldt, and R. Pederson, Effect of silicon on creep proper es of tanium 6Al-2Sn-4Zr-2Mo alloy, 14th World Conference on Titanium, 2020. https://doi.org/10.1051/matecconf/20203210402110.1051/matecconf/202032104021 ↗
45. J.D. Cotton, et al.: JOM, 2015, vol. 67(6), pp. 1281–1303. https://doi.org/10.1007/s11837-015-1442-4.10.1007/s11837-015-1442-4 ↗
46. G. Lütjering: Mater. Sci. Eng. A, 1998, vol. 243(1–2), pp. 32–45. https://doi.org/10.1016/s0921-5093(97)00778-8.10.1016/s0921-5093(97)00778-8 ↗
47. A.K. Singh and C. Ramachandra: J. Mater. Sci., 1997, vol. 32(1), pp. 229–34. https://doi.org/10.1023/A:1018516324856.10.1023/A:1018516324856 ↗
48. H. Zhao, A. Ho, A.E. Davis, A.A. Antonysamy, and P.B. Prangnell: Mater. Charact., 2019, vol. 147(July), pp. 131–45. https://doi.org/10.1016/j.matchar.2018.10.027.10.1016/j.matchar.2018.10.027 ↗
49. P.S. Davies, An investigation of microstructure and texture evolution in the Near-α titanium alloy Timetal 834, University of Sheffield, 2009.
50. P.S. Davies, B.P. Wynne, W.M. Rainforth, M.J. Thomas, and P.L. Threadgill: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2011, vol. 42(8), pp. 2278–89. https://doi.org/10.1007/s11661-011-0606-2.10.1007/s11661-011-0606-2 ↗
51. J.R. Kennedy, et al.: Mater. Charact., 2021, vol. 182(October), p. 111577. https://doi.org/10.1016/j.matchar.2021.111577.10.1016/j.matchar.2021.111577 ↗
52. H. Okamoto and H. Okamoto: Phase Diagrams for Binary Alloys, ASM international, Materials Park, 2000.
53. M.J. Bermingham, S.D. McDonald, D.H. StJohn, and M.S. Dargusch: J. Alloys Compd., 2009, vol. 481(1–2), pp. 20–23. https://doi.org/10.1016/j.jallcom.2009.03.016.10.1016/j.jallcom.2009.03.016 ↗
54. A.E. Davis, et al.: Mater. Sci. Eng. A, 2019, https://doi.org/10.1016/j.msea.2019.138289.10.1016/j.msea.2019.138289 ↗
55. T. Ahmed and H.J. Rack: Mater. Sci. Eng. A, 1998, vol. 243, pp. 206–11. https://doi.org/10.1016/S0921-5093(97)00802-2.10.1016/S0921-5093(97)00802-2 ↗
56. A.E. Davis, J.R. Kennedy, J. Ding, and P.B. Prangnell: Mater. Charact., 2020, vol. 163(February), p. 110298. https://doi.org/10.1016/j.matchar.2020.110298.10.1016/j.matchar.2020.110298 ↗
57. A. Kumar, T. Jayakumar, B. Raj, and D. Banerjee: Philos. Mag., 2008, vol. 88(3), pp. 327–38. https://doi.org/10.1080/14786430701837015.10.1080/14786430701837015 ↗
58. J.W. Lu, Y.Q. Zhao, P. Ge, and H.Z. Niu: Mater. Charact., 2013, vol. 84(96), pp. 105–11. https://doi.org/10.1016/j.matchar.2013.07.014.10.1016/j.matchar.2013.07.014 ↗
59. S.L. Semiatin, J.C. Soper, and I.M. Sukonnik: Acta Metall., 1996, vol. 44(5), pp. 1979–1986. https://doi.org/10.1016/1359-6454(95)00311-8.10.1016/1359-6454(95)00311-8 ↗
60. A.K. Ackerman, et al.: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2020, vol. 51(1), pp. 131–41. https://doi.org/10.1007/s11661-019-05472-x.10.1007/s11661-019-05472-x ↗
61. A.E. Davis, A.E. Caballero, and P.B. Prangnell: Materialia, 2020, https://doi.org/10.1016/j.mtla.2020.100857.10.1016/j.mtla.2020.100857 ↗
62. J.W. Cahn: Acta Metall., 1962, vol. 10(9), pp. 789–98. https://doi.org/10.1016/0001-6160(62)90092-5.10.1016/0001-6160(62)90092-5 ↗
63. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier, Oxford, 1996.
64. W.F. Gale and T.C. Totemeier, eds.: Smithells Metals Reference Book, 8th ed. Elsevier & ASM International, Oxford, 2004.
65. S.A. David and J.M. Vitek: Int. Mater. Rev., 1989, vol. 34(1), pp. 213–45. https://doi.org/10.1179/imr.1989.34.1.213.10.1179/imr.1989.34.1.213 ↗
66. Y. Ohmori, K. Nakai, H. Ohtsubo, and M. Tsunofuri: Mater. Trans. JIM, 1994, vol. 35(4), pp. 238–46. https://doi.org/10.2320/matertrans1989.35.238.10.2320/matertrans1989.35.238 ↗
67. A.E. Davis, J. Donoghue, J.R. Kennedy, N. Byres, and P.B. Prangnell: Acta Mater., 2021, vol. 220, p. 117315. https://doi.org/10.1016/j.actamat.2021.117315.10.1016/j.actamat.2021.117315 ↗
68. H. Okamoto: J. Phase Equilib. Diffus., 2000, vol. 21(3), p. 311.10.1361/105497100770340101 ↗