Hierarchical Characteristics of Hydrogen-Assisted Crack Growth and Microstructural Strain Evolution in Tempered Martensitic Steels: Case of Quasi-cleavage Fracture
Source abstract
Abstract
The local plastic strain evolution associated with crack growth in hydrogen-assisted quasi-cleavage fracture was investigated using tempered lath martensitic steels. The quasi-cleavage crack grew via the following process. After crack initiation, the crack grew sharply to a certain length by repeated episodes of nano-void nucleation and coalescence. When the sharp crack tip intersected microstructural boundaries such as a lath or block, crack deflection/branching occurred. This was followed by crack tip blunting, which temporarily stopped crack growth. Further crack growth was possible via one of the following two routes: (1) sharp crack initiation/growth from the blunt crack tip, and (2) new crack initiation near the blunt crack tip. The newly formed cracks subsequently coalesced. Repetition of this multi-scale crack growth mechanism finally caused a quasi-cleavage fracture. Correspondingly, hierarchical crack morphologies were observed, which coincided with the lath martensitic microstructures and fractographic features. Furthermore, specific correlations were found between hydrogen-assisted cracking behavior and local plastic strain evolution at different spatial scales. Specifically, the largest plastic strain evolution occurred in the region where crack coalescence was observed. The second largest plastic strain evolution occurred when crack tip blunting occurred. Nanoscale local plasticity evolution around a sharp crack was also observed as an appearance of intense slip bands, indicating that the local plasticity played a key role in the hydrogen-related sharp crack growth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. G. Krauss and A.R. Marder: Metall. Trans., 1971, vol. 2, pp. 2343–57. .10.1007/BF02814873 ↗
2. Y. Tomita and K. Okabayashi: Metall. Trans. A., 1986, vol. 17, pp. 1203–9. .10.1007/BF02665319 ↗
3. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–99. .10.1016/S1359-6454(02)00577-3 ↗
4. C.A. Apple, R.N. Caron, and G. Krauss: Metall. Trans., 1974, vol. 5, pp. 593–9. .10.1007/BF02644654 ↗
5. S. Morito, X. Huang, T. Furuhara, T. Maki, and N. Hansen: Acta Mater., 2006, vol. 54, pp. 5323–31. .10.1016/j.actamat.2006.07.009 ↗
6. S. Lynch: Corros. Rev., 2012, vol. 30, pp. 105–23. .
7. M. Nagumo: Fundamentals of Hydrogen Embrittlement. 1st ed. Springer, Tokyo, 2016.10.1007/978-981-10-0161-1 ↗
8. Z.D. Harris, S.K. Lawrence, D.L. Medlin, G. Guetard, J.T. Burns, and B.P. Somerday: Acta Mater., 2018, vol. 158, pp. 180–92. .10.1016/j.actamat.2018.07.043 ↗
9. J. Li, C. Lu, L. Pei, C. Zhang, R. Wang, and K. Tieu: Comput. Mater. Sci., 2019, vol. 165, pp. 40–50. .10.1016/j.commatsci.2019.04.027 ↗
10. A. Tehranchi, X. Zhou, and W.A. Curtin: Acta Mater., 2020, vol. 185, pp. 98–109. .10.1016/j.actamat.2019.11.062 ↗
11. R.A. Oriani and P.H. Josephic: Acta Metall., 1974, vol. 22, pp. 1065–74. .10.1016/0001-6160(74)90061-3 ↗
12. I.M. Robertson, P. Sofronis, A. Nagao, M.L. Martin, S. Wang, D.W. Gross, and K.E. Nygren: Metall. Mater. Trans. B., 2015, vol. 46B, pp. 1085–103. .10.1007/s11663-015-0325-y ↗
13. O. Barrera, D. Bombac, Y. Chen, T.D. Daff, E. Galindo-Nava, P. Gong, D. Haley, R. Horton, I. Katzarov, J.R. Kermode, C. Liverani, M. Stopher, and F. Sweeney: J. Mater. Sci., 2018, vol. 53, pp. 6251–90. .10.1007/s10853-017-1978-5 ↗
14. H.K. Birnbaum and P. Sofronis: Mater. Sci. Eng. A., 1994, vol. 176, pp. 191–202. .10.1016/0921-5093(94)90975-X ↗
15. T. Matsumoto, J. Easrman, and H.K. Birnbaum: Scripta Mater., 1981, vol. 15, p. 5. .
16. Y. Sugiyama and K. Takai: Acta Mater., 2021, vol. 208, p. 116663. .10.1016/j.actamat.2021.116663 ↗
17. M. Nagumo: Mater. Sci. Technol., 2004, vol. 20, pp. 940–50. .10.1179/026708304225019687 ↗
18. K. Takai, H. Shoda, H. Suzuki, and M. Nagumo: Acta Mater., 2008, vol. 56, pp. 5158–67. .10.1016/j.actamat.2008.06.031 ↗
19. M. Nagumo and K. Takai: Acta Mater., 2019, vol. 165, pp. 722–33. .10.1016/j.actamat.2018.12.013 ↗
20. A. Tehranchi and W.A. Curtin: ICF 2017 14th Int Conf. Fract., 2017, vol. 1, pp. 644–5. .
21. Z. Tarzimoghadam, D. Ponge, J. Klöwer, and D. Raabe: Acta Mater., 2017, vol. 128, pp. 365–74. .10.1016/j.actamat.2017.02.059 ↗
22. A. Nagao, M. Dadfarnia, B.P. Somerday, P. Sofronis, and R.O. Ritchie: J. Mech. Phys. Solids., 2018, vol. 112, pp. 403–30. .10.1016/j.jmps.2017.12.016 ↗
23. A. Nagao, C.D. Smith, M. Dadfarnia, P. Sofronis, and I.M. Robertson: Acta Mater., 2012, vol. 60, pp. 5182–9. .10.1016/j.actamat.2012.06.040 ↗
24. A. Nagao, C.D. Smith, M. Dadfarnia, P. Sofronis, and I.M. Robertson: Procedia. Mater. Sci., 2014, vol. 3, pp. 1700–5. .10.1016/j.mspro.2014.06.274 ↗
25. A. Shibata, H. Takahashi, and N. Tsuji: ISIJ Int., 2012, vol. 52, pp. 208–12. .10.2355/isijinternational.52.208 ↗
26. A. Shibata, T. Matsuoka, A. Ueno, and N. Tsuji: Int. J. Fract., 2017, vol. 205, pp. 73–82. .10.1007/s10704-017-0182-6 ↗
27. A. Shibata, T. Murata, H. Takahashi, T. Matsuoka, and N. Tsuji: Metall. Mater. Trans. A., 2015, vol. 46A, pp. 5685–96. .10.1007/s11661-015-3176-x ↗
28. A. Shibata, Y. Momotani, T. Murata, T. Matsuoka, M. Tsuboi, and N. Tsuji: Mater. Sci. Technol. (UK)., 2017, vol. 33, pp. 1524–32. .10.1080/02670836.2017.1312210 ↗
29. M. Yu and T.E. Power: ISIJ Int., 2013, vol. 13086, pp. 1–4. .
30. K. Ogawa, Y. Matsumoto, H. Suzuki, and K. Takai: ISIJ Int., 2019, vol. 59, pp. 1705–14. .10.2355/isijinternational.ISIJINT-2019-130 ↗
31. M. Ohori, T. Chiba, Y. Matsumoto, H. Suzuki, and K. Takai: IOP Conf. Ser. Mater. Sci. Eng., 2018, vol. 461, p. 012062. .10.1088/1757-899X/461/1/012062 ↗
32. M. Calcagnotto, D. Ponge, E. Demir, and D. Raabe: Mater. Sci. Eng. A., 2010, vol. 527, pp. 2738–46. .10.1016/j.msea.2010.01.004 ↗
33. S. Dejan: Process. Appl. Ceram., 2012, vol. 6, pp. 1–13. .10.2298/PAC1201001S ↗
34. M.L. Martin, J.A. Fenske, G.S. Liu, P. Sofronis, and I.M. Robertson: Acta Mater., 2011, vol. 59, pp. 1601–6. .10.1016/j.actamat.2010.11.024 ↗
35. L. Cho, P.E. Bradley, D.S. Lauria, M.L. Martin, M.J. Connolly, J.T. Benzing, E.J. Seo, K.O. Findley, J.G. Speer, and A.J. Slifka: Acta Mater., 2021, vol. 206, p. 116635. .10.1016/j.actamat.2021.116635 ↗
36. T. Neeraj, R. Srinivasan, and J. Li: Acta Mater., 2012, vol. 60, pp. 5160–71. .10.1016/j.actamat.2012.06.014 ↗
37. T.T. Huynh, M. Koyama, Y. Takahashi, S. Hamada, K. Tsuzaki, and H. Noguchi: Scripta Mater., 2020, vol. 178, pp. 99–103. .10.1016/j.scriptamat.2019.11.012 ↗
38. D. Asari, S. Mizokami, M. Fukahori, and K. Takai: Mater. Sci. Eng. A., 2020, vol. 780, p. 139209. .10.1016/j.msea.2020.139209 ↗
39. T. Ohmura, A.M. Minor, E.A. Stach, and J.W. Morris: J. Mater. Res., 2004, vol. 19, pp. 3626–32. .10.1557/JMR.2004.0474 ↗
40. L. Morsdorf, O. Jeannin, D. Barbier, M. Mitsuhara, D. Raabe, and C.C. Tasan: Acta Mater., 2016, vol. 121, pp. 202–14. .10.1016/j.actamat.2016.09.006 ↗
41. A. Laureys, T. Depover, R. Petrov, and K. Verbeken: Mater. Sci. Eng. A., 2017, vol. 690, pp. 88–95. .10.1016/j.msea.2017.02.094 ↗
42. P. Doig: Mater. Sci. Eng., 1981, vol. 48, pp. 181–8. .10.1016/0025-5416(81)90003-3 ↗
43. K. Saito, T. Hirade, and K. Takai: Metall. Mater. Trans. A., 2019, vol. 50A, pp. 5091–102. .10.1007/s11661-019-05450-3 ↗
44. D. Guedes, L. Cupertino Malheiros, A. Oudriss, S. Cohendoz, J. Bouhattate, J. Creus, F. Thébault, M. Piette, and X. Feaugas: Acta Mater., 2020, vol. 186, pp. 133–48. .10.1016/j.actamat.2019.12.045 ↗