journal article·2020-08

Fabrication of Wear-Resistant Ti3AlC2/Al3Ti Hybrid Aluminum Composites by Friction Stir Processing

H. C. Madhu, Vimal Edachery, K. P. Lijesh, Chandra Shekhar Perugu, Satish V. Kailas

Publisher page

Abstract

Hybrid nanocomposites have potential as wear-resistant materials. However, synthesizing these nanocomposites by conventional molten state methods result in agglomeration of reinforcements. To mitigate this issue, in the current study hybrid aluminum nanocomposites were synthesized using friction stir processing (FSP). For this, two blends of titanium and graphite particles were used as reinforcements. These composites were characterized using a stereo microscope, scanning electron microscope, electron probe micro analyzer, X-ray diffraction, and microhardness indenter. During FSP, ternary carbide (Ti3AlC2) and intermetallic (AlTi3) were formed in situ. These compounds improved the hardness of the composites up to four times. Further, these in situ composites were subjected to wear test using pin-on-disk tribometer at various sliding speeds. Polycrystalline alumina disks were chosen as counterface to minimize chemically induce wear. The wear rate of the composites was 5 to 13 times lower than that of the base metal. This excellent resistance to wear in composites was attributed to improved resistance to abrasion and delamination. Furthermore, it was seen that the dominant wear mechanism of the composites changed from abrasive to adhesive wear as the sliding speed increased.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. A Heinz, A Haszler, C Keidel, S Moldenhauer, R Benedictus and WS Miller, Materials Science and Engineering: A 2000, vol. 280, pp. 102-107.10.1016/S0921-5093(99)00674-7 ↗
2. P. M. Colegrove, D. Graham, and T. Miller: Symp. On Friction Stir Welding, 2000.
3. Michael Skillingberg and John Green, LIGHT METAL AGE-CHICAGO- 2007, vol. 65, p. 8.
4. J. Baumeister, J. Banhart and M. Weber, Materials & design 1997, vol. 18, pp. 217-220.10.1016/S0261-3069(97)00050-2 ↗
5. SR Anvari, F Karimzadeh and MH Enayati, Wear 2013, vol. 304, pp. 144-151.10.1016/j.wear.2013.03.014 ↗
6. P. Ajay-Kumar, R. Raj and S. V. Kailas, Materials and Design 2015, vol. 85, pp. 626-634.10.1016/j.matdes.2015.07.054 ↗
7. F. E. Kennedy, A. C. Balbahadur and D. S. Lashmore, Wear 1997, vol. 203-204, pp. 715-721.10.1016/S0043-1648(96)07451-0 ↗
8. RS Mishra, ZY Ma, I Charit, Mater. Sci. Eng. A 2003, vol. 341, pp. 307-310.10.1016/S0921-5093(02)00199-5 ↗
9. I. Charit and R. S. Mishra, Acta Materialia 2005, vol. 53, pp. 4211-4223.10.1016/j.actamat.2005.05.021 ↗
10. Devinder Yadav and Ranjit Bauri, Mater. Sci. Eng. A 2011, vol. 528, pp. 1326-1333.10.1016/j.msea.2010.10.035 ↗
11. Jie Fei, Dan Luo, Chao Zhang, Hejun Li, Yali Cui and Jianfeng Huang, Tribology International 2018, vol. 119, pp. 230-238.10.1016/j.triboint.2017.11.003 ↗
12. M. Sarkari-Khorrami, M. Kazeminezhad, and A.H. Kokabi, Metallurgical and Materials Transactions A 2015, vol. 46, pp. 2021-2034.10.1007/s11661-015-2776-9 ↗
13. R Acuña, MJ Cristóbal, CM Abreu and M Cabeza, Metall. Mater. Trans. A 2019, vol. 50, pp. 2860-2874.10.1007/s11661-019-05172-6 ↗
14. V. Kumar, S. Jain, and S. Muthukumaran, Metall. Mater. Trans. A 2019, vol. 50, pp. 2933-2944.
15. A Shafiei-Zarghani, SF Kashani-Bozorg and A Zarei-Hanzaki, Mater. Sci. Eng. A 2009, vol. 500, pp. 84-91.10.1016/j.msea.2008.09.064 ↗
16. C.F. Chen, P.W. Kao, L.W. Chang and N.J. Ho, Metall. Mater. Trans. A 2010, vol. 41, pp. 513-522.10.1007/s11661-009-0115-8 ↗
17. Y. Mazaheri, F. Karimzadeh and M. H. Enayati, Metall. Mater. Trans. A 2014, vol. 45, pp. 2250-2259.10.1007/s11661-013-2140-x ↗
18. P. Asadi, R. A. Mahdavinejad and S. Tutunchilar, Mater. Sci. Eng. A 2011, vol. 528, pp. 6469-6477.10.1016/j.msea.2011.05.035 ↗
19. Sie Chin Tjong, Materials Science and Engineering: R: Reports 2013, vol. 74, pp. 281-350.10.1016/j.mser.2013.08.001 ↗
20. H. Sarmadi, A. H. Kokabi and S. M. Seyed-Reihani, Wear 2013, vol. 304, pp. 1-12.10.1016/j.wear.2013.04.023 ↗
21. SA Alidokht, A Abdollah-Zadeh, S Soleymani and H Assadi, Materials & Design 2011, vol. 32, pp. 2727-2733.10.1016/j.matdes.2011.01.021 ↗
22. A. Mostafapour-Asl and S. T. Khandani, Mater. Sci. Eng. A 2013, vol. 559, pp. 549-557.10.1016/j.msea.2012.08.140 ↗
23. RA Prado, LE Murr, KF Soto and JC McClure, Mater. Sci. Eng. A 2003, vol. 349, pp. 156-165.10.1016/S0921-5093(02)00750-5 ↗
24. CJ Hsu, PW Kao and NJ Ho, Scripta Materialia 2005, vol. 53, pp. 341-345.10.1016/j.scriptamat.2005.04.006 ↗
25. Q. Zhang, B. L. Xiao and Z. Y. Ma, Intermetallics 2013, vol. 40, pp. 36-44.10.1016/j.intermet.2013.04.003 ↗
26. CJ Hsu, PW Kao and NJ Ho, Materials Letters 2007, vol. 61, pp. 1315-1318.10.1016/j.matlet.2006.07.021 ↗
27. H. C. Madhu, P. Ajay-Kumar, C. S. Perugu, S.V. Kailas, Journal of Materials Engineering and Performance 2018, vol. 27, pp. 1318-1326.10.1007/s11665-018-3188-y ↗
28. GL You, NJ Ho and PW Kao, Materials Letters 2013, vol. 90, pp. 26-29.10.1016/j.matlet.2012.09.028 ↗
29. Shamiparna Das, Nelson Y. Martinez, Rajiv S. Mishra, Glenn J. Grant and Saumyadeep Jana, Metall. Mater. Trans. A 2017, vol. 48, pp. 2115-2119.10.1007/s11661-017-4013-1 ↗
30. A. Kumar, D. Yadav, C.S. Perugu, S.V Kailas, Materials & Design 2017, vol. 113, pp. 99-108.10.1016/j.matdes.2016.09.101 ↗
31. S. Dixit, A. Mahata, D. R. Mahapatra, S.V. Kailas, K. Chattopadhyay, Composites B 2018, vol. 136, pp. 63-71.10.1016/j.compositesb.2017.10.028 ↗
32. P. Ajay-Kumar, H.C. Madhu, A. Pariyar, C.S. Perugu, S.V. Kailas, U. Garg, P. Rohatgi, Mater. Sci. Eng. A 2020, vol. 769, p. 138517.10.1016/j.msea.2019.138517 ↗
33. M. J. Ghazali, W. M. Rainforth and H. Jones, Wear 2005, vol. 259, pp. 490-500.10.1016/j.wear.2005.02.089 ↗
34. M. J. Ghazali, W. M. Rainforth and H. Jones, Tribology International 2007, vol. 40, pp. 160-169.10.1016/j.triboint.2005.09.009 ↗
35. Judy Schneider, Ronald Beshears and Arthur C. Nunes, Mater. Sci. Eng. A 2006, vol. 435-436, pp. 297-304.10.1016/j.msea.2006.07.082 ↗
36. S. Dixit, H. C. Madhu, S. V. Kailas and K. Chattopadhyay, International Journal of Advanced Manufacturing Technology 2017, 91, pp. 9–12.10.1007/s00170-016-9974-5 ↗
37. A. Kar, S. Suwas, S.V. Kailas, JOM 2019, vol. 71, pp. 444-451.10.1007/s11837-018-3152-1 ↗
38. L. Xu, Y. Y. Cui, Y. L. Hao and R. Yang, Mater. Sci. Eng. A 2006, vol. 435-436, pp. 638-647.10.1016/j.msea.2006.07.077 ↗
39. Q. Zhang, B. L. Xiao, Q. Z. Wang and Z. Y. Ma, Metall. Mater. Trans. A 2014, vol. 45, pp. 2776-2791.10.1007/s11661-014-2221-5 ↗
40. X. H. Wang and Y. C. Zhou, Journal of Materials Science & Technology 2010, vol. 26, pp. 385-416.10.1016/S1005-0302(10)60064-3 ↗
41. CJ Hsu, CY Chang, PW Kao, NJ Ho and CP Chang, Acta Materialia 2006, vol. 54, pp. 5241-5249.10.1016/j.actamat.2006.06.054 ↗
42. C.J. Smithells, Smithells Metals Reference Book, Elsevier Butterworth-Heinemann, Boston, 2004.
43. N. V. Tzenov and M. W. Barsoum, Journal of the American Ceramic Society 2000, vol. 83, pp. 825-832.10.1111/j.1151-2916.2000.tb01281.x ↗
44. X. H. Wang and Y. C. Zhou, Acta Materialia 2002, vol. 50, pp. 3141-3149.
45. Z. Ge, K. Chen, J. Guo, H. Zhou, J. M. F. Ferreira, Journal of the European Ceramic Society 2003, vol. 23, pp. 567-574.10.1016/S0955-2219(02)00098-5 ↗
46. N. Shahin, Sh Kazemi and A. Heidarpour, Advanced Powder Technology 2016, vol. 27, pp. 1775-1780.10.1016/j.apt.2016.06.008 ↗
47. Chunqing Peng, Chang-An Wang, Yang Song and Yong Huang, Mater. Sci. Eng. A 2006, vol. 428, pp. 54-58.10.1016/j.msea.2006.04.042 ↗
48. RL Deuis, C Subramanian and JM Yellup, Composites Science and Technology 1997, vol. 57, pp. 415-435.10.1016/S0266-3538(96)00167-4 ↗
49. A.T. Alpas, J. Zhang, Wear 1992, vol. 155, pp. 83-104.10.1016/0043-1648(92)90111-K ↗
50. Yoshimi Watanabe, Noboru Yamanaka and Yasuyoshi Fukui, Metall. Mater. Trans. A 1999, vol. 30, pp. 3253-3261.10.1007/s11661-999-0235-1 ↗
51. M. Nofar, H. R. Madaah-Hosseini and N. Kolagar-Daroonkolaie, Materials & Design 2009, vol. 30, pp. 280-286.10.1016/j.matdes.2008.04.071 ↗
52. S. C. Lim and M. F. Ashby, Acta Metallurgica 1987, vol. 35, pp. 1-24.10.1016/0001-6160(87)90209-4 ↗