Wear Performance Analysis of Aluminum Matrix Composites and Optimization of Process Parameters Using Statistical Techniques
Source abstract
Abstract
This paper presents the wear behavior of gears manufactured using Al matrix composites (AMCs) reinforced with microparticles (with sizes of 40 µm and contents of 5 and 10 wt pct) and nanoparticles (with sizes of < 100 nm and contents of 1 and 2 wt pct) of SiC, fabricated using stir casting. Specially designed test rig was manufactured for determining the wear performance of these gears and investigated under different applied loads and experiment times. The composite prepared using 2 pct SiC nanoparticle reinforcements was superior to other compositions tested in terms of tribological applications. The effectiveness of nanoparticles compared to that of microparticles was analyzed statistically. Taguchi’s method was used for optimizing the wear parameters. Furthermore, the influence of the experiment time, applied load, and SiC content on the wear was investigated and a regression equation was developed for AMCs reinforced with micro- and nanoparticles. The “smaller is better” characteristic was selected as the objective of this model to analyze the wear resistance. The experiment time and applied load had the most significant effect, followed by the SiC content, in the case of microparticles, whereas for nanoparticles, the applied load was the least significant factor when compared to experiment time and SiC content.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. 1 M.K. Surappa: Sadhana, 2003, vol. 28, pp. 319–34.10.1007/BF02717141 ↗
2. E. Candan, H. Ahlatci, and H. Cimenoglu: Wear, 2001, vol. 247, pp. 133–138.10.1016/S0043-1648(00)00499-3 ↗
3. A.H. Idrisi and A.H.I. Mourad: in 2019 Advances in Science and Engineering Technology International Conferences (ASET), IEEE, 2019, pp. 1–5.
4. A.H. Idrisi and A.-H.I. Mourad: in ASME 2017 Pressure Vessels and Piping Conference, American Society of Mechanical Engineers, 2017, p. V06AT06A033.
5. 5 J.M.G. De Salazar and M.I. Barrena: Wear, 2004, vol. 256, pp. 286–93.10.1016/S0043-1648(03)00389-2 ↗
6. 6 S.K. Ghosh and P. Saha: Mater. Des., 2011, vol. 32, pp. 139–45.10.1016/j.matdes.2010.06.020 ↗
7. 7 S.W. Kim, U.J. Lee, S.W. Han, D.K. Kim, and K. Ogi: Compos. Part B Eng., 2003, vol. 34, pp. 737–45.10.1016/S1359-8368(03)00081-7 ↗
8. A. Idrisihussain, V. Singhdev, and V. Saxena: Int. J. Sci. Res. Eng. Technol., 2014, vol. 2, pp. 697–704.
9. A. Idrisi Hussain and S. Deva: Int. J. Sci. Res. Eng. Technol., 2014, pp. 697–704.
10. 10 L.J. Yang: Compos. Sci. Technol., 2003, vol. 63, pp. 575–83.10.1016/S0266-3538(02)00223-3 ↗
11. 11 A.M. Al-Qutub, I.M. Allam, and T.W. Qureshi: J. Mater. Process. Technol., 2006, vol. 172, pp. 327–31.10.1016/j.jmatprotec.2005.10.022 ↗
12. 12 A.M. Al-Qutub, I.M. Allam, and M.A.A. Samad: J. Mater. Sci., 2008, vol. 43, pp. 5797–803.10.1007/s10853-008-2867-8 ↗
13. 13 F. Saba, S.A. Sajjadi, M. Haddad-Sabzevar, and F. Zhang: Diam. Relat. Mater., 2018, vol. 89, pp. 180–9.10.1016/j.diamond.2018.09.007 ↗
14. 14 M.F. Kilicaslan and E. Karaköse: J. Alloys Compd., 2018, vol. 738, pp. 182–7.10.1016/j.jallcom.2017.12.130 ↗
15. 15 L. Wu, R. Wu, L. Hou, J. Zhang, and M. Zhang: J. Alloys Compd., 2018, vol. 750, pp. 530–6.10.1016/j.jallcom.2018.04.035 ↗
16. 16 A. Fathy, A. Abu-Oqail, and A. Wagih: Ceram. Int., 2018, vol. 44, pp. 22135–45.10.1016/j.ceramint.2018.08.326 ↗
17. 17 A.M. Al-Qutub, A. Khalil, N. Saheb, and A.S. Hakeem: Wear, 2013, vol. 297, pp. 752–61.10.1016/j.wear.2012.10.006 ↗
18. 18 D. Lu, Y. Jiang, and R. Zhou: Wear, 2013, vol. 305, pp. 286–90.10.1016/j.wear.2012.11.079 ↗
19. 19 C.S. Lee, Y.H. Kim, K.S. Han, and T. Lim: J. Mater. Sci., 1992, vol. 27, pp. 793–800.10.1007/BF02403898 ↗
20. 20 S.A. Sajjadi, H.R. Ezatpour, and H. Beygi: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8765–71.10.1016/j.msea.2011.08.052 ↗
21. 21 H.R. Ezatpour, S.A. Sajjadi, M.H. Sabzevar, and Y. Huang: Mater. Des., 2014, vol. 55, pp. 921–8.10.1016/j.matdes.2013.10.060 ↗
22. 22 H. Abdizadeh, R. Ebrahimifard, and M.A. Baghchesara: Compos. Part B Eng., 2014, vol. 56, pp. 217–21.10.1016/j.compositesb.2013.08.023 ↗
23. 23 S. Gargatte, R.R. Upadhye, V.S. Dandagi, S.R. Desai, and B.S. Waghamode: J. Miner. Mater. Charact. Eng., 2013, vol. 1, p. 8.
24. R.S. Rana, R. Purohit, A. Kumarsharma, and S. Rana: Procedia Mater. Sci., 2014, vol. 6, pp. 503–11.10.1016/j.mspro.2014.07.064 ↗
25. 25 M. Singla, L. Singh, and V. Chawla: J. Miner. Mater. Charact. Eng., 2009, vol. 8, p. 813.
26. 26 M.Ş. Tunalioğlu and B. Tuç: Wear, 2014, vol. 309, pp. 208–15.10.1016/j.wear.2013.11.016 ↗
27. 27 Y. Sahin: Mater. Des., 2003, vol. 24, pp. 95–103.10.1016/S0261-3069(02)00143-7 ↗
28. A.H. Idrisi, A.-H.I. Mourad, D.T. Thekkuden, and J.V. Christy: in IOP Conference Series: Materials Science and Engineering, vol. 324, IOP Publishing, 2018, p. 12087.10.1088/1757-899X/324/1/012087 ↗
29. 29 S. Basavarajappa, G. Chandramohan, and J.P. Davim: Mater. Des., 2007, vol. 28, pp. 1393–8.10.1016/j.matdes.2006.01.006 ↗
30. 30 R.S. Rana, R. Purohit, and S. Das: Int. J. Sci. Res, 2013, vol. 3, pp. 1–7.
31. 31 J.P. Davim: J. Mater. Process. Technol., 2003, vol. 132, pp. 340–4.10.1016/S0924-0136(02)00946-9 ↗
32. 32 T. Miyajima and Y. Iwai: Wear, 2003, vol. 255, pp. 606–16.10.1016/S0043-1648(03)00066-8 ↗
33. 33 P. Narasimman, M. Pushpavanam, and V.M. Periasamy: Wear, 2012, vol. 292, pp. 197–206.10.1016/j.wear.2012.05.009 ↗
34. 34 I. Garcia, J. Fransaer, and J.-P. Celis: Surf. Coatings Technol., 2001, vol. 148, pp. 171–8.10.1016/S0257-8972(01)01336-6 ↗
35. 35 K. Kumar, S. Arul, G. Sriram, V.N. Mani, and V.P. Kumar: Int. J. Curr. Eng. Sci. Res., 2016, vol. 3, pp. 96–103.
36. 36 C. Garcia-Cordovilla, J. Narciso, and E. Louis: Wear, 1996, vol. 192, pp. 170–7.10.1016/0043-1648(95)06801-5 ↗
37. 37 M. Moazami-Goudarzi and F. Akhlaghi: Tribol. Int., 2016, vol. 102, pp. 28–37.10.1016/j.triboint.2016.05.013 ↗
38. 38 S. Kumar and V. Balasubramanian: Wear, 2008, vol. 264, pp. 1026–34.10.1016/j.wear.2007.08.006 ↗
39. 39 J.P. Davim: J. Mater. Process. Technol., 2003, vol. 132, pp. 250–4.10.1016/S0924-0136(02)00935-4 ↗
40. 40 T. Kıvak: Measurement, 2014, vol. 50, pp. 19–28.10.1016/j.measurement.2013.12.017 ↗
41. 41 M.H. Cetin, B. Ozcelik, E. Kuram, and E. Demirbas: J. Clean. Prod., 2011, vol. 19, pp. 2049–56.10.1016/j.jclepro.2011.07.013 ↗