journal article·2019-09-15

Effect of Ferrite/Martensite Phase Size on Tensile Behavior of Dual-Phase Steels with Nano-Precipitation of Vanadium Carbides

Elango Chandiran, Yu Sato, Naoya Kamikawa, Goro Miyamoto, Tadashi Furuhara

Publisher page

Abstract

This study investigates the effect of ferrite/martensite phase size and dispersion of nano-precipitates in ferrite on strength, ductility, and fracture behavior of dual-phase (DP) steels. Dispersion of nano-precipitates in ferrite improves the strength with keeping sufficient uniform elongation and post-uniform elongation, while decrease in ferrite/martensite phase size has a little effect on the increase in strength in the phase size range investigated. However, the refinement of phase size significantly improves the post-uniform elongation and reduction in area. It is concluded therefore that a simultaneous combination of refinement of ferrite/martensite phase size and dispersion of nano-precipitation in ferrite is effective to significantly improve the strength and strength–post-uniform elongation in DP steels. Quantitative analysis of void formation reveals that fracture by martensite cracking is a primary fracture mechanism in coarse phase-sized DP samples, while ferrite/martensite interface decohesion becomes a dominant fracture mechanism in fine phase-sized DP samples. It is suggested that the refinement of phase size is a promising strategy to change the fracture behavior from brittle to ductile manner, leading to an enhancement of local deformability after the necking.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. M. Takahashi: Nippon Steel Tech. Report, 2003, vol. 88, pp. 2-7.
2. H. Takechi: JOM, 2008, vol. 60, pp. 22-26.10.1007/s11837-008-0160-6 ↗
3. M. Y. Demeri: Advanced High-Strength Steels: Science, Technology, and Application, 1st ed., ASM International, Ohio OH, 2013.10.31399/asm.tb.ahsssta.9781627082792 ↗
4. ArcelorMittal, http://automotive.arcelormittal.com. Accessed 07 Jan 2019.
5. Nippon Steels & Sumitomo Metal Corporation, http://www.nssmc.com. Accessed 07 Jan 2019.
6. P.-H. Chang and A. G. Preban: Acta Mater, 1985, vol. 33, pp. 897-903.10.1016/0001-6160(85)90114-2 ↗
7. A. Bag, K. K. Ray and E. S. Dwarakadasa: Metall. Mater. Trans. A, 2014, vol. 30A, pp. 1193-202.
8. T. Matsuno, D. Maeda, H. Shutoh, A. Uenishi and M. Suehiro: ISIJ Int, 2014, vol. 54, pp. 938-44.10.2355/isijinternational.54.938 ↗
9. Z. Jiang, Z. Guan and J. Lian: Mater. Sci. Eng. A, 2014, vol. 190, pp. 55-64.10.1016/0921-5093(94)09594-M ↗
10. K. Hasegawa, Y. Toji, H. Minami, H. Ikeda, T. Morikawa and K. Higashida: Tetsu-to-Hagané, 2012, vol. 98, pp. 320-27.10.2355/tetsutohagane.98.320 ↗
11. D. K. Mondal and R. M. Dey: Mater. Sci. Eng. A, 1992, vol. 149, pp. 173-81.10.1016/0921-5093(92)90378-E ↗
12. M. Calcagnotto, D. Ponge and D. Raabe: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7832-40.10.1016/j.msea.2010.08.062 ↗
13. M. Mazinani and W. J. Poole: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 328-39.10.1007/s11661-006-9023-3 ↗
14. K. Park, M. Nishiyama, N. Nakada, T. Tsuchiyama and S. Takaki: Mater. Sci. Eng. A, 2014, vol. 604, pp. 135-41.10.1016/j.msea.2014.02.058 ↗
15. F. H. Samuel: Mater. Sci. Eng, 1985, vol. 75, pp. 51-66.10.1016/0025-5416(85)90177-6 ↗
16. H.-C. Chen and G.-H. Cheng: J. Mater. Sci, 1989, vol. 24, pp. 1991-94.10.1007/BF02385411 ↗
17. S. S. M. Tavares, P. D. Pedroza, J. R. Teodósio and T. Gurova: Scripta Mater, 1999, vol. 40, pp. 887-92.10.1016/S1359-6462(99)00042-1 ↗
18. K. Hasegawa, K. Kawamura, T. Urabe and Y. Hosoya: ISIJ Int, 2014, vol. 44, pp. 603-09.10.2355/isijinternational.44.603 ↗
19. H. Minami, K. Nakayama, T. Morikawa, K. Higashida, Y. Toji and K. Hasegawa: Tetsu-to-Hagané, 2011, vol. 97, pp. 493-500.10.2355/tetsutohagane.97.493 ↗
20. A. A. Sayed and S. Kheirandish: Mater. Sci. Eng. A, 2014, vol. 532, pp. 21-25.10.1016/j.msea.2011.10.056 ↗
21. A. Kamp, S. Celotto and D. N. Hanlon: Mater. Sci. Eng. A, 2012, vol. 538, pp. 35-41.10.1016/j.msea.2012.01.008 ↗
22. M. Azuma, S. Goutianos, N. Hansen, G. Winther and X. Huang: Mater. Sci. Tech, 2012, vol. 28, pp. 1092-100.10.1179/1743284712Y.0000000006 ↗
23. N. Nakada, M. Nishiyama, N. Koga, T. Tsuchiyama and S. Takaki: Tetsu-to-Hagané, 2014, vol. 100, pp. 1238-45.10.2355/tetsutohagane.100.1238 ↗
24. I. Machida, M. Narita, R. Kureura, M. Morita, N. Aoyagi and M. Sano: SAE Paper No. 940536, 1994.
25. M. Morita, T. Shimizu, O. Furukimi, N. Aoyagi and T. Kato: Materia Japan, 1998, vol. 37, pp. 513-15.10.2320/materia.37.513 ↗
26. N. Kamikawa, M. Hirohashi, Y. Sato, Elango C, G. Miyamoto and T. Furuhara: ISIJ Int, 2015, vol. 55, pp. 1781-90.10.2355/isijinternational.ISIJINT-2015-106 ↗
27. C. Elango, N. Kamikawa, G. Miyamoto and T. Furuhara: in Proc. of Asia Steel, Yokohama, 2015, pp. 516–18.
28. G. Miyamoto, R. Hori, B. Poorganji and T. Furuhara: ISIJ Int, 2011, vol. 51, pp. 1733-39.10.2355/isijinternational.51.1733 ↗
29. N. Kamikawa, Y. Abe, G. Miyamoto, Y. Funakawa and T. Furuhara: ISIJ Int, 2014, vol. 54, pp. 212-21.10.2355/isijinternational.54.212 ↗
30. A. J. Abdalla, L. R. O. Hein, M. S. Pereira, T. M. Hashimoto: Mater. Sci. Tech, 1999, vol. 15, pp. 1167-170.10.1179/026708399101505211 ↗
31. S. Gündüz: Mater. Letters, 2009, vol. 63, pp. 2381-383.10.1016/j.matlet.2009.08.015 ↗
32. G. Krauss: Mater. Sci. Eng. A, 1999, vol. 275, pp. 40-57.10.1016/S0921-5093(99)00288-9 ↗
33. P. Movahed, S. Kolahgar, S.P.H. Marashi, M. Pouranvari, N. Parvin: Mater. Sci. Eng. A, 2009, vol. 499, pp. 1-6.10.1016/j.msea.2009.05.046 ↗
34. J.M. Rigsbee and P.J. VanderArend, Formable HSLA and Dual-Phase Steels (edited by A.T. Davenport), Proc. of the Metallurgical Society of AIME, New York, 1979, pp. 58–88.
35. A. Karmakar, S. Sivaprasad, S. Kundu, D. Chakrabarti: Metall. Trans. A, 2014, vol. 45A, pp. 1659-64.10.1007/s11661-014-2228-y ↗
36. X. J. He, N. Terao and A. Berghezan: Metal Sci, 1984, vol. 18, pp. 367-73.10.1179/030634584790419953 ↗
37. Y. L. Su and J. Gurland: Mater. Sci. Eng, 1987, vol. 95, pp. 151-65.10.1016/0025-5416(87)90507-6 ↗
38. S. Ankem, H. Margolin, C.A. Greene, B.W. Neuberger, P.G. Oberson: Prog Mater Sci, 2006, vol. 51, pp. 632-709.10.1016/j.pmatsci.2005.10.003 ↗
39. N. J. Kim and G. Thomas: Metall. Trans. A, 1981, vol. 12, pp. 483-89.10.1007/BF02648546 ↗
40. D.J. Lloyd: Metal Sci, 1980, vol. 14, pp. 193-98.10.1179/msc.1980.14.5.193 ↗
41. C.Y. Yu, P.W. Kao and C.P. Cheng: Acta Mater, 2005, vol. 53, pp. 4019-28.10.1016/j.actamat.2005.05.005 ↗
42. N. Kamikawa, X. Huang, N. Tsuji and N. Hansen: Acta Mater, 2009, vol. 57, pp. 4198-208.10.1016/j.actamat.2009.05.017 ↗
43. G. E. Dieter: Mechanical Metallurgy, 4th ed., McGraw-Hill Book Co., London, 1988, pp. 289-90.
44. S. P. Tsai, C. H Jen, H. W. Yen, C. Y. Chen, M. C. Tsai, C. Y. Huang and J. R. Yang: Mater. Charact, 2017, vol. 123, pp. 153-58.10.1016/j.matchar.2016.11.023 ↗
45. N. Saeidi, F. Ashrafizadeh, B. Niroumand: Mater. Sci. Eng. A, 2014, vol. 599, pp. 145-149.10.1016/j.msea.2014.01.053 ↗