journal article·2019-02-15Open access

Efficacy of Borides in Grain Refining Al-Si Alloys

Leandro Bolzoni, Nadendla Hari Babu

Abstract

Abstract The grain refining efficacy of titanium, aluminum, and niobium borides, as well as niobium aluminides, introduced via commercial and lab made master alloys on Al-Si alloys was investigated. Significant grain refinement is achieved via the introduction of these heterogeneous nuclei regardless of their chemistry, stoichiometry of the master alloy, and addition rate. However, the grain refinement is affected by variable such as contact time, as the inoculating particle may sediment or be poisoned, and cooling rate. Specifically, a faster cooling rate generally leads to finer grains due to the lower time for grain growth. In the case of borides, the chemical inoculation efficiency is greatly affected by their thermodynamic stability in molten Al-Si alloys. Conversely, the grain refining potency of properitectic Al3Nb remains unaffected. The underlying grain refining mechanism was finally investigated using current models based on the growth restriction factor Q to simultaneously consider the effect of nucleant potency and alloy chemistry. Among Ti-, Al-, and Nb-based borides with similar particle size and distribution, the latter are the most efficient to grain refine Al-Si alloys.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. 1. S. K. Shaha, F. Czerwinski, W. Kasprzak, J. Friedman and D. L. Chen, Journal of Alloys and Compounds, 2014, 615, 1019-1031.10.1016/j.jallcom.2014.06.210 ↗
2. 2. M. A. Easton, M. Qian, A. Prasad and D. H. StJohn, Current Opinion in Solid State and Materials Science, 20 16, 20, 13-24.10.1016/j.cossms.2015.10.001 ↗
3. 3. R. Schmid-Fetzer and A. Kozlov, Acta Materialia, 2011, 59, 6133-6144.10.1016/j.actamat.2011.06.026 ↗
4. 4. M. Johnsson, Zeitschrift für Metallkunde, 1984, 85, 781-785.
5. 5. G. S. V. Kumar, B. S. Murty and M. Chakraborty, Journal of Alloys and Compounds, 2009, 472, 112-120.10.1016/j.jallcom.2008.04.095 ↗
6. 6. D. Qiu, J. A. Taylor, M. X. Zhang and P. M. Kelly, Acta Materialia, 2007, 55, 1447-1456.10.1016/j.actamat.2006.09.046 ↗
7. 7. V. E. Bazhenov and M. A. Magura, Materials Science and Technology, 2018, 34, 1287-1294.10.1080/02670836.2018.1425237 ↗
8. A. L. Greer: J. Chem. Phys., 2016, vol. 145, art. no. 211704.10.1063/1.4968846 ↗
9. 9. T. Wang, H. Fu, Z. Chen, J. Xu, J. Zhu, F. Cao and T. Li, Journal of Alloys and Compounds, 2012 511, 45-49.10.1016/j.jallcom.2011.09.009 ↗
10. 10. Y. Birol, Materials Science and Technology, 2012, 28, 481-486.10.1179/1743284711Y.0000000058 ↗
11. 11. L. Yu, X. Liu, Z. Wang and X. Bian, Journal of Materials Science, 2005, 40, 3865-3867.10.1007/s10853-005-2893-8 ↗
12. 12. H. Zhao, H. Bai, J. Wang and S. Guan, Materials Characterization, 2009, 60, 377-383.10.1016/j.matchar.2008.10.012 ↗
13. 13. P. Li, S. Liu, L. Zhang and X. Liu, Materials and Design, 2013, 47, 522-528.10.1016/j.matdes.2012.12.033 ↗
14. 14. Y. Birol, Journal of Alloys and Compounds, 2012, 513, 150-53.10.1016/j.jallcom.2011.10.010 ↗
15. 15. Y. Birol, Materials Science and Technology, 2012, 28, 385-389.10.1179/1743284711Y.0000000049 ↗
16. A. N. Kolmogorov and S. Curtarolo: Phys. Rev. B, 2006, vol. 74, art. no. 224507.10.1103/PhysRevB.74.224507 ↗
17. 17. X. Wang, Journal of Alloys and Compounds, 2017, 722, 302-306.10.1016/j.jallcom.2017.06.107 ↗
18. 18. J. Li, G. Yang, F. S. Hage, Z. Chen, T. Wang, Q. M. Ramasse and P. Schumacher, Materials Characterization, 2017, 128, 7-13.10.1016/j.matchar.2017.03.029 ↗
19. 19. L. Bolzoni, M. Nowak and N. Hari Babu, Materials Science and Engineering A, 2015, 628, 230-237.10.1016/j.msea.2015.01.053 ↗
20. 20. L. Bolzoni and N. Hari Babu, Journal of Materials Processing Technology, 2015, 222, 219-223.10.1016/j.jmatprotec.2015.03.011 ↗
21. 21. L. Bolzoni and N. Hari Babu, Materials Letters, 2017, 201, 9-12.10.1016/j.matlet.2017.04.117 ↗
22. 22. L. Bolzoni, M. Nowak and N. Hari Babu, Journal of Alloys and Compounds, 2015, 623, 79-82.10.1016/j.jallcom.2014.10.069 ↗
23. 23. Z. Chen, T. Wang, L. Gao, H. Fu and T. Li, Materials Science and Engineering A, 2012, 553, 32-36.10.1016/j.msea.2012.05.088 ↗
24. 24. V. T. Witusiewicz, A. A. Bondar, U. Hecht and T. Y. Velikanova, Journal of Alloys and Compounds, 2009, 472, 133-61.10.1016/j.jallcom.2008.05.008 ↗
25. L. Bolzoni, M. Xia, and N. Hari Babu: Sci. Rep., 2016, vol. 6, art. no. 39554.10.1038/srep39554 ↗
26. 26. A. Cibula, The Journal of the Institute of Metals, 1951, 80, 1-16.
27. 27. F. A. Crossley and L. F. Mondolfo, Journal of Metals (Trans. AIME), 1951, 191, 1143-48.
28. 28. G. P. Jones, J. Beech, H. Jones (Eds.), Solidification Processing, Sheffield: University of Sheffield, 1998, 496-497.
29. 29. P. S. Mohanty and J. E. Gruzleski, Acta Metallurgica et Materialia, 1995, 43, 2001-2012.10.1016/0956-7151(94)00405-7 ↗
30. 30. I. Maxwell and A. Hellawell, Acta Metallurgica, 1975, 23, 229-237.10.1016/0001-6160(75)90188-1 ↗
31. 31. A. L. Greer, A. M. Bunn, A. Tronche, P. V. Evans and D. J. Bristow, Acta Materialia, 2000, 48, 2823-2835.10.1016/S1359-6454(00)00094-X ↗
32. 32. M. A. Easton and D. H. St. John, Acta Materialia, 2001, 49, 1867-1878.10.1016/S1359-6454(00)00368-2 ↗
33. 33. Z. Chen, H. Kang, G. Fan, J. Li, Y. Lu, J. Jie, Y. Zhang, T. Li, X. Jian and T. Wang, Acta Materialia, 2016, 120, 168-178.10.1016/j.actamat.2016.08.045 ↗
34. 34. S. Nafisi and R. Ghomashchi, Materials Science and Engineering A, 2007, 452-453, 445-453.10.1016/j.msea.2006.10.145 ↗
35. 35. X. Wang, Journal of Alloys and Compounds, 2005, 403, 283-287.10.1016/j.jallcom.2005.04.204 ↗
36. 36. V. T. Witusiewicz, A. A. Bondar, U. Hecht, J. Zollinger, L. V. Artyukh and T. Y. Velikanova, Journal of Alloys and Compounds, 2009, 474, 86-104.10.1016/j.jallcom.2008.06.128 ↗
37. 37.J. A. Spittle, Foundry Trade J., 10, 335–340 (2008).
38. 38.J. A. Spittle, Foundry Trade J., 10, 308–314 (2008).
39. 39. M. Easton and D. H. St. John, Metallurgical and Materials Transactions A, 1999, 30, 1613-1623.10.1007/s11661-999-0098-5 ↗
40. 40. M. Easton and D. St. John, Metallurgical Transactions A, 2005, 36, 1911-1920.10.1007/s11661-005-0054-y ↗
41. 41. P. S. Mohanty and J. E. Gruzleski, Acta Materialia, 1996, 44, 3749-3760.10.1016/1359-6454(96)00021-3 ↗