journal article·2018-09

Phase-Field Modeling of Precipitation Growth and Ripening During Industrial Heat Treatments in Ni-Base Superalloys

Michael Fleck, Felix Schleifer, Markus Holzinger, Uwe Glatzel

Publisher page

Abstract

We develop a phase-field model for the simulation of chemical diffusion limited microstructure evolution, with a special focus on precipitation growth and ripening in multicomponent alloys. Further, the model accounts for elastic effects, which result from the lattice-misfit between the precipitate particles and the parent matrix phase. To be able to simulate particle growth and ripening in one dimension, we introduce an extra optional driving-force term, which mimics the effect of curved interfaces in one dimension. As a case study, we consider the one-dimensional (1D) $$\gamma $$ ′-precipitation growth and ripening under the influence of a realistic multistep heat treatment in the multicomponent Ni-based superalloy CMSX-4. The required temperature-dependent thermodynamic and kinetic input parameters are obtained from CALPHAD calculations using the commercial software-package ThermoCalc. The required temperature-dependent elastic parameters are measured in-house at the chair of Metals and Alloys, using resonance ultrasound spectroscopy and high-temperature X-ray defraction. Finally, the model is applied to calculate the equilibrium shape of a single $$\gamma $$ ′-particle with periodic boundary conditions. Relations to the shapes of $$\gamma $$ ′-particles in respect of heat-treated experimental microstructures are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Solidification and crystal growth phenomena · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. R. C. Reed: The Superalloys Fundamentals and Applications, 1st ed. Cambridge University Press, New York, 2006, pp. 77–81.10.1017/CBO9780511541285 ↗
2. W. Boettinger, J. Warren, C. Beckermann, and A. Karma: Annu. Rev. Mater. Res., 2002, vol. 32, pp. 163.10.1146/annurev.matsci.32.101901.155803 ↗
3. M. Asta, C. Beckermann, A. Karma, W. Kurz, R. Napolitano, M. Plapp, G. Purdy, M. Rappaz, and R. Trivedi: Acta Mater., 2009, vol. 57, pp. 941.10.1016/j.actamat.2008.10.020 ↗
4. I. Steinbach: Modelling Simul. Mater. Sci. Eng., 2009, vol. 17, pp. 073001.10.1088/0965-0393/17/7/073001 ↗
5. I. Steinbach: Annu. Rev. Mater. Res., 2013, vol. 43, pp. 89.10.1146/annurev-matsci-071312-121703 ↗
6. I. Steinbach and O. Shchyglo: Curr. Opin. Solid State Mater. Sci., 2011, vol. 15, pp. 87.10.1016/j.cossms.2011.01.001 ↗
7. Y. Wang and J. Li: Acta Mater., 2010, vol. 58, pp. 1212.10.1016/j.actamat.2009.10.041 ↗
8. M. Cottura, Y. Le Bouar, B. Appolaire, and A. Finel: Acta Mater., 2015, vol. 94, pp. 15–25.10.1016/j.actamat.2015.04.034 ↗
9. A. Gaubert, M. Jouiad, J. Cormier, Y. Le Bouar, and J. Ghighi: Acta Mater., 2015, vol. 84, pp. 237–255.10.1016/j.actamat.2014.10.034 ↗
10. A. Gaubert, Y. Le Bouar, and A. Finel: Philos. Mag., 2010, vol. 90, pp. 375.10.1080/14786430902877802 ↗
11. J. Kundin, L. Mushongera, T. Goehler, and H. Emmerich: Acta Mater., 2012, vol. 60, pp. 3758.10.1016/j.actamat.2012.03.023 ↗
12. Y. Pang, Y.S. Li, X. Wu, W. Liu, and Z. Hou: Int. J. Mater. Res., 2015, vol. 106, pp. 108–113.10.3139/146.111160 ↗
13. M. S. Bhaskar: Comp. Mater. Sci., 2018, vol. 146, pp. 102.10.1016/j.commatsci.2018.01.021 ↗
14. L.T. Mushongera, M. Fleck, J. Kundin, Y. Wang, and H. Emmerich: Acta Mater., 2015, vol. 93, pp. 60.10.1016/j.actamat.2015.03.048 ↗
15. L. T. Mushongera, M. Fleck, J. Kundin, F. Querfurth, and H. Emmerich: Adv. Eng. Mater., 2015, vol. 17, pp. 1149–1157.10.1002/adem.201500168 ↗
16. Calculated with thermocalc using TTNi8 and MobNi1. http://www.thermocalc.com.
17. M. Fleck, L. T. Mushongera, D. Pilipenko, K. Ankit, and H. Emmerich: Eur. Phys. J. Plus, 2011, vol. 126, pp. 95.10.1140/epjp/i2011-11095-7 ↗
18. K. Kassner, C. Misbah, J. Müller, J. Kappey, and P. Kohlert: Phys. Rev. E, 2001, vol. 63, pp. 036117.10.1103/PhysRevE.63.036117 ↗
19. J. Heulens, B. Blanpain, and N. Moelans: Acta Mater., 2011, vol. 59, pp. 2156.10.1016/j.actamat.2010.12.016 ↗
20. M. Plapp: Phys. Rev. E, 2011, vol. 84, pp. 031601.10.1103/PhysRevE.84.031601 ↗
21. M. Fleck, F. Querfurth, and U. Glatzel: J. Mater. Res., 2017, vol. 32, pp. 4605–4615.10.1557/jmr.2017.393 ↗
22. D. Siebörger, H Brehm, F. Wunderlich, D. Möller, and U. Glatzel: Zeitschrift für Metallkunde, 2001, vol. 92, pp. 58–61.
23. F. Pyczak, B. Devrient, and H. Mughrabi: Superalloys, 2004, vol. 2004, pp. 827–836.10.7449/2004/Superalloys_2004_827_836 ↗
24. D. Siebörger, H. Knake, and U. Glatzel: Mater. Sci. Eng. A, 2001, vol. 298, pp. 26–33.10.1016/S0921-5093(00)01318-6 ↗
25. U. Glatzel: Microstructure and Internal Strains of Undeformed and Creep Deformed Samples of a Nickel-Base Superalloy Verlag Dr. Köster, Berlin, 1994, pp. 23–25.
26. E. Fleischmann, C. H. Konrad, J. Preußner, R. Völkl, E. Affeldt, and U. Glatzel: Metal. Mater. Trans. A, 2015, vol. 46, pp. 1125.10.1007/s11661-014-2727-x ↗
27. E. Fleischmann, M. K. Miller, E. Affeldt, and U. Glatzel: Acta Mater., 2015, vol. 87, pp. 350.10.1016/j.actamat.2014.12.011 ↗
28. B. Sonderegger and E. Kozeschnik: Metal. Mater. Trans. A, 2009, vol. 40, pp. 499–510.10.1007/s11661-008-9752-6 ↗
29. A. J. Ardell and V. Ozolins: Nature Mater., 2005, vol. 4, pp. 309.10.1038/nmat1340 ↗
30. G. Boussinot, A. Finel, and Y. Le Bouar: Acta Mater., 2009, vol. 57, pp. 921–931.10.1016/j.actamat.2008.10.039 ↗
31. R. D. Schwarze, C. Kamachali, M. Kühbach, M. Mießen, C. Tegeler, L. Barrales-Mora, I. Steinbach, and G. Gottstein: Comp. Mater. Sci., 2018, vol. 147, pp. 204 – 216.10.1016/j.commatsci.2018.02.005 ↗
32. M. Kühbach, G. Gottstein, and L.A. Barrales-Mora: Acta Mater., 2016, vol. 107, pp. 366.10.1016/j.actamat.2016.01.068 ↗
33. K. Harris, G. L. Erickson, S. L. Sikkenga, W. D. Brentnall, J. M. Aurrecoechea, and K. G. Kubarych: J. Mater. Eng. Perform., 1993, vol. 2, pp. 481–487.10.1007/BF02661730 ↗
34. R. Völkl, U. Glatzel, and M. Feller-Kniepmeier: Acta Mater., 1998, vol. 46, pp. 4395.10.1016/S1359-6454(98)00085-8 ↗
35. K. Thornton, N. Akaiwa, and P. W. Voorhees: Acta Mater., 2004, vol. 52, pp. 1353.10.1016/j.actamat.2003.11.037 ↗
36. X. Zhao, R. Duddu, S.P.A. Bordas, and J. Qu: J. Mech. Phys. Solid, 2013, vol. 61, pp. 1433–1445.10.1016/j.jmps.2013.01.012 ↗
37. X. Zhao, S.P.A. Bordas, and J. Qu: J. Mech. Phys. Solid, 2015, vol. 81, pp. 1–21.10.1016/j.jmps.2015.04.008 ↗
38. J.S. Van Sluytman and T.M. Pollock: Acta Mater., 2012, vol. 60, pp. 1771–1783.10.1016/j.actamat.2011.12.008 ↗
39. J. P. MacSleyne, J.P. Simmons, and M. De Graef: Acta Mater., 2008, vol. 56, pp. 427 – 437.10.1016/j.actamat.2007.09.039 ↗
40. J. P. MacSleyne, M. D. Uchic, J. P. Simmons, and M. De Graef: Acta Mater., 2009, vol. 57, pp. 6251 – 6267.10.1016/j.actamat.2009.08.053 ↗