journal article·2018-07

A Finite Element Model to Predict the Effect of Porosity on Elastic Modulus in Low-Porosity Materials

Liam S. Morrissey, Sam Nakhla

Publisher page

Abstract

The effect of porosity on elastic modulus in low-porosity materials is investigated. First, several models used to predict the reduction in elastic modulus due to porosity are compared with a compilation of experimental data to determine their ranges of validity and accuracy. The overlapping solid spheres model is found to be most accurate with the experimental data and valid between 3 and 10 pct porosity. Next, a FEM is developed with the objective of demonstrating that a macroscale plate with a center hole can be used to model the effect of microscale porosity on elastic modulus. The FEM agrees best with the overlapping solid spheres model and shows higher accuracy with experimental data than the overlapping solid spheres model.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Drilling and Well Engineering · Corrosion Behavior and Inhibition · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Y. Liang, D. C. Ahn, P. Sofronis, R. H. Dodds Jr and D. Bammann: Mech. Mater., 2008, vol. 40, pp. 115–32.10.1016/j.mechmat.2007.07.001 ↗
2. M. Nagumo: Mater. Sci. Technol., 2004, vol. 20, pp. 940–50.10.1179/026708304225019687 ↗
3. W. E. Frazier: J. Mater. Eng. Perform., 2014, vol. 23, pp. 1917–28.10.1007/s11665-014-0958-z ↗
4. V. Tvergaard: Int. J. Fract., 1981, vol. 17, pp. 389–407.10.1007/BF00036191 ↗
5. E. Zhang and B. Wang: Int. J. Mech. Sci., 2005, vol. 47, pp. 744–56.10.1016/j.ijmecsci.2004.12.011 ↗
6. J. M. Dewey: J. Appl. Phys., 1947, vol. 18, pp. 578–81.10.1063/1.1697691 ↗
7. A. L. Gurson: J. Eng. Mater. Technol., 1977, vol. 99, pp. 2–15.10.1115/1.3443401 ↗
8. R. A. Hardin and C. Beckermann: Metall. Mater. Trans. A, 2007, vol. 38, pp. 2992–3006.10.1007/s11661-007-9390-4 ↗
9. T. Sumitomo, C. H. Cáceres and M. Veidt: J. Light Metals, 2002, vol. 2, pp. 49–56.10.1016/S1471-5317(02)00013-5 ↗
10. R. L. Coble and W. D. Kingery: J. Am. Ceram. Soc., 1956, vol. 39, pp. 377–85.10.1111/j.1151-2916.1956.tb15608.x ↗
11. S. K. Maiti, L. J. Gibson and M. F. Ashby: Acta Metall., 1984, vol. 32, pp. 1963–75.10.1016/0001-6160(84)90177-9 ↗
12. G. Lu, G. Q. Lu and Z. M. Xiao: J. Porous Mater., 1999, vol. 6, pp. 359–68.10.1023/A:1009669730778 ↗
13. A. Boccaccini, Z. Fan: Ceram. Int., 1997, vol.23, pp. 239–45.10.1016/S0272-8842(96)00033-8 ↗
14. P. Bartowski and S. Spletzer: Army research lab aberdeen proving ground MD, 2001, vol. No. ARL-TR-2606.
15. C. W. Bert: J. Mater. Sci., 1985, vol. 20, pp. 2220–4.10.1007/BF01112307 ↗
16. R. W. Rice: J. Mater. Sci., 2005, vol. 40, pp. 983–9.10.1007/s10853-005-6517-0 ↗
17. A. P. Roberts and E. J. Garboczi: J. Am. Ceram. Soc., 2000, vol. 83, pp. 3041–8.10.1111/j.1151-2916.2000.tb01680.x ↗
18. K. S. Hibbit, Inc.: Abaqus Theory Manual Version 6.5. (2004).
19. R. A. Hardin and C. Beckermann: Proceedings of the 65th SFSA Technical and Operating Conference, 2011.
20. F. P. Knudsen: J. Am. Ceram. Soc., 1962, vol. 45, pp. 94–5.10.1111/j.1151-2916.1962.tb11089.x ↗
21. M. Asmani, C. Kermel, A. Leriche and M. Ourak: J. Eur. Ceram. Soc., 2001, vol. 21, pp. 1081–6.10.1016/S0955-2219(00)00314-9 ↗
22. S. L. Dole, O. Hunter and F. W. Calderwood: J. Am. Ceram. Soc., 1980, vol. 63, pp. 136–9.10.1111/j.1151-2916.1980.tb10677.x ↗
23. K. K. Phani and R. N. Mukerjee: J. Mater. Sci., 1987, vol. 22, pp. 3453–8.10.1007/BF01161441 ↗
24. J. P. Panakkal, H. Willems and W. Arnold: J. Mater. Sci., 1990, vol. 25, pp. 1397–402.10.1007/BF00585456 ↗
25. D. F. Porter, J. S. Reed and D. L. Iii: J. Am. Ceram. Soc., 1977, vol. 60, pp. 345–9.10.1111/j.1151-2916.1977.tb15558.x ↗