The Effects of Antimony Addition on the Microstructural, Mechanical, and Thermal Properties of Sn-3.0Ag-0.5Cu Solder Alloy
Source abstract
Abstract
In this study, we investigated the effects produced by the addition of antimony (Sb) to Sn-3.0Ag-0.5Cu-based solder alloys. Our focus was the alloys’ microstructural, mechanical, and thermal properties. We evaluated the effects by means of scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), differential scanning calorimetry (DSC), and a universal testing machine (UTM). The results showed that a part of the Sb was dissolved in the Sn matrix phase, and the remaining one participated in the formation of intermetallic compounds (IMCs) of Ag3(Sn,Sb) and Cu6(Sn,Sb)5. In the alloy containing the highest wt pct Sb, the added component resulted in the formation of SnSb compound and small particle pinning of Ag3(Sn,Sb) along the grain boundary of the IMCs. Our tests of the Sn-3.0Ag-0.5Cu solder alloys’ mechanical properties showed that the effects produced by the addition of Sb varied as a function of the wt pct Sb content. The ultimate tensile strength (UTS) increased from 29.21 to a maximum value of 40.44 MPa, but the pct elongation (pct EL) decreased from 48.0 to a minimum 25.43 pct. Principally, the alloys containing Sb had higher UTS and lower pct EL than Sb-free solder alloys due to the strengthening effects of solid solution and second-phase dispersion. Thermal analysis showed that the alloys containing Sb had a slightly higher melting point and that the addition amount ranging from 0.5 to 3.0 wt pct Sb did not significantly change the solidus and liquidus temperatures compared with the Sb-free solder alloys. Thus, the optimal concentration of Sb in the alloys was 3.0 wt pct because the microstructure and the ultimate tensile strength of the SAC305 solder alloys were improved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A.A. El-Daly and A.E. Hamdmad: J. Alloys Compd., 2011, vol. 509, pp. 8854–60.
2. S.Y. Chang, C.C. Jain, T.H. Chuang, L.P. Feng, and L.C. Tsao: Mater. Des., 2011, 32: 4720–4727.10.1016/j.matdes.2011.06.044 ↗
3. H.R. Kotadia, O. Mokhtari, M.P. Clode, M.A. Green, and S.H. Mannan: J. Alloys Compd., 2012, vol. 511, pp. 176–88.10.1016/j.jallcom.2011.09.024 ↗
4. A.A. El-Daly, A. Fawzy, A.Z. Mohamad, and A.M. EL-Taher: J. Alloys Compd., 2011, vol. 509, pp. 4574–8210.1016/j.jallcom.2011.01.109 ↗
5. L. Zhang, S.B. Xue, G. Zeng, L.L. Gao, and H. Ye: J. Alloys Compd., 2012, vol. 510, pp. 38–45.10.1016/j.jallcom.2011.08.044 ↗
6. F. Lin, W. Bi, G. JU, W. Wang, and X. Wei: J. Alloys Compd., 2011, vol. 509, pp. 6666–72.10.1016/j.jallcom.2011.03.134 ↗
7. F. Zhu, H. Zhang, R. Guan, and S. Liu: J. Alloys Compd., 2007, vol. 438, pp.100–5.10.1016/j.jallcom.2006.08.009 ↗
8. L. Gao, S. Xue, L. Zhang, Z. Sheng, F. Ji, and W. Dai: Microelectron. Eng., 2010, vol. 87, pp. 2025–34.10.1016/j.mee.2010.04.007 ↗
9. A.K. Gain, Y.C. Chan, and W.K.C. Yung: Microelectron. Reliab., 2011, vol. 51, pp. 975–84.10.1016/j.microrel.2011.01.006 ↗
10. T. Ventura, S. Terzi, M. Rappaz, and A.K. Dahle: Acta Mater., 2011, vol, 59(4), pp. 1651–58.10.1016/j.actamat.2010.11.032 ↗
11. R. Mahmudi and S. Mahin-Shirazi: Mater. Des., 2011, vol. 32, pp. 5027–32.10.1016/j.matdes.2011.05.052 ↗
12. B.L. Chen and G.Y. Li: Thin Solid Films, 2004, vol. 462-463, pp. 395–401.10.1016/j.tsf.2004.05.063 ↗
13. B.L. Chen and G.Y. Li: IEEE Trans. Compon. Packag. Technol., 2005, vol. 28(3), pp. 534–41.10.1109/TCAPT.2005.848573 ↗
14. G.Y. Li, B.L. Chen, and J.N. Tey: IEEE Trans. Compon. Packag. Technol., 2004, vol. 27, pp. 77–85.
15. H.T. Lee, S.Y. Hu, T.F. Hong, and Y.F. Chen: J. Electron. Mater., 2008, vol. 37(6), pp. 867–73.10.1007/s11664-008-0396-5 ↗
16. C.A. Handwerker, U. Kattner and K.W. Moon: Lead-Free Soldering, 1st ed., Springer US, 2007, p. 33.
17. H.T. Lee, M.H. Chen, H.M. Jao and C.J. Hsu: J. Electron. Mater., 2004, vol. 33(9), pp. 1048–1054.10.1007/s11664-004-0034-9 ↗
18. I.E. Anderson, J.C. Foley, B.A. Cook, J.L. Harringa, R.L. Terpstra and O. Unal: J. Electron. Mater., 2001, vol. 30, pp. 1050–1059.10.1007/s11664-001-0129-5 ↗
19. K.W. Moon, W.J. Boettinger, U.R. Kattner, F.S. Biancaniello and C.A. Handwerker: J. Electron. Mater., 2000, vol. 29(10), pp. 1122–1136.10.1007/s11664-000-0003-x ↗
20. A.A. El-Daly, A.E. Hammad, A. Fawzy, and D.A. Nasrallh: Mater. Des., 2013, vol. 43, pp. 40–49.10.1016/j.matdes.2012.06.058 ↗
21. G.Y. Li, B.L. Chen, Z.Q. Shi, C.K. Stephen, and Z.F. Wang: Thin Solid Films, 2006, vol. 504, pp. 421–5.10.1016/j.tsf.2005.09.060 ↗
22. K.S. Kim, S.H. Huh and K. Suganuma: Microelectron. Reliab., 2003, vol. 43(2), pp. 259–267.10.1016/S0026-2714(02)00239-1 ↗
23. V.L. Nguyen, C.S. Chung and H.K. Kim: Microelectron. Reliab., 2015, vol. 55, pp. 2808–2816.10.1016/j.microrel.2015.10.002 ↗
24. A.B. El Basaty, A.M. Deghady and E.A. Eid: Mater. Sci. Eng. A, 2017, vol. 701, pp. 245–253.10.1016/j.msea.2017.06.092 ↗
25. B.L. Chen and G.Y. Li: Proc. Electron. Compon. Technol., Louisiana, 2003, pp. 1235–42.
26. K. Kanlayasiri, M. Mongkolwongrojn, and T. Ariga: J. Alloys Compd., 2009, vol. 485, pp. 225–30.10.1016/j.jallcom.2009.06.020 ↗
27. A.A. El-Daly, F. El-Tantawy, A.E. Hammad, M.S. Gaafar, E.H. El-Mossalamy, and A.A. Al-Ghamdi: J. Alloys Compd., 2011, vol. 509, pp. 7238–46.10.1016/j.jallcom.2011.01.062 ↗
28. A. Fawzy, S.A. Fayek, M. Sobhy, E. Nassr, M.M. Mousa, and G. Saad: Mater. Sci. Eng. A, 2014, vol. 603, pp. 1–10.10.1016/j.msea.2014.02.061 ↗
29. Z.B. Luo, J. Zhao, Y.J. Gao and L. Wang: J. Alloys Compd., 2010, vol. 500, pp. 39–45.10.1016/j.jallcom.2010.03.191 ↗
30. L.W Lin, J.M. Song, Y.S. Lai, Y.T. Chiu, N.C. Lee and J.Y. Uan: Microelectron. Reliab., 2009, vol. 49, pp. 235–241.10.1016/j.microrel.2008.10.001 ↗
31. A.A. El-Daly, Y. Swilem, and A.E. Hammad: J. Alloys Compd., 2009, vol. 471, pp. 98–104.10.1016/j.jallcom.2008.03.097 ↗
32. A.A. El-Daly and A.E. Hammad: J. Alloys Compd., 2010, vol. 505, pp. 793–800.10.1016/j.jallcom.2010.06.142 ↗