journal article·2017-09Open access

Morphology of Upper and Lower Bainite with 0.7 Mass Pct C

Jiaqing Yin, Mats Hillert, Annika Borgenstam

Abstract

Abstract There has been an on-going discussion on the difference in formation mechanisms of upper and lower bainite. Various suggestions have been supported by reference to observed morphologies and illustrated with idealized sketches of morphologies. In order to obtain a better basis for discussions about the difference in mechanism, the morphology of bainite in an Fe-C alloy with 0.7 mass pct carbon was now studied in some detail from 823 K to 548 K (550 °C to 275 °C) at temperature intervals of 50 K or less. The work focused on bainite seen to start from a grain boundary in the plane of polish and showing an advancing tip in the remaining austenite. The results indicate that there is no essential difference with temperature regarding the ferritic skeleton of feathery bainite. The second stage of bainite formation, which involves the formation of both ferrite and cementite, was regarded as a eutectoid transformation and the resulting morphologies were analyzed in terms of two modes, degenerate and cooperative eutectoid transformation. There was no sharp difference between upper and lower bainite. Ways to define the difference were discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. R.F. Mehl: Hardenability of Alloy Steels, ASM, Metals Park, OH, 1939, pp. 41-44.
2. A. Hultgren: Trans. ASM, 1947, vol. 39, pp. 915-89
3. H.I. Aaronson and C. Wells: Trans. AIME, 1956, vol. 206, pp. 1216-23.
4. M. Hillert: Jernkont. Ann., 1957, vol. 147, pp. 757-89.
5. T. Ko and S. A. Cottrell: J. Iron. Steel Inst., 1952, vol. 172, pp. 307-13.
6. S.J. Matas and R.F. Hehemann: Trans. AIME, 1961, vol. 221, pp. 179-85.
7. R.H. Goodenow, S.J. Matas and R.F. Hehemann: Trans. AIME, 1963, vol. 227, pp. 651-658.
8. L. Kaufman, S.V. Radcliffe, and M. Cohen: Decomposition of Austenite by Diffusional Processes, V.F. Zackay and H.I. Aaronson, eds., Interscience, New York, 1962, pp. 313–52.
9. K. Tsuya: J. Mech. Eng. Lab. Jpn., 1956, vol. 2, p. 20.
10. M. Hillert: “The Growth of Ferrite, Bainite and Martensite”, Internal Report, Swedish Inst. Metal Res., Stockholm, 1960, Printed in Thermodynamics and Phase Transformations, The Selected Works of Mats Hillert, J. Ågren, Y. Bréchet, C. Hutchinson, J. Philibert, and G. Purdy, eds., EPD Sci., Les Ulis Cedex, 2006, pp. 111–58.
11. R.H. Goodenow and R.F. Hehemann: Trans. AIME, 1965, vol. 233, pp. 1777-86.
12. J.M. Oblak and R.F. Hehemann: Transformations and Hardenability in Steels, Climax Molybdenum Co., Ann Arbor, MI, 1967, pp. 15-38.
13. Y. Ohmori, H. Ohtani, and T. Kunitake: Trans. ISIJ, 1971, vol. 11, pp. 250-59.10.2355/isijinternational1966.11.250 ↗
14. M. Takahashi, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1990, vol. 6, pp. 592-603.10.1179/mst.1990.6.7.592 ↗
15. J. Yin, M. Hillert, and A. Borgenstam: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 1425-43.10.1007/s11661-016-3903-y ↗
16. S.B. Singh: Phase Transformation in Steels, E. Pereloma and D.V. Edmonds, eds., Woodhead Publishing, Oxford, 2012, pp. 385–416.10.1533/9780857096104.3.385 ↗
17. J. Yin, M. Hillert, and A. Borgenstam: Metall. and Mat. Trans. A, 2017, vol. 48A, pp. 1444-58.10.1007/s11661-016-3902-z ↗
18. A. Stormvinter, A. Borgenstam and J. Ågren: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3870-79.10.1007/s11661-012-1171-z ↗
19. I. Gutierrez-Urrutia, S. Zaefferer and D. Raabe: JOM, 2013, vol. 65, pp. 1229-36.10.1007/s11837-013-0678-0 ↗
20. S. Zaefferer and N. Elhami: Acta Mater., 2014, vol. 75, pp. 20-50.10.1016/j.actamat.2014.04.018 ↗
21. Y. N. Picard, M. Liu, J. Lammatao, R. Kamaladasa and M. De Graef: Ultramicroscopy, 2014, vol. 146, pp. 71-78.10.1016/j.ultramic.2014.07.006 ↗
22. H.E. Exner: Metallography and Microstructures, ASM International, Materials Park, Ohio, 2004 .
23. P. Morin, M. Pitaval, D. Besnard, and G. Fontaine: Philos. Mag. A, 1979, vol. 40, pp. 511-24.10.1080/01418617908234856 ↗
24. 24. S. Zaefferer: J. Appl. Cryst., 2000, vol. 33, pp. 10-25.10.1107/S0021889899010894 ↗
25. S. Zaefferer: Adv. Imag. Electron Phys., 2002, vol. 125, pp. 355-414.10.1016/S1076-5670(02)80019-2 ↗
26. M. Hillert: The Decomposition of Austenite by Diffusional Processes, V.F. Zackay and H.I Aaronson, eds., Interscience, New York, 1962, pp. 197–237.
27. H. Okamoto and M. Oka: Metall. Trans. A, 1986, vol. 17, pp. 1113-20.10.1007/BF02665309 ↗
28. M. Nemoto: High Voltage Electron Microscopy, P. R. Swann, C. J. Humphrey, and M. J. Goringe, eds., Academic Press, London, 1974, pp. 230–34.
29. H.K.D.H. Bhadeshia and D.V. Edmonds: Acta Metall., 1980, vol. 28, pp. 1265-73.10.1016/0001-6160(80)90082-6 ↗
30. H.K.D.H. Bhadeshia: Solid-Solid Phase Transformation 1981, H. I. Aaroson, D. E. Laughlin, R. F. Sekerka, C. M. Wayman eds., TMS-AIME, Pittsburgh, 1981, pp. 1041–48.
31. P. Kolmskog, A. Borgenstam, M. Hillert, P. Hedström, S. Babu, H. Terasaki, and Y. Komizo: Metall. Mat. Trans. A, 2012, vol. 43A, pp. 4984-88.10.1007/s11661-012-1342-y ↗
32. X.L. Wan, R. Wei, L. Cheng, M. Enomoto, and Y. Adachi: J. Mater. Sci., 2013, vol. 48, pp. 4345-55.10.1007/s10853-013-7250-8 ↗
33. L. Cheng, K.M. Wu, X.L. Wan, and R. Wei: Mater. Charact., 2014, vol. 87, pp. 86-9410.1016/j.matchar.2013.11.002 ↗
34. Z.W. Hu, G.Xu, H.J. Hu, L. Wang, and Z.L. Xue: Int. J. Miner. Metall. and Mater., 2014, vol. 21. pp. 371-78.10.1007/s12613-014-0918-5 ↗
35. F.G. Caballero, M.K. Miller, and C. Garcia-Mateo: Acta Mater., 2010, vol. 58, pp. 2338-43.10.1016/j.actamat.2009.12.020 ↗
36. F.G. Caballero, M.K. Miller, C. Garcia-Mateo, J. Cornide, and M.J. Santofimia: Scripta Mater., 2012, vol. 67, pp. 846-49.10.1016/j.scriptamat.2012.08.007 ↗
37. F.G. Caballero, M.K. Miller, C. Garcia-Mateo, and J. Cornide: J. Alloys Compd., 2013, vol. 577(Suppl. 1), pp. S626–30.10.1016/j.jallcom.2012.02.130 ↗
38. A. Borgenstam, M. Hillert, and J. Ågren: Acta Mater., 2009, vol. 57, pp. 3242-52.10.1016/j.actamat.2009.03.026 ↗
39. F.B. Pickering: Transformations and Hardenability in Steels, Climax Molybdenum Co., Ann Arbor, MI, 1967, pp. 109-29.
40. M. Oka and H. Okanoto: J. Phys. IV Fr., 1995, vol. 5, pp. C8-503–08.
41. J.R. Vilella: Trans. AIME, 1940, vol. 140, pp. 332-34.
42. T.G. Nilan: Transformarion and Hardenability in Steels, Climax Molybdenum Co., Ann Arbor, MI, 1967, pp. 57-66.
43. H. Modin and S. Modin: Jernkont. Ann., 1955, vol. 39, pp. 481-515.