journal article·2017-09

Cellular Automaton Study of Hydrogen Porosity Evolution Coupled with Dendrite Growth During Solidification in the Molten Pool of Al-Cu Alloys

Cheng Gu, Yanhong Wei, Fengyi Yu, Xiangbo Liu, Lvbo She

Publisher page

Abstract

Welding porosity defects significantly reduce the mechanical properties of welded joints. In this paper, the hydrogen porosity evolution coupled with dendrite growth during solidification in the molten pool of Al-4.0 wt pct Cu alloy was modeled and simulated. Three phases, including a liquid phase, a solid phase, and a gas phase, were considered in this model. The growth of dendrites and hydrogen gas pores was reproduced using a cellular automaton (CA) approach. The diffusion of solute and hydrogen was calculated using the finite difference method (FDM). Columnar and equiaxed dendrite growth with porosity evolution were simulated. Competitive growth between different dendrites and porosities was observed. Dendrite morphology was influenced by porosity formation near dendrites. After solidification, when the porosities were surrounded by dendrites, they could not escape from the liquid, and they made pores that existed in the welded joints. With the increase in the cooling rate, the average diameter of porosities decreased, and the average number of porosities increased. The average diameter of porosities and the number of porosities in the simulation results had the same trend as the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Nanoporous metals and alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. F. Li, J. Zhang, Q. Dong, Y. Dai, Y. Fu, H. Xie, J. Mi, F. Yin and B. Sun: Mater. Charact., 2015, vol. 109, pp. 9-18.10.1016/j.matchar.2015.09.008 ↗
2. W. Meng, Z. Li, F. Lu, Y. Wu, J. Chen and S. Katayama: J. Mater. Process. Technol., 2014, vol. 214, pp. 1658-64.10.1016/j.jmatprotec.2014.03.011 ↗
3. J. L. Huang, N. Warnken, J. Gebelin, M. Strangwood and R. C. Reed: Acta Mater., 2012, vol. 60, pp. 3215-25.10.1016/j.actamat.2012.02.035 ↗
4. D. Fuloria and P. D. Lee: Acta Mater., 2009, vol. 57, pp. 5554-62.10.1016/j.actamat.2009.07.051 ↗
5. W. D. Griffiths and R. Raiszadeh: J. Mater. Sci., 2009, vol. 44, pp. 3402-07.10.1007/s10853-009-3450-7 ↗
6. J. Valloton, D. M. Herlach and H. Henein: IOP Conf. Ser. Mater. Sci. Eng., 2016, vol. 117, pp. 12055-58.10.1088/1757-899X/117/1/012058 ↗
7. W. Tao, Z. Yang, Y. Chen, L. Li, Z. Jiang and Y. Zhang: Opt. Laser Technol., 2013, vol. 52, pp. 1-09.10.1016/j.optlastec.2013.04.003 ↗
8. Z. Boukha, J. Maria Sanchez-Amaya, L. Gonzalez-Rovira, E. Del Rio, G. Blanco and J. Botana: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5711-23.10.1007/s11661-013-1953-y ↗
9. W. Wang, S. Luo and M. Zhu: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 1339-54.10.1007/s11661-015-3304-7 ↗
10. W. Wang, S. Luo and M. Zhu: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 1355-66.10.1007/s11661-015-3305-6 ↗
11. L. Du and R. Zhang: Metall. Mater. Trans. B, 2014, vol. 45B, pp. 2504-15.10.1007/s11663-014-0161-5 ↗
12. D. Tourret and A. Karma: Acta Mater., 2015, vol. 82, pp. 64-83.10.1016/j.actamat.2014.08.049 ↗
13. W. Tan and Y. C. Shin: Comput. Mater. Sci., 2015, vol. 98, pp. 446-58.10.1016/j.commatsci.2014.10.063 ↗
14. M. Rappaz and C. A. Gandin: Acta Metall. Mater., 1993, vol. 41, pp. 345-60.10.1016/0956-7151(93)90065-Z ↗
15. J. A. Spittle and S. G. R. Brown: J. Mater. Sci., 1995, vol. 30, pp. 3989-94.10.1007/BF00360698 ↗
16. L. Nastac: Acta Mater., 1999, vol. 47, pp. 4253-62.10.1016/S1359-6454(99)00325-0 ↗
17. X. Zhan, Y. Wei and Z. Dong: J. Mater. Process. Technol., 2008, vol. 208, pp. 1-08.10.1016/j.jmatprotec.2007.12.130 ↗
18. H. Zhang and Q. Xu: J. Mater. Process. Technol., 2016, vol. 238, pp. 132-41.10.1016/j.jmatprotec.2016.07.013 ↗
19. S. Pan and M. Zhu: Acta Mater., 2010, vol. 58, pp. 340-52.10.1016/j.actamat.2009.09.012 ↗
20. R. C. Atwood and P. D. Lee: Acta Mater., 2003, vol. 51, pp. 5447-66.10.1016/S1359-6454(03)00411-7 ↗
21. M. Zhu, Z. Li, D. An, Q. Zhang and T. Dai: ISIJ Int., 2014, vol. 54, pp. 384-91.10.2355/isijinternational.54.384 ↗
22. W. Wu, M.F. Zhu, D.K. Sun, T. Dai, Q.Y. Han, and D. Raabe: MCWASP XIII: International Conference on Modeling of Casting, Welding and Advanced Solidification Processes, 2012, vol. 33, p. 012103.10.1088/1757-899X/33/1/011001 ↗
23. D. Sun, M. Zhu, J. Wang and B. Sun: Int. J. Heat Mass Transf., 2016, vol. 94, pp. 474-87.10.1016/j.ijheatmasstransfer.2015.11.079 ↗
24. C. Gu, Y. Wei, X. Zhan and Y. Li: Sci. Technol. Weld. Join., 2016, vol. 22, pp. 47-58.10.1080/13621718.2016.1183962 ↗
25. K. J. Song, Y. H. Wei, Z. B. Dong, R. Ma, X. H. Zhan, W. J. Zheng and K. Fang: Model. Simul. Mater. Sci., 2014, vol. 22, pp. 15006.10.1088/0965-0393/22/1/015006 ↗
26. X. H. Zhan, Z. B. Dong, Y. H. Wei and R. Ma: J. Cryst. Growth, 2009, vol. 311, pp. 4778-83.10.1016/j.jcrysgro.2009.09.008 ↗
27. R. Ma, Z. Dong, Y. Wei, X. Zhan, and Y. Wang: Cryst. Res. Technol., 2010, vol. 44, pp. 1197–204.10.1002/crat.200900398 ↗
28. H. B. Dong and P. D. Lee: Acta Mater., 2005, vol. 53, pp. 659-68.10.1016/j.actamat.2004.10.019 ↗
29. K. Li and E. Chang: Acta Mater., 2004, vol. 52, pp. 219-31.10.1016/j.actamat.2003.09.007 ↗