Weibull Analysis of Mechanical Data for Castings II: Weibull Mixtures and Their Interpretation
Source abstract
Abstract
The interpretation of Weibull probability plots of mechanical testing data from castings was discussed in Part 1 (M. Tiryakioglu, J. Campbell: Metall. Mater. Trans. A, 41 (2010) 3121-3129). In Part II, details about the mathematical models of Weibull mixtures are introduced. The links between the occurrence of Weibull mixtures and casting process parameters are discussed. Worked examples are introduced in five case studies in which six datasets from the literature were reanalyzed. Results show that tensile and fatigue life data should be interpreted differently. In tensile data, Weibull mixtures are due to two distinct defect distributions, namely “old” and “young” bifilms, which are a result of prior processing and mold filling, respectively. “Old” bifilms are the predominant defect and result in the lower distribution, whereas “young” bifilms results on the upper distribution. In fatigue life data, Weibull mixtures are due to two failure mechanisms being active: failure due to cracks initiating from surface defects and interior defects. Surface defects are predominant and interior defects lead to fatigue failure only when there are no cracks initiated by surface defects. In all cases, only the mutually exclusive Weibull mixture model was found to be applicable.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Fatigue and fracture mechanics · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. A.A. Griffith: Phil. Trans. Royal Soc. London. Ser. A, 1921, vol. 221, pp. 163-198.10.1098/rsta.1921.0006 ↗
2. P.F. Thomason: Ductile Fracture of Metals, Pergamon Press, Oxford, UK, 1990.
3. J.F. Knott: in Recent Advances in Fracture, R.K. Mahidhara, ed., TMS, Warrendale, PA, 1997.
4. B. Epstein: J. American Stat. Assoc. 1948, vol. 43, pp. 403-412.10.1080/01621459.1948.10483270 ↗
5. F. T. Pierce: J. Textile Inst. 1926, vol. 17, pp. T355-T368.10.1080/19447027.1926.10599953 ↗
6. T.T. Shih: Eng. Frac. Mech., 1980, vol. 13, pp. 257-271.10.1016/0013-7944(80)90058-2 ↗
7. W. Weibull: J. Applied Mechanics, 1951, vol. 13, 293-297.10.1115/1.4010337 ↗
8. N.R. Green, J. Campbell: Mater. Sci. Eng. A, 1993, vol. A173, pp. 261-266.10.1016/0921-5093(93)90226-5 ↗
9. N.R. Green, J. Campbell: AFS Trans. 1994, vol. 102, pp. 341-347.
10. M. Tiryakioǧlu, J. Campbell: Metall. Mater. Trans. A, 2010, vol. 41, pp. 3121-3129.10.1007/s11661-010-0364-6 ↗
11. S. Jiang, D. Keçecioğlu, IEEE Trans on Reliability, 1992, vol. 41, pp. 241-247.10.1109/24.257789 ↗
12. M. Cox, M. Wickins, J. P. Kuang, R. A. Harding, J. Campbell: Mater. Sci. Technol. 2000, vol. 16, pp. 1445-1452.10.1179/026708300101507442 ↗
13. W. Weibull: Proc. The Royal-Swedish Institute for Engineering Research. Nr. 151, 1939.
14. E.S. Pearson: “The Application of Statistical Methods to Industrial Standardisation and Quality Control”, British Standard No. 600, 1935.
15. W. Weibull: The Phenomenon of Rupture in Solids, Royal Swedish Institute of Engineering Research (Ingenioersvetenskaps Akad. Handl.), Stockholm, vol. 153, pp. 1–55, 1939.
16. C. A. Johnson: Frac. Mech. Ceram. 1983, vol. 5, pp. 365-386.10.1007/978-1-4613-3488-0_23 ↗
17. C.D. Tarum: SAE Technical Paper, 1999-01-0055, 1999.
18. J. Campbell: Castings, 2nd ed., Elsevier, Oxford, 2003.
19. J. Campbell: Mater. Sci. Technol., 2006, vol. 22, pp. 127–45, 999–1008.10.1179/174328406X109221 ↗
20. C. Nyahumwa, N. R. Green, J. Campbell; Metall. Mater. Trans. A, 2001, vol. 32A, pp. 349–358.10.1007/s11661-001-0266-8 ↗
21. Q. G. Wang, C. Davidson, J. Griffiths, P. Crepeau; Metall. Mater. Trans. B, 2006, vol. 37B, pp. 887–895.10.1007/BF02735010 ↗
22. C. Nyahumwa, N. R. Green, J. Campbell, AFS Trans., 1998, vol. 106, pp. 215-223.
23. B. Zhang, D. R. Poirier, W. Chen; Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2659-2666.10.1007/s11661-999-0306-3 ↗
24. G. Eisaabadi B. P.Davami, S.K.Kim, M.Tiryakioğlu: Materials Science and Engineering A, 2013, vol. 579, pp. 64-70.10.1016/j.msea.2013.05.014 ↗
25. Q.G. Wang, D. Apelian, D.A. Lados: J. Light Metals, 2001, vol. 1, pp. 73-84.10.1016/S1471-5317(00)00008-0 ↗
26. J. Campbell, M. Tiryakioǧlu: Metall. Mater. Trans. B, 2012, vol. 43B, pp. 902-914.10.1007/s11663-012-9655-1 ↗
27. A.K.M.B. Rashid, J. Campbell: Metall. Mater. Trans. A. 2004, vol. 35A, pp. 2063-2071.10.1007/s11661-004-0155-z ↗
28. K. M. Gruenberg, B. A. Craig, B. M. Hillberry, R. J. Bucci, A. J. Hinkle: Intl. J. Fatigue, 2004, vol. 26, pp. 615–627.10.1016/j.ijfatigue.2003.10.010 ↗
29. M. Tiryakioğlu: Mater. Sci. Eng. A 2010, vol. A527, pp. 4546-4549.10.1016/j.msea.2010.03.109 ↗
30. A. Ardekhani, R. Raiszadeh: J. Mater. Eng. Perform., 2012, vol. 21, 1352-1362.10.1007/s11665-011-9991-3 ↗
31. J.T. Staley, Jr., M. Tiryakioğlu, J. Campbell: Mater. Sci. Eng. A, 2007, vol. 460-461, pp. 324-334.10.1016/j.msea.2007.01.049 ↗
32. M. Cox, R. A. Harding, J. Campbell: Mater. Sci. Technol. 2003, vol. 19, pp. 613-625.10.1179/026708303225002028 ↗
33. D.Z. Li, J. Campbell, Y.Y. Li: J. Mater. Process. Technol., 2004, vol. 148, pp. 310–316.10.1016/j.jmatprotec.2004.02.032 ↗
34. P. Paris, F. Erdoğan. J Basic Eng, 1963, vol. 85, pp. 528-534.10.1115/1.3656900 ↗
35. M.A. Przystupa, R.J. Bucci, P.E. Magnusen, A.J. Hinkle: Intl. J. Fatigue, 1997, vol. 19, pp. S285-288.10.1016/S0142-1123(97)00026-1 ↗
36. M.J. Couper, A,E. Neeson, J.R. Griffths: Fatigue Frac Eng Mater Struct 1990, vol. 13, pp. 213-227.10.1111/j.1460-2695.1990.tb00594.x ↗
37. C.J. Davidson, J.R. Griffiths, A.S. Machin. Fatigue Frac Eng Mater Struct 2002, vol. 25, pp. 223-230.10.1046/j.8756-758x.2001.00490.x ↗
38. M. Tiryakioğlu, Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1623-1630.10.1007/s11661-009-9847-8 ↗
39. Y. Murakami, M. Endo. Int J Fatigue, 1994, vol. 16, pp. 163-182.10.1016/0142-1123(94)90001-9 ↗
40. Y Murakami: JSME Int J 1989, vol. 32, pp. 167-180.
41. S. Beretta, Y. Murakami: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 517-523.10.1007/s11663-001-0036-4 ↗
42. J. T. Staley, Jr., M. Tiryakioğlu, J. Campbell: Mater. Sci. Eng. A, 2007, vol. 465, pp. 136-145.10.1016/j.msea.2007.02.009 ↗
43. O. Umezawa, K. Nagai and K. Ishikawa: Tetsu to Hagane, 1989, vol. 75, pp. 159-166.10.2355/tetsutohagane1955.75.1_159 ↗
44. H. Mughrabi: Fatigue and Fracture of Eng. Mater. Structures, 2002, vol. 25, pp. 755-764.10.1046/j.1460-2695.2002.00550.x ↗
45. K. Sadananda, A.K. Vasudevan, N. Phan: Intl. J. Fatigue, 2007, vol. 29, pp. 2060–2071.10.1016/j.ijfatigue.2007.02.028 ↗
46. C. Przybyla, R. Prasannavenkatesan, N. Salajegheh, D. L. McDowell: Intl. J. Fatigue, 2010, vol. 32, pp. 512–525.10.1016/j.ijfatigue.2009.03.021 ↗
47. Y. Nakamura, T. Sakai, H. Hirano, K.S. Ravi Chandran: Intl. J. Fatigue, 2010, vol. 32, pp. 621–626.10.1016/j.ijfatigue.2009.10.002 ↗
48. C. Bathias: Fatigue Fract Engng Mater Struct., 1999, vol. 22, pp. 559–565.10.1046/j.1460-2695.1999.00183.x ↗
49. Q. Y. Wang, J. Y. Berard, A. Dubarre, G. Baudry, S. Rathery, C. Bathias: Fatigue Fract. Eng. Mater. Struct., 1999, vol. 22, pp. 667–672.10.1046/j.1460-2695.1999.t01-1-00185.x ↗
50. O. Umezawa, K. Nagai: ISIJ International, 1997, vol. 37, pp. 1170-1179.10.2355/isijinternational.37.1170 ↗
51. B. Skallerud, T. Iveland, G. Härkegård: Eng. Fracture Mech., 1993, vol. 44, pp. 857-874.10.1016/0013-7944(93)90108-5 ↗
52. S.A. Barter, L. Molent, N. Goldsmith, R. Jones: J. Eng. Failure Analysis, 2005, vol. 12, pp. 99-128.10.1016/j.engfailanal.2004.04.002 ↗
53. B.R. Crawford, C. Loader, A.R. Ward, C. Urbani, M.R. Bache, S.H. Spence, D.G. Hay, W.J. Evans, G. Clark, A.J. Stonham: Fatigue Fract. of Eng. Mater. Struc., 2005, vol. 28, pp. 795-808.10.1111/j.1460-2695.2005.00912.x ↗
54. C. Nyahumwa, N.R. Green, and J. Campbell: J. Mechanical Behavior of Materials, 1998, vol. 9, pp. 227-235.10.1515/JMBM.1998.9.4.227 ↗
55. M. Tiryakioğlu, J. Campbell, C. Nyahumwa: Metall. Mater. Trans. B., 2011, vol.42, pp.1098-1103.10.1007/s11663-011-9577-3 ↗
56. C.W.M. Nyahumwa: Ph.D. Thesis, University of Birmingham, U.K., 1997.
57. B. Sirrell, J. Campbell: AFS Trans., 1997, vol. 105, pp 645-654.
58. M. Tiryakioǧlu: Mater. Sci. Eng. A, 2014, vol. A601, pp. 116–122.10.1016/j.msea.2014.02.033 ↗