Long-Term Creep-Rupture Behavior of Alloy Inconel 740/740H
Source abstract
Abstract
To explore potential application of Ni-based alloys for power generation at the higher temperatures and pressures needed to achieve high thermal to electrical-energy conversion efficiency, an extensive creep-rupture dataset covering up to 875 °C and almost 70,000 hours for Inconel 740/740H was analyzed using Larson–Miller parameter and Wilshire approaches. The results were used to assess the relative effectiveness of the two analytical methods, both in describing the experimental data and, because of the breadth of the dataset, using analyses of its shorter-time data to make creep lifetime predictions for much more extended times, which were then directly compared to the measured rupture times. The respective methods were also used to predict creep-limited lifetimes relevant to power production (that is, 100,000 hours or greater). Despite the complexity of the precipitation-strengthened Inconel 740/740H alloy and the generalized parametric approach of these methodologies, the predictions based on such were reasonably accurate when the entire dataset was analyzed. However, when the analysis was confined to only data for conditions yielding creep-rupture times < 5000 hours (about 65 pct of the entire dataset), the Wilshire correlation yielded better prediction for longer time lifetimes due to the inherent instability of the specific Larson–Miller formalism used in this analysis when extrapolated significantly outside its analysis range.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. S. Zhao, X. Xie, G. D. Smith, and S. J. Patel: Mater. Sci. Eng. A, 2003, vol. 355(1-2), pp. 96-105.10.1016/S0921-5093(03)00051-0 ↗
2. S. J. Patel: Acta Metall. Sinica Engl. Lett., 2005, vol. 18(4), pp. 479-488.
3. J. deBarbadillo and A. Di Gianfrancesco: Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants: INCONEL alloy 740H, 1st ed., Woodhead Publishing, 2017, pp. 469–510.10.1016/B978-0-08-100552-1.00014-2 ↗
4. R. Viswanathan, J. Henry, J. Tanzosh, G. Stanko, J. Shingledecker, B. Vitalis, and R. Purgert: J. Mater. Eng. Perform., 2005, vol. 14(3), pp. 281-292.10.1361/10599490524039 ↗
5. B. D. Iverson, T. M. Conboy, J. J. Pasch, and A. M. Kruizenga: Appl. Energy, 2013, vol. 111, pp. 957-970.10.1016/j.apenergy.2013.06.020 ↗
6. R. Sun, Z. Cui, and Y. Tao: Advances in Materials Technology for Fossil Power Plants: Proc. Seventh International Conference, 2014, pp. 1–8.
7. M. Fukuda, E. Saito, H. Semba, J. Iwasaki, S. Izumi, S. Takano, T. Takahashi, and Y. Sumiyoshi: Advances in Materials Technology for Fossil Power Plants: Proc. Seventh International Conference, 2014, pp. 24–40.
8. M. Mecheri and Y. Le Moullec: Energy, 2016, vol. 103, pp. 758-771.10.1016/j.energy.2016.02.111 ↗
9. R. Purgert, J. Shingledecker, J. Pschirer, R. Ganta, P. Weitzel, J. Sarver, B. Vitalis, M. Gagliano, G. Stanko, and P. Tortorelli: DOE-EIO-EPRI-01NT41175, United States (OSTI.gov), December 2015.
10. B. Baker and R. Gollihue: Advances in Materials Technology for Fossil Power Plants: Proc. Sixth International Conference, 2011, pp. 96–109.
11. C. J. Cowen, P. E. Danielson, and P. D. Jablonski: J. Mater. Eng. Perform., 2011, vol. 20(6), pp. 1078-1083.10.1007/s11665-010-9731-0 ↗
12. X. Xie, C. Chi, Q. Yu, Z. Yao, M. Zhang, Y. Hu, J. Dong, H. Yu, S. Zhao, F. Lin, X. Liu, L. Mei, H. Yang, and M. Li: Advances in Materials Technology for Fossil Power Plants: Proc. Seventh International Conference, 2014, pp. 98–119.
13. S. Zhang and Y. Takahashi: Advances in Materials Technology for Fossil Power Plants: Proc. Seventh International Conference, 2014, pp. 242–253.
14. F. Abe: Engineering, 2015, vol. 1(2), pp. 211-224.10.15302/J-ENG-2015031 ↗
15. R. Viswanathan, J. Shingledecker, and R. Purgert: Power, 2010, vol. 154(8), pp. 41-45.
16. S. J. Patel, J. J. DeBarbadillo, B. A. Baker, and R. D. Gollihue: Procedia Eng., 2013, vol. 55, pp. 246-252.10.1016/j.proeng.2013.03.250 ↗
17. J. deBarbadillo, B. Baker, and X. Xie: Superalloys 2016: Proc. 13th Intenational Symposium on Superalloys, 2016, pp. 217–26.10.1002/9781119075646.ch24 ↗
18. M. Hardy, M. Detrois, E. McDevitt, C. Argyrakis, V. Saraf, P. Jablonski, J. Hawk, R. Buckingham, H. Kitaguchi, and S. Tin: Metall. Mater. Trans. A, 2020, vol. 51(6), pp. 2626-2650.10.1007/s11661-020-05773-6 ↗
19. M. Evans: Metall. Mater. Trans. A, 2013, vol. 44(1), pp. 109-127.10.1007/s11661-012-1293-3 ↗
20. F. R. Larson and J. Miller: Trans. ASME, 1952, vol. 74, pp. 765-775.
21. B. Wilshire and A. Battenbough: Mater. Sci. Eng. A, 2007, vol. 443(1-2), pp. 156-166.10.1016/j.msea.2006.08.094 ↗
22. J. P. Shingledecker and G. M. Pharr: Metall. Mater. Trans. A, 2012. vol. 43(6), pp. 1902-1910.10.1007/s11661-011-1013-4 ↗
23. J. Shingledecker, N. Evans, and G. Pharr: Mater. Sci. Eng. A, 2013, vol. 578, pp. 277-286.10.1016/j.msea.2013.04.087 ↗
24. PF. Tortorelli, K.A. Unocic, H. Wang, M.L. Santella, and J. Shingledecker: Advances in Materials Technology for Fossil Power Plants: Proc. Seventh International Conference, 2014, pp. 131–42.
25. P.F. Tortorelli, H. Wang, K.A. Unocic, M.L. Santella, J.P. Shingledecker, and V. Cedro III: ASME 2014 Symposium on Elevated Temperature Application of Materials for Fossil, Nuclear, and Petrochemical Industries, 2014, pp. 29–36.
26. V. Cedro, C. Garcia, and M. Render: Materials, 2018, vol. 11(9), p. 1585.10.3390/ma11091585 ↗
27. R. Swindeman, M. Swindeman, B. Roberts, B. Thurgood, and D. Marriott: DOE/ID14712-1, United States (OSTI.gov), November 2007.
28. M. S. Haque and C. M. Stewart: J. Pressure Vessel Technol., 2020, vol. 142(3), p. 031504.10.1115/1.4045887 ↗
29. F. C. Monkman and N. J. Grant: Proc. ASTM, 1956, vol. 56, pp. 593-620.
30. J. Shingledecker and G. Pharr: J. Mater. Eng. Perform., 2013, vol. 22(2), pp. 454-462.10.1007/s11665-012-0274-4 ↗
31. American Society of Mechanical Engineers: Case 2702 Seamless Ni-25Cr-20Co Material, ASME Boiler and Pressure Vessel Code, 2011.
32. F. Abe, M. Tabuchi, and M. Hayakawa: J. Pressure Vessel Technol., 2017, vol. 139(1), pp. 011403.10.1115/1.4033290 ↗
33. S. Zhang and Y. Takahashi: ASME 2018 Pressure Vessels and Piping Conference, 2018, p. 85079.
34. Special Metals, INCONEL® ALLOY 740H®. (PCC Energy Group. 2015) https://www.specialmetals.com/assets/smc/documents/alloys/inconel/inconel-alloy-740-h.pdf. Accessed 1 September 2020.
35. J. Li, R. Zhou, L. Tang, B. Wang, S. Hou, J. Li, W. Liu, H. Liu, and X. Li: Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials: Proc. Ninth International Conference, 2019, pp. 448–59.
36. X. W. Zhu, H. H. Cheng, M. H. Shen, and J. P. Pan: Adv. Mater. Res., 2013, vol. 791-793, pp. 374-377.10.4028/www.scientific.net/AMR.791-793.374 ↗
37. B. Wilshire and P. Scharning: Mater. Sci. Technol., 2009, vol. 25(2), pp. 242-248.10.1179/174328408X361508 ↗
38. B. M. Adam, J. D. Tucker, and G. Tewksbury: J. Alloys Compd., 2020, vol. 818, pp. 152907.10.1016/j.jallcom.2019.152907 ↗
39. M. Wang, W. Wang, Z. Liu, C. Sun, and L. Qian: Mater. Today Commun., 2018, vol. 14, pp. 188-198.10.1016/j.mtcomm.2018.01.009 ↗
40. H. Monajati, A. Taheri, M. Jahazi, and S. Yue: Metall. Mater. Trans. A, 2005, vol. 36(4), pp. 895-905.10.1007/s11661-005-0284-z ↗
41. H. J. McQueen and N. Ryan: Mater. Sci. Eng. A, 2002, vol. 322(1-2), pp. 43-63.10.1016/S0921-5093(01)01117-0 ↗
42. M. Fährmann, E. Fährmann, T. Pollock, and W. Johnson: Metall. Mater. Trans. A, 1997, vol. 28(9), pp. 1943-1945.10.1007/s11661-997-0124-4 ↗
43. A. Baldan: J. Mater. Sci., 2002, vol. 37(12), pp. 2379-2405.10.1023/A:1015408116016 ↗
44. M. Evans: Int. J. Press. Vessels Pip., 2011, vol. 88(11-12), pp. 449-451.10.1016/j.ijpvp.2011.08.001 ↗
45. K. A. Unocic, J. P. Shingledecker, and P. F. Tortorelli: JOM, 2014, vol. 66(12), pp. 2535-2542.10.1007/s11837-014-1208-4 ↗