journal article·2020-05Open access

Corrosion and Mechanical Performance of Grade 92 Ferritic-Martensitic Steel After Exposure to Supercritical Carbon Dioxide

Andrew Brittan, Jacob Mahaffey, Mark Anderson

Abstract

Grade 92 ferritic-martensitic steel is a candidate alloy for medium temperature (< 550 °C) components for the supercritical carbon dioxide (s-CO2) Brayton cycle. 1000 hours exposures were performed on base and welded material in s-CO2 at temperatures of 450 °C or 550 °C and compared to samples aged in Ar at 550 °C. Both s-CO2 exposures resulted in a duplex oxide growth and carburization, with 450 °C exhibiting carburization in a power law diffusion profile up to a depth of 200-250 µm, while 550 °C showed a linear profile up to a depth of 100 µm. The different profiles indicate much slower precipitation and coarsening of carbides at the lower temperature, allowing carbon to diffuse deeper into the material. However, 450 °C produced improved mechanical properties while 550 °C produced deteriorated properties. This was due to the higher density of carbon near the metal–oxide interface which leads to significant carbide coarsening and, subsequently, crack initiation and early failure. Additional exposure at 450 °C is predicted to increase deposited carbon, but further study would be needed to understand if and when carburization will produce a negative mechanical effect.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. [1] V. Dostal, A Supercritical Carbon Dioxide Cycle for Next Generation Nuclear Reactors. Massachusetts Institute of Technology, Cambridge, 2004.
2. [2] Y. Kato, T. Nitawaki, and Y. Muto: Nucl. Eng. Des., 2004, vol. 230, no. 1–3, pp. 195–207.10.1016/j.nucengdes.2003.12.002 ↗
3. I. G. Wright, B. A. Pint, J. P. Shingledecker, and D. Thimsen, “Materials Considerations for Supercritical CO2 Turbine Cycles,” in ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, 2013.10.1115/GT2013-94941 ↗
4. [4] R. L. Klueh and A. T. Nelson: J. Nucl. Mater., 2007, vol. 371, no. 1–3, pp. 37–52.10.1016/j.jnucmat.2007.05.005 ↗
5. [5] S. S. Wang, D. L. Peng, L. Chang, and X. D. Hui: Mater. Des., 2013, vol. 50, pp. 174–180.10.1016/j.matdes.2013.01.072 ↗
6. [6] J. C. Vaillant, B. Vandenberghe, B. Hahn, H. Heuser, and C. Jochum: Int. J. Press. Vessel. Pip., 2008, vol. 85, no. 1–2, pp. 38–46.10.1016/j.ijpvp.2007.06.011 ↗
7. [7] A. Vyrostkova, V. Homolova, J. Pecha, and M. Svoboda: Mater. Sci. Eng. A, 2008, vol. 480, no. 1–2, pp. 289–298.10.1016/j.msea.2007.07.036 ↗
8. [8] P. J. Ennis, A. Zielinska-Lipiec, O. Wachter, and A. Czyrska-Filemonowicz: Acta Mater., 1997, vol. 45, no. 12, pp. 4901–4907.10.1016/S1359-6454(97)00176-6 ↗
9. [9] Y. Gong, D. J. Young, P. Kontis, Y. L. Chiu, H. Larsson, A. Shin, J. M. Pearson, M. P. Moody, and R. C. Reed: Acta Mater., 2017, vol. 130, pp. 361–374.10.1016/j.actamat.2017.02.034 ↗
10. [10] R. Viswanathan and W. Bakker: J. Mater. Eng. Perform., 2001, vol. 10, no. 1, pp. 81–95.10.1361/105994901770345394 ↗
11. [11] S. G. Hong, W. B. Lee, and C. G. Park: J. Nucl. Mater., 2001, vol. 288, no. 2–3, pp. 202–207.10.1016/S0022-3115(00)00558-4 ↗
12. M. Taneike, K. Sawada, and F. Abe: Metall. Mater. Trans. A, 2004, vol. 35, pp. 1255–1262.10.1007/s11661-004-0299-x ↗
13. S. Kunimitsu, Y. You, N. Kasuya, Y. Sasaki, and Y. Hosoi: J. Nucl. Mater., vol. 179, pp. 689–692, 1991.10.1016/0022-3115(91)90182-7 ↗
14. L. Tan, D. T. Hoelzer, and J. T. Busby, “Microstructure and Basic Mechanical Properties of the Procured Advanced Alloys for the Advanced Radiation Resistant Materials Program,” No. ORNL/TM-2014/439, 2014.10.2172/1159485 ↗
15. M. N. Arik, Corrosion of Ferritic Steels in Supercritical CO2 at 450 °C. University of Wisconsin-Madison, Madison, 2017.
16. F. Rouillard, G. Moine, M. Tabarant, and J. C. Ruiz: Oxid. Met., 2012, vol 77, pp. 57–70.10.1007/s11085-011-9272-4 ↗
17. F. Rouillard and T. Furukawa: Corros. Sci., 2016, vol. 105, pp. 120–132.10.1016/j.corsci.2016.01.009 ↗
18. [18] D. Young, P. Huczkowski, T. Olszewski, T. Hüttel, L. Singheiser, and W. J. Quadakkers: 2014, Corros. Sci., vol. 88, pp. 161–169.10.1016/j.corsci.2014.07.024 ↗
19. [19] L. Martinelli, C. Desgranges, F. Rouillard, K. Ginestar, M. Tabarant, and K. Rousseau: Corros. Sci., 2015, vol. 100, pp. 253–266.10.1016/j.corsci.2015.07.032 ↗
20. [20] F. Rouillard, G. Moine, L. Martinelli, and J. C. Ruiz: Oxid. Met., 2012, vol. 77, pp. 27–55.10.1007/s11085-011-9271-5 ↗
21. [21] M. G. C. Cox, B. McEnaney, and V. D. Scott: Nature, 1972, vol. 237, no. 78, pp. 140–142.10.1038/237489a0 ↗
22. G. B. Gibbs, R. E. Pendlebury, and M. R. Wootton, “Protective and breakaway corrosion of mild steel in CO2,” in Proceedings of the British Nuclear Engergy Society International Conference on Corrosion of Steels in CO2, 1974.
23. [23] R. P. Oleksak, J. H. Tylczak, C. S. Carney, G. R. Holcomb, and O. N. Dogan: JOM, 2018, vol. 70, no. 8, pp. 1527–1534.10.1007/s11837-018-2952-7 ↗
24. [24] J. T. Mahaffey, “Effect of Partial Pressure of Oxygen and Activity of Carbon on the Corrosion of High Temperature Alloys in s-CO2 Environments,” University of Wisconsin-Madison, Madison, 2017.
25. [25] D. J. Young, High Temperature Oxidation and Corrosion of Metals, 1st ed. Elsevier, Amsterdam, 2008.
26. W. Marshall, Z. Zhang, and G. B. Holloway, “Welding Consumables for P92 and T23 Creep Resisting Steels,” in Fifth International EPRI RRAC Conference, 2002.
27. ASME, “Code Cases - Boilers and Pressure Vessels,” in ASME Boiler and Pressure Vessel Code, 2015.
28. [28] A. M. Brittan, J. Mahaffey, M. Anderson, and K. Sridharan: Mater. Sci. Eng. A, 2019, vol. 742, pp. 414–422.10.1016/j.msea.2018.11.029 ↗
29. J. Mahaffey, D. Adam, M. Anderson, and K. Sridharan, “Effect of oxygen impurity on corrosion in supercritical CO2 environments,” in The 5th International Supercritical CO2 Power Cycles Symposium, 2016.
30. [30] J. Mahaffey, D. Adam, A. Brittan, M. Anderson, and K. Sridharan: Oxid. Met., 2016, vol. 86, no. 5–6, pp. 567–580.10.1007/s11085-016-9654-8 ↗
31. J. D. Tucker, B. Adam, M. Anderson, B. Pint, G. R. Holcomb, C. S. Carney, H. Saari, L. Teeter, J. Mahaffey, O. Dogan, C. Jang, and S. Kung, “Supercritical CO2 round robin test program,” in The 6th International Supercritical CO2 Power Cycles Symposium, 2018.
32. [32] G. Chen, Q. Zhang, J. Liu, J. Wang, X. Yu, J. Hua, X. Bai, T. Zhang, J. Zhang, and W. Tang: Mater. Des., 2013, vol. 44, pp. 469–475.10.1016/j.matdes.2012.08.022 ↗
33. [33] J. A. Francis, W. Mazur, and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 2006, vol. 22, no. 12, pp. 1387–1395.10.1179/174328406X148778 ↗
34. B. Weiss and R. Stickler: Metall. Trans., 1972, vol. 3, pp. 851–866.10.1007/BF02647659 ↗
35. [35] F. Penalba, X. Gomez-Mitxelena, J. A. Jimenez, M. Carsi, and O. A. Ruano: ISIJ Int., 2016, vol. 56, no. 9, pp. 1662–1667.10.2355/isijinternational.ISIJINT-2016-097 ↗