Dissolution Behavior and Kinetics of γ′ Phase During Solution Treatment in Powder Metallurgy Nickel-Based Superalloy
Source abstract
Abstract
The dissolution behavior and kinetics of γ′ precipitates during solution treatment were investigated in an advanced powder metallurgy nickel-based superalloy FGH98. The microstructural evolutions were quantitatively characterized, and the dissolution kinetics were evaluated. The results show that due to the influence of precipitate size and element distribution, the dissolution rate of secondary γ′ precipitates was higher than that of large primary γ′ precipitates, but lower than that of small tertiary γ′ precipitates. With the increase of holding time, the area fractions of γ′ precipitates decreased and then gradually approached a thermodynamic equilibrium for all three heating temperatures. The dissolution kinetics of γ′ precipitates were quantitatively evaluated using the JMAK model. During the initial stage, the dissolution rate decreased rapidly with increasing holding time, and then, changed more slowly. The dissolution activation energy of γ′ precipitates increased with increasing holding time.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. [1] Roger C. Reed: The Superalloys fundamentals and applications, Cambridge University, New York, 2006, pp. 1-7.10.1017/CBO9780511541285 ↗
2. [2] T. Osada, Y.F. Gu, N. Nagashima, Y. Yuan, T. Yokokawa and H. Harada: Acta Mater., 2013, vol. 61(5), pp. 1820-29.10.1016/j.actamat.2012.12.004 ↗
3. TM Pollock, S Tin (2006) J. Propul. Power, 22(2), 361-410.2514/1.18239 ↗
4. [4] T. Murakumo, T. Kobayashi, Y. Koizumi and H. Harada: Acta Mater., 2004, vol. 52, pp. 3737-44.10.1016/j.actamat.2004.04.028 ↗
5. [5] H.T. Mallikarjuna, W.F. Caley, N.L. Richards: Corros. Sci., 2019, vol. 149, pp. 37-44.10.1016/j.corsci.2018.12.036 ↗
6. H. Harada, M. Yamazaki, Y. Koizumi, N. Sakuma, N. Furuya, H. Kamiya: High Temperature alloys for gas turbines, Springer, Dordrecht, 1982, 721-510.1007/978-94-009-7907-9_34 ↗
7. [7] C. Hays: J. Mater. Eng. Perform., 2008, vol. 17, pp. 254-59.10.1007/s11665-007-9135-y ↗
8. [8] P. Caron and T. Khan: Mater. Sci. Eng., 1983, vol. 61, pp. 173-84.10.1016/0025-5416(83)90199-4 ↗
9. [9] L. Shui, T. Jin, S. Tian and Z. Hu: Mater. Sci. Eng. A, 2007, vol. 454-455, pp. 461-6.10.1016/j.msea.2006.11.136 ↗
10. [10] G.C Huang, G.Q. Liu, M.N. Feng, M. Zhang, B.F. Hu and H. Wang: J. Alloys Compd., 2018, vol. 747, pp. 1062-72.10.1016/j.jallcom.2018.03.072 ↗
11. [11] M.G. Fahrmann and D.A. Metzler: JOM, 2016, vol. 68(11), pp. 2786-92.10.1007/s11837-016-2097-5 ↗
12. [12] X. Fan, A. Zhang, Z. Guo, X. Wang, J. Yang and J. Zou: J. Mater. Sci., 2019, vol. 54(3), pp. 2680-89.10.1007/s10853-018-3002-0 ↗
13. [13] M. Soucail, Y. Bienvenu: Mater. Sci. Eng. A, 1996, vol. 220, pp. 215-2.10.1016/S0921-5093(97)80011-1 ↗
14. [14] F. Masoumi, M. Jahazi, D. Shahriari and J. Cormier: J. Alloys Compd., 2016, vol. 658, pp. 981-5.10.1016/j.jallcom.2015.11.002 ↗
15. [15] S. L. Semiatin, N. C. Levkulich, A. E. Saurber, D. W. Mahaffey, E.J. Payton and O.N. Senkov: Metall. Mater. Trans. A, 2017, vol. 48(11), pp. 5567-78.10.1007/s11661-017-4322-4 ↗
16. [16] G. Wang, D.S. Xu, N. Ma, N. Zhou, E.J. Payton, R. Yang, M.J. Mills and Y. Wang: Acta Mater., 2009, vol. 57(2), pp. 316-5.10.1016/j.actamat.2008.09.010 ↗
17. [17] M. Pérez, C. Dumont, O. Nodin, S. Nouveau: Mater. Charact., 2018, vol. 146, pp. 169-1.10.1016/j.matchar.2018.10.003 ↗
18. [18] A. Seret, C. Moussa, M. Bernacki and B. Nathalie: Metall. Mater. Trans. A, 2018, vol. 49(9), pp. 4199-13.10.1007/s11661-018-4707-z ↗
19. [19] E. Balikci, A. Raman and R.A. Mirshams: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1993-03.10.1007/s11661-997-0156-9 ↗
20. [20] J.Y. Chen, Q.Y. Yu, J.X. Dong, M.C. Zhang and Z.H. Yao: Rare Met. Mater. Eng., 2017, vol. 46(10), pp. 2929-35.
21. [21] M. Jahazi and A.R. Mashreghi: Mater. Sci. Technol., 2002, vol. 18(4), pp. 458-2.10.1179/026708302225001606 ↗
22. [22] F. Masoumi, M. Jahazi, J. Cormier and D. Shahriari: MATEC Web Conf., 2014, vol. 14, pp. 13005.10.1051/matecconf/20141413005 ↗
23. [23] E.J. Payton, T.A. Wynn, M.J. Mills: J. Mater. Sci., 2012, vol. 47(20), pp. 7305-11.10.1007/s10853-012-6684-8 ↗
24. [24] M.J. Whelan: Met. Sci. J., 1969, vol. 3, pp. 95-97.10.1179/msc.1969.3.1.95 ↗
25. [25] T. Grosdidier, A. Hazotte and A. Simon: Scr. Metall. Mater., 1994, vol. 30(10), pp. 1257-62.10.1016/0956-716X(94)90255-0 ↗
26. [26] T. Grosdidier, A. Hazotte and A. Simon: Mater. Sci. Eng. A, 1998, vol. 256, pp. 183-96.10.1016/S0921-5093(98)00795-3 ↗
27. [27] H.T. Lee, S.W. Lee: J. Mater. Sci. Lett., 1990, vol, 9(5), pp. 516-17.10.1007/BF00725861 ↗
28. [28] A. Umantsev, G.B. Olson: Scr. Metall. Mater., 1993, vol. 29(8), pp. 1135-40.10.1016/0956-716X(93)90191-T ↗
29. [29] T. Philippe, P.W. Voorhees: Acta Mater., 2013, vol. 61(11), pp. 4237-44.10.1016/j.actamat.2013.03.049 ↗
30. [30] K. Kim, P.W. Voorhees: Acta Mater., 2018, vol.152, pp. 327-7.10.1016/j.actamat.2018.04.041 ↗
31. [31] I. Roy, E. Balikci, S. Ibekwe and A. Raman: J. Mater. Sci., 2005, vol. 40(23), pp. 6207-15.10.1007/s10853-005-3154-6 ↗
32. J. Jia, Y. Tao, Y. W. Zhang and Y. Zhang: Rare Met., 2009, 28(2), pp. 136-40
33. [33] G.E. Fuchs: Mater. Sci. Eng. A, 2001, vol. 300(1), pp, 52-60.10.1016/S0921-5093(00)01776-7 ↗
34. [34] S.L. Semiatin, S. Kim, F. Zhang and J.S. Tiley: Metall. Mater. Trans. A, 2015, vol. 46(4), pp. 1715-30.10.1007/s11661-015-2748-0 ↗
35. T.P. Gabb, J. Gayda, D.F. Johnson, R.A. MacKay, R.B. Rogers, C.K.Sudbrack, A. Garg, I.E. Locco, A.L. Semiatin, E. Kang, Report No. NASA/TM-2016-218936, Glenn Research Center, Cleveland, Ohio, 2016
36. [36] A.P.P. Singh, S. Nag, J.Y. Hwang, G.B. Viswanathan, J. Tiley, R. Srinivasan, H.L. Fraser and R. Banerjee: Mater. Charact., 2011, Vol. 42(6), pp: 1859-74.
37. [37] C.K. Sudbrack, L.J. Evans, A. Garg, D.E. Perea and D.K. Schreiber: Superalloys 2016, 2016, pp. 927-6.
38. [38] T.M. Pollock and A.S. Argon: Acta Metall. Mater., 1994, Vol. 42(6), pp: 1859-74.10.1016/0956-7151(94)90011-6 ↗
39. [39] T.Y. Wang, X.M. Wang, Z.H. Zhao and Z. Zhang: Mater. High Temp., 2016, vol. 33(1), pp. 51-67.10.1179/1878641315Y.0000000006 ↗
40. [40] R. Giraud, Z. Hervier, J. Cormier, G. Saint-Martin, F. Hamon, X. Milhet and J. Mendez: Metall. Mater. Trans. A, 2013, vol. 44(1), pp. 131-6.10.1007/s11661-012-1397-9 ↗
41. [41] M. Legros, G. Dehm, E. Arzt and T. J. Balk: Sci., 2008, vol. 319, pp: 1646-49.10.1126/science.1151771 ↗
42. [42] C.E. Campbell, W.J. Boettinger, U.R. Kattner: Acta Mater., 2002, vol. 50(4), pp. 775-2.10.1016/S1359-6454(01)00383-4 ↗