journal article·2018-09Open access

On the Rapid Assessment of Mechanical Behavior of a Prototype Nickel-Based Superalloy using Small-Scale Testing

Sabin Sulzer, Enrique Alabort, André Németh, Bryan Roebuck, Roger Reed

Abstract

Abstract An electro-thermal mechanical testing (ETMT) system is used to assess the mechanical behavior of a prototype single-crystal superalloy suitable for industrial gas turbine applications. Miniaturized testpieces of a few mm2cross section are used, allowing relatively small volumes to be tested. Novel methods involving temperature ramping and stress relaxation are employed, with the quantitative data measured and then compared to conventional methods. Advantages and limitations of the ETMT system are identified; particularly for the rapid assessment of prototype alloys prior to scale-up to pilot-scale quantities, it is concluded that some significant benefits emerge.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. R.E. Schafrik and S. Walston: in Superalloys 2008: Proceedings of the Eleventh International Symposium on Superalloys, R.C. Reed, K.A. Green, P. Caron, T. Gabb, M.G. Fahrmann, E.S. Huron, and S.A. Woodward, eds., TMS, Warrendale, 2008, pp. 3–9.
2. Xiong, W., Olson, G. B.: NPJ Comput. Mater. 2016, 2, 15009.10.1038/npjcompumats.2015.9 ↗
3. Pollock, T.M.: Nature Materials 2016, 15, 809–815.10.1038/nmat4709 ↗
4. B. Roebuck, D.C. Cox, and R.C. Reed: in Superalloys 2004: Proceedings of the Tenth International Symposium on Superalloys, K. Green, H. Harada, and T.M. Pollock, eds., TMS, Warrendale, 2004, pp. 523–28.10.7449/2004/Superalloys_2004_523_528 ↗
5. R.C. Reed, J. Moverare, A. Sato, F. Karlsson, and M. Hasselqvist: in Superalloys 2012: Proceedings of the Twelfth International Symposium on Superalloys, E.S. Huron, R.C. Reed, M.C. Hardy, M.J. Mills, R.E. Montero, P.D. Portella, and J. Telesman, eds., Wiley, New York, 2012, pp. 197–204.10.1002/9781118516430.ch22 ↗
6. Sato, A., Chiu, Y.-L., Reed, R. C.: Acta Materialia 2011, 59, 225–240.10.1016/j.actamat.2010.09.027 ↗
7. Sato, A., Moverare, J. J., Hasselqvist, M., Reed, R. C. Metall. Mater. Trans. A 2012, 43, 2302–2315.10.1007/s11661-011-0995-2 ↗
8. Sosa, J. M., Huber, D. E., Welk, B., Fraser, H. L.: Integr. Mater. Manuf. Innov. 2014, 3, 5.10.1186/2193-9772-3-10 ↗
9. LaVan, D. A., Sharpe, W. N.: Experimental Mechanics 1999, 39, 210–216.10.1007/BF02323554 ↗
10. Hemker, K. J., Sharpe, W. N.: Annual Review of Materials Research 2007, 37, 93–126.10.1146/annurev.matsci.36.062705.134551 ↗
11. Hyde, T. H., Sun, W., Williams, J. A.: International Materials Reviews 2007, 52, 213–255.10.1179/174328007X160317 ↗
12. Lord, J. D., Roebuck, B., Morrell, R., Lube, T.: Mater. Sci. Technol. 2010, 26, 127–148.10.1179/026708309X12584564052012 ↗
13. C.C. Dyson, W. Sun, C.J. Hyde, S.J. Brett, and T.H. Hyde: Mater. Sci. Technol. 2015, pp. 1–15.
14. Roebuck, B., Cox, D., Reed, R. C.: Scr. Mater., 2001, 44, 917–921.10.1016/S1359-6462(00)00662-X ↗
15. Cox, D. C., Roebuck, B., Rae, C. M. F., Reed, R. C. Mater. Sci. Technol. 2003, 19, 440–446.10.1179/026708303225010731 ↗
16. Pahlavanyali, S., Rayment, A., Roebuck, B., Drew, G., Rae, C.: Int. J. Fatigue 2008, 30, 397–403.10.1016/j.ijfatigue.2007.01.051 ↗
17. Roebuck, B., Loveday, M., Brooks, M. Int. J. Fatigue 2008, 30, 345–351.10.1016/j.ijfatigue.2007.01.055 ↗
18. S. Kuhr, G. Viswanathan, J. Tiley, and H. Fraser: in Superalloys 2012: Proceedings of the Twelfth International Symposium on Superalloys, E.S. Huron, R.C. Reed, M.C. Hardy, M.J. Mills, R.E. Montero, P.D. Portella, and J. Telesman, eds., Wiley, New York, 2012, pp. 103–10.
19. A.A.N. Németh, D.J. Crudden, D.M. Collins, D.E.J. Armstrong, and R.C. Reed: in Superalloys 2016: Proceedings of the 13th International Symposium on Superalloys, M.C. Hardy, E.S. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, and S. Tin, eds., Wiley, Hoboken, 2016, pp. 801–10.
20. Németh, A., Crudden, D. J., Armstrong, D., Collins, D. M., Li, K., Wilkinson, A. J., Grovenor, C., Reed, R. C.: Acta Mater., 2017, 126, 361–371.10.1016/j.actamat.2016.12.039 ↗
21. Barba, D., Pedrazzini, S., Vilalta-Clemente, A., Wilkinson, A. J., Moody, M.P., Bagot, P., Jerusalem, A., Reed, R. C.: Scr. Mater. 2017, 127, 37–40.10.1016/j.scriptamat.2016.08.029 ↗
22. Barba, D., Alabort, E., Pedrazzini, S., Collins, D. M., Wilkinson, A. J., Bagot, P., Moody, M. P., Atkinson, C., Jerusalem, A., Reed, R. C. Acta Mater. 2017, 135, 314–329.10.1016/j.actamat.2017.05.072 ↗
23. B. Roebuck, M. Brooks, and A. Pearce: Good Practice Guide for Miniature ETMT Tests: Measurement Good Practice Guide No. 137: PDB: 7798; Technical Report, National Physical Laboratory Division of Materials Applications, 2016.
24. Woodford, D. A. Mater. Res. Innov. 2016, 20, 379–389.10.1080/14328917.2016.1141086 ↗
25. Bensch, M., Preusner, J., Huttner, R., Obigodi, G., Virtanen, S., Gabel, J., Glatzel, U. Acta Mater. 2010, 58, 1607–1617.10.1016/j.actamat.2009.11.004 ↗
26. Bensch, M., Sato, A., Warnken, N., Affeldt, E., Reed, R. C., Glatzel, U. Acta Mater. 2012, 60, 5468–5480.10.1016/j.actamat.2012.06.036 ↗
27. Bensch, M., Konrad, C. H., Fleischmann, E., Rae, C., Glatzel, U. Materials Science and Engineering A 2013, 577, 179–188.10.1016/j.msea.2013.04.032 ↗
28. W. Hermann, H.G. Sockel, J. Han, and A. Bertram: in Superalloys 1996: Proceedings of the Eighth International Symposium on Superalloys, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, and T.M. Pollock, eds., TMS, Warrendale, 1996, pp. 229–38.10.7449/1996/Superalloys_1996_229_238 ↗
29. Fahrmann, M., Hermann, W., Fahrmann, E., Boegli, A., Pollock, T. M., Sockel, H. G. Materials Science and Engineering A 1999, 260, 212–221.10.1016/S0921-5093(98)00953-8 ↗
30. R. Morrell, D.A. Ford, and K. Harris: Calculations of Modulus in Different Directions for Single-Crystal Alloys, NPL Report DEPC-MN 004; Technical Report, NPL, 2004.
31. C.K. Bullough, M. Toulios, M. Oehl, and P. Lukáš: in Materials for Advanced Power Engineering 1998: Proceedings of the 6th Liége Conference/Jacqueline Lecomte-Beckers, F. Schubert and P.J. Ennis, J. Lecomte-Beckers, F. Schubert, and P.J. Ennis, eds., Schriften des Forschungszentrums Julich. Reihe Energietechnik/Energy technology, 1433-5522, Vol. 5, 2
32. Forschungszentrum Julich: Julich, Germany, 1998, pp. 861-78.
33. D.M. Shah and D.N. Duhl: in Superalloys 1984: Proceedings of the Fifth International Symposium on Superalloys, M. Gell, C.S. Kortovich, R.H. Bricknell, eds., TMS, Warrendale, 1984, pp. 105–14.10.7449/1984/Superalloys_1984_105_114 ↗
34. Miner, R. V., Gabb, T. P., Gayda, J., Hemker, K. J. Metallurgical Transactions A 1986, 17, 507–512.10.1007/BF02643957 ↗
35. Miner, R. V., Voigt, R. C., Gayda, J., Gabb, T. P. Metallurgical Transactions A 1986, 17, 491–496.10.1007/BF02643955 ↗
36. C.D. Allan: PhD Thesis, Massachusetts Institute of Technology, 1995.
37. Leverant, G. R., Duhl, D. N. Metallurgical Transactions 1971, 2, 907–908.10.1007/BF02662754 ↗
38. Kear, B. H., Oblak, J. M. Le Journal de Physique Colloques 1974, 35, 35–45.10.1051/jphyscol:1974702 ↗
39. L12 Ordered Alloys: Nabarro, F.R.N., Duesbery, M.S., Eds., Dislocations in Solids, Vol. 10; Elsevier, Amsterdam, 1996.
40. Nitz, A., Lagerpusch, U., Nembach, E. Acta Materialia 1998, 46, 4769–4779.10.1016/S1359-6454(98)00126-8 ↗
41. R.C. Reed and C.M.F. Rae: in Physical Metallurgy, D.E. Laughlin and K. Hono, eds., Elsevier, Amsterdam, 2014, pp. 2215–90.10.1016/B978-0-444-53770-6.00022-8 ↗
42. Smith, T. M., Rao, Y., Wang, Y., Ghazisaeidi, M., Mills, M. J. Acta Materialia 2017, 141, 261–272.10.1016/j.actamat.2017.09.027 ↗
43. Barba, D., Smith, T.M., Miao, J., Mills, M.J., and Reed, R.C. Metall. Mater. Trans. A (2018). https://doi.org/10.1007/s11661-018-4567-6.10.1007/s11661-018-4567-6 ↗
44. Crudden, D. J., Mottura, A., Warnken, N., Raeisinia, B., Reed, R. C. Acta Materialia 2014, 75, 356–370.10.1016/j.actamat.2014.04.075 ↗
45. Carry, C., Strudel, J. Acta Metallurgica 1977, 25, 767–777.10.1016/0001-6160(77)90092-X ↗
46. Carry, C., Strudel, J. Acta Metallurgica 1978, 26, 859–870.10.1016/0001-6160(78)90035-4 ↗
47. Carey, J. A., Sargent, P. M., Jones, D. R. H. Journal of Materials Science Letters 1990, 9, 572–575.10.1007/BF00725881 ↗
48. Sajjadi, S. A., Nategh, S. Materials Science and Engineering 2001, 307, 158–164.10.1016/S0921-5093(00)01822-0 ↗
49. D.A. Woodford, D.R. van Steele, K. Amberge, and D. Stiles, in Superalloys 1992: Proceedings of the Seventh International Symposium on Superalloys, R.A. MacKay, S.D. Antolovich, R.W. Stusrud, D.L. Anton, T. Khan, R.D. Kissinger, and D.L. Klarstrom, eds., TMS, Warrendale, 1992, pp. 657–64.10.7449/1992/Superalloys_1992_657_664 ↗
50. Woodford, D. A. Mater. Des. 1993, 14, 231–242.10.1016/0261-3069(93)90077-9 ↗
51. Woodford, D.A.: in Superalloys 1996: Proceedings of the Eighth International Symposium on Superalloys, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, and T.M. Pollock, eds., TMS, Warrendale, 1996, pp. 353–57.10.7449/1996/Superalloys_1996_353_357 ↗
52. Daleo, J. A., Ellison, K. A., Woodford, D. A. Journal of Engineering for Gas Turbines and Power 1999, 121, 129.10.1115/1.2816299 ↗
53. Beddoes, J., Mohammadi, T. The Journal of Strain Analysis for Engineering Design 2010, 45, 587–592.10.1177/030932471004500805 ↗
54. Nathal, M. V., Bierer, J., Evans, L., Pogue, E. A., Ritzert, F., Gabb, T. P. Materials Science and Engineering: A 2015, 640, 295–304.10.1016/j.msea.2015.05.102 ↗
55. Semiatin, S. L., Fagin, P. N., Goetz, R. L., Furrer, D. U., Dutton, R. E. Metall. Mater. Trans. A 2015, 46, 3943–3959.10.1007/s11661-015-3033-y ↗
56. Dupeux, M., Henriet, J., Ignat, M. Acta Metallurgica 1987, 35, 2203–2212.10.1016/0001-6160(87)90068-X ↗
57. Smith, T. M., Unocic, R. R., Deutchman, H., Mills, M. J. Materials at High Temperatures 2016, 33, 372–383.10.1080/09603409.2016.1180858 ↗
58. Rouault-Rogez, H., Dupeux, M., Ignat, M. Acta Metallurgica et Materialia 1994, 42, 3137–3148.10.1016/0956-7151(94)90411-1 ↗
59. Frost, H. J., Ashby, M. F., Deformation-mechanism maps, 1st ed., Pergamon Press: Oxford Oxfordshire and New York, 1982 .
60. Ghosh, R. N., Curtis, R. V., McLean, M. Acta Metallurgica et Materialia 1990, 38, 1977–1992.10.1016/0956-7151(90)90309-5 ↗
61. Mills, K. C., Recommended values of thermophysical properties for selected commercial alloys ; Woodhead: Cambridge, 2002 .10.1533/9781845690144 ↗
62. Mills, K. C., Youssef, Y. M., Li, Z., Su, Y. ISIJ International 2006, 46, 623–632.10.2355/isijinternational.46.623 ↗
63. Quested, P. N., Brooks, R. F., Chapman, L., Morrell, R., Youssef, Y., Mills, K. C. Materials Science and Technology 2009, 25, 154–162.10.1179/174328408X361454 ↗
64. Olson, G. B., Kuehmann, C. J. Scripta Materialia 2014, 70, 25.30.
65. Reed, R. C., Tao, T., Warnken, N. Acta Materialia 2009, 57, 5898.5913.
66. Rettig, R., Ritter, N. C., Helmer, H. E., Neumeier, S., Singer, R. F. Modelling and Simulation in Materials Science and Engineering 2015, 23, 35004.10.1088/0965-0393/23/3/035004 ↗
67. R. Rettig, K. Matuszewski, A. Muller, H.E. Helmer, N.C. Ritter, and R.F. Singer: in Superalloys 2016: Proceedings of the 13th International Symposium on Superalloys, M.C. Hardy, E.S. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, S. Tin, eds., Wiley, Hoboken, 2016, pp. 35–44.
68. Reed, R. C., Zhu, Z., Sato, A., Crudden, D. J. Materials Science and Engineering A 729 2016, 667, 261–278.10.1016/j.msea.2016.04.089 ↗
69. R.C. Reed, A. Mottura, and D.J. Crudden: in Superalloys 2016: Proceedings of the 13th International Symposium on Superalloys, M.C. Hardy, E.S. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, and S. Tin, eds., Wiley, Hoboken, 2016, pp. 13–23.
70. R. Völkl, E. Fleischmann, R. Rettig, E. Affeldt, and U. Glatzel: in Superalloys 2016: Proceedings of the 13th International Symposium on Superalloys, M.C. Hardy, E.S. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, and S. Tin, eds., Wiley, Hoboken, 2016, pp. 75–81.10.1002/9781119075646.ch8 ↗
71. M. Pröbstle, S. Neumeier, P. Feldner, R. Rettig, H.E. Helmer, R.F. Singer, M. Goken: Mater. Sci. Eng. A 2016, 676, 411–420.10.1016/j.msea.2016.08.121 ↗
72. Ritter, N. C., Schesler, E., Muller, A., Rettig, R., Korner, C., Singer, R. F.: Advanced Engineering Materials 2017, 19, 1700150.10.1002/adem.201700150 ↗
73. M. Segersäll, J. Moverare, K. Simonsson, and S. Johansson: in Superalloys 2012: Proceedings of the Twelfth International Symposium on Superalloys, E.S. Huron, R.C. Reed, M.C. Hardy, M.J. Mills, R.E. Montero, P.D. Portella, and J. Telesman, eds., Wiley, New York, 2012, pp. 215–23.
74. M. Segersäll, D. Leidermark, and J.J. Moverare: Mater. Sci. Eng. A, 2015, 623, 68–77.10.1016/j.msea.2014.11.026 ↗
75. Alabort, E.: PhD thesis, University of Oxford, Oxford, 2015.
76. Keshavarz, S., Ghosh, S.: Acta Materialia 2013, 61, 6549–6561.10.1016/j.actamat.2013.07.038 ↗
77. Choi, Y.S., Groeber, M.A., Shade, P.A., Turner, T.J., Schuren, J.C., Dimiduk, D.M., Uchic, M.D., Rollett, A.D.: Metallurgical and Materials Transactions A 2014, 45, 6352–6359.10.1007/s11661-014-2556-y ↗
78. Keshavarz, S., Ghosh, S., Reid, A.C., Langer, S.A.: Acta Materialia, 2016, 114, 106–115.10.1016/j.actamat.2016.05.016 ↗