Tensile Fracture Behavior of 316L Austenitic Stainless Steel Manufactured by Hot Isostatic Pressing
Source abstract
Abstract
Abstract Herein we investigate how the oxygen content in hot isostatically pressed (HIP’d) 316L stainless steel affects the mechanical properties and tensile fracture behavior. This work follows on from previous studies, which aimed to understand the effect of oxygen content on the Charpy impact toughness of HIP’d steel. We expand on the work by performing room-temperature tensile testing on different heats of 316L stainless steel, which contain different levels of interstitial elements (carbon and nitrogen) as well as oxygen in the bulk material. Throughout the work we repeat the experiments on conventionally forged 316L steel as a reference material. The analysis of the work indicates that oxygen does not contribute to a measureable solution strengthening mechanism, as is the case with carbon and nitrogen in austenitic stainless steels (Werner in Mater Sci Eng A 101:93–98, 1988). Neither does oxygen, in the form of oxide inclusions, contribute to precipitation hardening due to the size and spacing of particles. However, the oxide particles do influence fracture behavior; fractography of the failed tension test specimens indicates that the average ductile dimple size is related to the oxygen content in the bulk material, the results of which support an on-going hypothesis relating oxygen content in HIP’d steels to their fracture mechanisms by providing additional sites for the initiation of ductile damage in the form of voids.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Fusion materials and technologies · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. H. V. Atkinson and S. Davies, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 2000, vol. 31, pp. 2981-3000.10.1007/s11661-000-0078-2 ↗
2. H. T. Larker and R. Lundberg, Journal of the European Ceramic Society 1999, vol. 19, pp. 2367-2373.10.1016/S0955-2219(99)00109-0 ↗
3. C. Barre, Advanced Materials and Processes 1999, vol. 155, pp. 47-48.
4. Y. C. Jeon and K. T. Kim, International Journal of Mechanical Sciences 1999, vol. 41, pp. 815-830.10.1016/S0020-7403(98)00053-8 ↗
5. G. A. Rao and M. Kumar, Materials Science and Technology 1997, vol. 13, pp. 1027-1031.10.1179/mst.1997.13.12.1027 ↗
6. V. Viswanathan, T. Laha, K. Balani, A. Agarwal and S. Seal, Materials Science and Engineering R: Reports 2006, vol. 54, pp. 121-285.10.1016/j.mser.2006.11.002 ↗
7. W.B. Burdett: in American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, (2006).
8. W.B. Burdett: in American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 2010, pp. 815–820.10.1115/PVP2010-25209 ↗
9. W.B. Burdett, P. Hurrell, and A. Gilleland: in American Society of Mechanical Engineers, Pressure Vessels and Piping Conference Proceedings, 2004, pp 153–160.10.1115/PVP2004-2311 ↗
10. A. S. Helle, K. E. Easterling and M. F. Ashby, Acta Metallurgica 1985, vol. 33, pp. 2163-2174.10.1016/0001-6160(85)90177-4 ↗
11. H. R. Dugdale and J. B. Borradaile, Powder Metallurgy 2013, vol. 56, pp. 374-381.10.1179/1743290113Y.0000000076 ↗
12. S. Irukuvarghula, H. Hassanin, C. Cayron, M. M. Attallah, D. Stewart and M. Preuss, Acta Materialia 2017, vol. 133, pp. 269-281.10.1016/j.actamat.2017.04.068 ↗
13. A. J. Cooper, N. I. Cooper, A. Bell, J. Dhers and A. H. Sherry: Metallurgical and Materials Transactions A 2015, vol. 46, pp. 5126-5138.10.1007/s11661-015-3140-9 ↗
14. A. J. Cooper, N. I. Cooper, J. Dhers and A. H. Sherry: Metallurgical and Materials Transactions A 2016, vol. 47, pp. 4467-4475.10.1007/s11661-016-3612-6 ↗
15. A.J. Cooper, J. Dhers, and A.H. Sherry: 2016, p. V06AT06A012.
16. A. J. Cooper, R. J. Smith and A. H. Sherry, Metall and Mat Trans A 2017, vol. 48, pp. 2207-2221.10.1007/s11661-017-4005-1 ↗
17. T. Berglund and M. Östlund, 2016, p. V06AT06A014.
18. T.C. Jelfs and W.B. Burdett: in American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 2011, pp. 3–6.
19. G. Appa Rao, D. V. V. Satyanarayana, M. Srinivas and D. S. Sarma, Powder Metallurgy 2009, vol. 52, pp. 244-249.10.1179/003258909X12450768327180 ↗
20. Anders Lind, Johan Sundström and Alan Peacock, Fusion Engineering and Design 2005, vol. 75–79, pp. 979-983.10.1016/j.fusengdes.2005.06.301 ↗
21. L. Arnberg and A. Karlsson, Int. J. Powder Metall. 1988, vol. 24, pp. 107-112.
22. ASTM A988 / A988M-16: Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service, ASTM International, West Conshohocken, PA, 2016.
23. ASTM E8/E8M: Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, West Conshohocken, PA, 2010.
24. ASTM E3-01: Standard Practice for Preparation of Metallographic Specimens, ASTM International, West Conshohocken, PA, 1996.
25. ASTM E112-96: Standard Test Methods for Determining Average Grain Size, ASTM International, West Conshohocken, PA, 1996.
26. AL Thiebes, MA Reddemann, J Palmer, R Kneer, S Jockenhoevel and CG Cornelissen, Tissue Engineering Part C: Methods 2016, vol. 22, pp. 322-331.10.1089/ten.tec.2015.0381 ↗
27. ASTM A240/A240M-17: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications, ASTM International, West Conshohocken, PA, 2017.
28. ASTM A180-15: Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings, ASTM International, West Conshohocken, PA, 2016.
29. E.O. Hall: Proceedings of the Physical Society. Section B 1951, vol. 64, p. 747.10.1088/0370-1301/64/9/303 ↗
30. N. J. Petch, J. Iron Steel Inst. 1953, vol. 174, pp. 25-28.
31. K.J. Irvine, T. Gladman, and F.B. Pickering: J. Iron Steel Inst. 1969, vol. 207.
32. Naoto Ohkubo, Katsuhisa Miyakusu, Yoshihiro Uematsu and Hiroshi Kimura, ISIJ International 1994, vol. 34, pp. 764-772.10.2355/isijinternational.34.764 ↗
33. Koji Shibata, Masahiko Kogita, Cheng-Shu Chen and Toshio Fujita, Transactions of the Iron and Steel Institute of Japan 1988, vol. 28, pp. 406-412.10.2355/isijinternational1966.28.406 ↗
34. Kenji Kako, Eishi Kawakami, Joji Ohta and Masami Mayuzumi, Materials transactions 2002, vol. 43, pp. 155-162.10.2320/matertrans.43.155 ↗
35. G.N. Abrams, D.A. Nail, and H.D. Solomon: in MiCon 78: Optimization of Processing, Properties, and Service Performance Through Microstructural Control: a Symposium, ASTM International, 1979, p. 263.10.1520/STP672-EB ↗
36. SK Maity, AK Rajak, MC Shekhar, SD Singh, International Journal of Scientific Engineering and Technology 2014, vol. 3, pp. 101-108.
37. F. Pickering: Mater. Sci. Technol. 1992.
38. Ewald Werner, Materials Science and Engineering: A 1988, vol. 101, pp. 93-98.
39. J.A. Kitchener, J.O.M. Bockris, M. Gleiser, and J.W. Evans: Acta Metall. 1953, vol. 1, pp. 93–101.10.1016/0001-6160(53)90013-3 ↗
40. A. Šalak, M. Selecká, and H. Danninger: Machinability of Powder Metallurgy Steels, Cambridge Int Science Publishing, 2005.
41. J.A. Kitchener, J.O.M. Bockris, Molly Gleiser, and J.W. Evans: Trans. Faraday Soc., 1952, vol. 48, pp. 995–97.10.1039/tf9524800995 ↗
42. R.W.K. Honeycombe: The Plastic Deformation of Metals, 1975.
43. K Oka, S Ohnuki, S Yamashita, N Akasaka, S Ohtsuka and H Tanigawa, Materials Transactions 2007, vol. 48, pp. 2563-2566.10.2320/matertrans.MD200715 ↗
44. LL Hsiung, MJ Fluss and A Kimura, Materials Letters 2010, vol. 64, pp. 1782-1785.10.1016/j.matlet.2010.05.039 ↗
45. A. Hirata, T. Fujita, Y. R. Wen, J. H. Schneibel, C. T. Liu and M. W. Chen, Nat Mater 2011, vol. 10, pp. 922-926.10.1038/nmat3150 ↗
46. M. K. Miller, K. F. Russell and D. T. Hoelzer, Journal of Nuclear Materials 2006, vol. 351, pp. 261-268.10.1016/j.jnucmat.2006.02.004 ↗
47. Karl Dawson and Gordon J. Tatlock: Journal of Nuclear Materials 2014, vol. 444, pp. 252-260.10.1016/j.jnucmat.2013.10.003 ↗
48. E. Hornbogen and K.-H. Zum Gahr: Metallography, 1975, vol. 8, pp. 181–202.10.1016/0026-0800(75)90038-5 ↗
49. H. Gleiter and E. Hornbogen: Phys. Status Solidi (b) 1965, vol. 12, pp. 235–50.
50. E. Orowan, Zeitschrift für Physik 1934, vol. 89, pp. 634-659.10.1007/BF01341480 ↗
51. G.E Dieter: Mech. Metall, 1961.
52. I.A. Ibrahim, F.A. Mohamed and E. J. Lavernia, Journal of Materials Science 1991, vol. 26, pp. 1137-1156.10.1007/BF00544448 ↗
53. K. Teichmann, C.H. Liebscher, R. Völkl, S. Vorberg and U. Glatzel, Platin. Met. Rev. 2011, vol. 55, pp. 217-224.10.1595/147106711X591971 ↗