Friction Stir Welding (FSW) of Aged CuCrZr Alloy Plates
Source abstract
Abstract
Friction Stir Welding (FSW) of Cu-0.80Cr-0.10Zr (in wt pct) alloy under aged condition was performed to study the effects of process parameters on microstructure and properties of the joint. FSW was performed over a wide range of process parameters, like tool-rotation speed (from 800 to 1200 rpm) and tool-travel speed (from 40 to 100 mm/min), and the resulting thermal cycles were recorded on both sides (advancing and retreating) of the joint. The joints were characterized for their microstructure and tensile properties. The welding process resulted in a sound and defect-free weld joint, over the entire range of the process parameters used in this study. Microstructure of the stir zone showed fine and equiaxed grains, the scale of which varied with FSW process parameters. Grain size in the stir zone showed direct correlation with tool rotation and inverse correlation with tool-travel speed. Tensile strength of the weld joints was ranging from 225 to 260 MPa, which is substantially lower than that of the parent metal under aged condition (~ 400 MPa), but superior to that of the parent material under annealed condition (~ 220 MPa). Lower strength of the FSW joint than that of the parent material under aged condition can be attributed to dissolution of the precipitates in the stir zone and TMAZ. These results are presented and discussed in this paper.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Temple Smith, and C.J. Dawes: The Welding Institute, TWI, International Patent Application No. PCT/GB92/02203 and GB Patent Application No. 9125978.8, 1991.
2. A.C. Somashekharan, and L.E. Murr: Mater. Charact., 2004, vol. 52, pp. 49–64.10.1016/j.matchar.2004.03.005 ↗
3. A. Scialpi, M. De Giorgi, L.A.C. De Filippis, R. Nobile, F.W. Panella: Mater. Des., 2008, vol. 29,pp. 928-936.10.1016/j.matdes.2007.04.006 ↗
4. Kumar K., Kailas S.V.: Mater. Des.,2008, vol. 29, pp. 791-797.10.1016/j.matdes.2007.01.012 ↗
5. Elangovan, K., Balasubramanian, V.: Mater. Charact., 2008, vol. 59 (9),pp. 1168-1177.10.1016/j.matchar.2007.09.006 ↗
6. Ghosh M., Kumar K., Kailas S.V., Ray A.K.: Mater. Des., 2010, vol. 31(6), pp. 3033-3037.10.1016/j.matdes.2010.01.028 ↗
7. R.S. Mishra, Z.U. Ma: Mater. Sci. Eng. R, 2005, vol. 50,pp. 1-78.10.1016/j.mser.2005.07.001 ↗
8. R. Nandan, T. Debroy, H.K.D.H. Bhadeshia: Prog. Mater. Sci., 2008, vol. 53, pp. 980-1023.10.1016/j.pmatsci.2008.05.001 ↗
9. Bhadeshia H.K.D.H., DebRoy T.: Sci. Technol. Weld. Join., 2009, vol 14(3), pp. 193-196.10.1179/136217109X421300 ↗
10. Ramulu M., Edwards P.D., Sanders D.G., Reynolds A.P., Trapp T.: Mater. Des., 2010, vol. 31, pp. 3056–3061.10.1016/j.matdes.2010.01.023 ↗
11. L. Zhou L., Liu H.J., Liu Q.W.: Mater.Des.,2010, vol. 31, pp. 2631–2636.10.1016/j.matdes.2009.12.014 ↗
12. Kiyohiro Y., Naoto T., Akihiko K., Yoshiaki M., Hidetoshi F., Hisashi S., Shuhei N., Akira H., Takuya N.: Mater. Sci. Eng. A, 2014, vol. 595, pp. 291–296.10.1016/j.msea.2013.12.022 ↗
13. De A., Bhadeshia H.K.D.H, DebRoy T.: Mater. Sci. Technol., 2014, vol. 30(9), pp. 1050-1056.10.1179/1743284714Y.0000000534 ↗
14. V Manvatkar, A De, L E Svensson, T DebRoy: Scripta Mater., 2015, vol. 94(1), pp. 36-39.10.1016/j.scriptamat.2014.09.012 ↗
15. Huabing Li, Shouxing Yang, Shucai Zhang, Bin Zhang, Zhouhua Jiang, Hao Feng, Peide Han, Jizhong Li: Mater.Des.,2017, vol. 118, pp. 207–217.10.1016/j.matdes.2017.01.034 ↗
16. Shokri V., Sadeghi A., Sadeghi M.H.: Mater. Sci. Eng. A, 2017, vol. 693, pp. 111–120.10.1016/j.msea.2017.03.054 ↗
17. Nandan R., Roy G.G., Lienert T.J., DebRoy T.: Acta Mater., 2007, vol. 55, pp. 883–895.10.1016/j.actamat.2006.09.009 ↗
18. Reynolds A.P.: Scripta Mater., 2008, vol. 58, pp. 338–342.10.1016/j.scriptamat.2007.10.048 ↗
19. Arora A., Nandan R., Reynolds A. P., DebRoy T.: Scripta Mater., 2009, vol.60, pp. 13–16.10.1016/j.scriptamat.2008.08.015 ↗
20. A. Arora, Z. Zhang, A. Deb, and T. DebRoy: Scripta Mater., 2009, vol. 61, pp. 863–866.10.1016/j.scriptamat.2009.07.015 ↗
21. Shi L., Wu C.S.: J. Manuf. Proc., 2017, vol. 25,pp. 323–339.10.1016/j.jmapro.2016.11.008 ↗
22. Won-Bae Lee, Seung-Boo Jung: Mater. Lett., 2004, vol. 58,pp. 1041-1046.10.1016/j.matlet.2003.08.014 ↗
23. Polar A., Indacochea J.E.: J. Manuf. Sci. Eng., 2009, vol. 131, pp. 0310121-7.10.1115/1.3123313 ↗
24. Liu H.J., Shen J.J., Huang Y. X., Kuang L. Y., Liu C., Li C.:Sci. Technol. Weld.Join., 2009, vol. 14(6), pp. 577-583.10.1179/136217109X456951 ↗
25. J.J. Shen, H.J. Liu, and F. Cui: Mater. Des., 2010, vol. 31, p. 3937–42.10.1016/j.matdes.2010.03.027 ↗
26. Sun Y.F., Fujii H.: Mater. Sci. Engg. A, 2010, vol. 527,pp. 6879-6886.10.1016/j.msea.2010.07.030 ↗
27. Hwang Y.M., Fan P.L., Lin C.H.: J. Mater. Process. Technol., 2010, vol. 210,pp. 1667-1672.10.1016/j.jmatprotec.2010.05.019 ↗
28. Nan Xu, Rintaro Ueji, Yoshiaki Morisada, Hidetoshi Fuji: Mater. Des., 2014, vol. 56, pp. 20–25.10.1016/j.matdes.2013.10.076 ↗
29. Xue P., Wang B.B., Chen F.F., Wang W.G., Xiao B.L., Ma Z.Y.: Mater. Charact., 2016, vol. 121, pp. 187–194.10.1016/j.matchar.2016.10.009 ↗
30. Nan Xu, Qining Song, Yefeng Bao, Yongfeng Jiang, Jun Shen: Mater. Sci. Eng. A, 2017, vol. 687, pp. 73–81.10.1016/j.msea.2017.01.052 ↗
31. Batra I.S., Dey G.K., Kulkarni U.D., Banerjee S.: Mater. Sci. Eng. A, 2002, vol. 356,pp. 32-36.10.1016/S0921-5093(02)00852-3 ↗
32. M. Lipa, A. Durocher, R. Tivey, Th. Huber, B. Schedler, and J. Weigert: Fus. Eng. Des., 2005, vol. 75–79, pp. 469–73.10.1016/j.fusengdes.2005.06.056 ↗
33. K. Ioki, F. Elio, V. Barabash, V. Chuyanov, V. Rozov, X. Wang, J. Chen, L. Wang, P. Lorenzetto, A. Peacock, M. Enoeda, H. Nishi, B.G. Hong, Y.H. Jeong, A. Gervash, I. Mazul, T. Tanaka, M. Ulrickson:Fus. Eng. Des., 2007, vol. 82,pp. 1774-1780.10.1016/j.fusengdes.2007.02.013 ↗
34. A. Durocher, D. Ayrault, Ch. Chagnot, M. Lipa, W. Saikaly: J. Nucl. Mater., 2007, vol. 367–370, pp. 1208–12.10.1016/j.jnucmat.2007.03.220 ↗
35. Suri A.K., Krishnamurthy N., Batra I.S.: J. Phys., 2010, vol. 208, no. 1, p. 012001.
36. Jeong-Yong Park, Jung-Suk Lee, Byung-Kwon Choi, Bong Guen Hong, Yong Hwan Jeong:Fus. Eng.Des., 2008, vol. 83, pp. 1503-1507.10.1016/j.fusengdes.2008.07.006 ↗
37. Huabing Li, Shouxing Yang, Shucai Zhang, Binbin Zhang, Zhouhua Jiang, HaoFeng, Peide Han, Jizhong Li:J. Nucl.Mater., 2011, vol. 417, pp. 916-919.10.1016/j.jnucmat.2010.12.064 ↗
38. Obitz C., Öijerholm J., Wikman S., Bratu E.: Nucl. Mater.Enrg., 2016, vol. 9, pp. 261–266.
39. Ihira R., Gwon H., Kasada R., Konishi S.: Fus. Eng. Des., 2016, vol. 109–111, pp. 485–488.10.1016/j.fusengdes.2016.02.070 ↗
40. Shueh C., Chan C.K., Chang C.C., Sheng I.C.: Nucl. Instr. Methods Phys. Res. A, 2017, vol. 841,pp. 1–4.10.1016/j.nima.2016.10.025 ↗
41. Pankaj S., Kaushal J., Dey G.K., Amit A.: Wear, 2017, vol. 378-379, pp. 82–89.
42. J. Kaushal, S. Pankaj, A. Amit, K. Bhanumurthy, and G.K. Dey: Unpublished research, 2017.
43. R.W. Messler Jr.: Principles of Welding: Processes, Physics, Chemistry, and Metallurgy, Wiley, Weinheim, 2004, pp. 608–09.