Effect of Chemical Composition on Susceptibility to Weld Solidification Cracking in Austenitic Weld Metal
Source abstract
Abstract
The influence of the chemical composition, especially the niobium content, chromium equivalent Creq, and nickel equivalent Nieq, on the weld solidification cracking susceptibility in the austenite single-phase region in the Schaeffler diagram was investigated. Specimens were fabricated using the hot-wire laser welding process with widely different compositions of Creq, Nieq, and niobium in the region. The distributions of the susceptibility, such as the crack length and brittle temperature range (BTR), in the Schaeffler diagram revealed a region with high susceptibility to solidification cracking. Addition of niobium enhanced the susceptibility and changed the distribution of the susceptibility in the diagram. The BTR distribution was in good agreement with the distribution of the temperature range of solidification (ΔT) calculated by solidification simulation based on Scheil model. ΔT increased with increasing content of alloying elements such as niobium. The distribution of ΔT was dependent on the type of alloying element owing to the change of the partitioning behavior. Thus, the solidification cracking susceptibility in the austenite single-phase region depends on whether the alloy contains elements. The distribution of the susceptibility in the region is controlled by the change in ΔT and the segregation behavior of niobium with the chemical composition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. S. Kou: Welding Metallurgy, John Wiley & Sons, New Jersey, 2003.
2. J.C. Lippold and D. J. Kotecki: Welding Metallurgy and Weldability of Stainless Steels, John Wiley & Sons, New Jersey, 2005.
3. A. L. Schaeffler: Metal Progress, 1949, vol. 56, pp. 680 - 680B.
4. American Welding Society: Welding Handbook, 9th ed., vol. 4, Materials and Applications, Miami, 2011, pp. 413–22.
5. K. Saida, H. Matsushita, K. Nishimoto, K. Kikuchi, J. Nakayama: Science Technology of Welding and Joining, 2013, vol. 18, pp. 616-623.10.1179/1362171813Y.0000000149 ↗
6. Y. Arata, F. Matsuda, H. Nakagawa, and S. Katayama: Trans. JWRI, 1978, vol. 7 1978, pp. 169–72.
7. V. P. Kujanpaa, S. A. David and C. L. White: Welding Journal, 1986, vol. 65, pp. 203s-212s.
8. V. P. Kujanpaa, N. Suutala, T. Takalo, T. Moisio: Welding Research International, 1979, vol. 9, pp. 55-76.
9. T. Ogawa: Welding International., 1991, vol. 5, pp. 931-935.10.1080/09507119109446818 ↗
10. T. Ogawa, E. Thsunetomi: Welding Journal, 1982, vol. 63, pp. 82s-93s.
11. R. Phaoniam, K. Shinozaki, M. Yamamoto, K. Kadoi, S. Tsuchiya, A. Nishijima: Welding in the World, 2013, vol. 57, pp. 607-613.10.1007/s40194-013-0055-1 ↗
12. K. Kadoi, K. Shinozaki, M. Yamamoto, K. Owaki, K. Inose and D. Takayanagi: Quarterly Journal of Japan Welding Society, 2011, vol. 29, pp. 62s-65s.10.2207/qjjws.29.62s ↗
13. D. Wang, S. Sakoda, K. Kadoi, K. Shinozaki and M. Yamamoto: Quarterly Journal of Japan Welding Society, 2015, vol. 33, pp. 39s-43s.10.2207/qjjws.33.39s ↗
14. F. Matsuda, H. Nakagawa, S. Ogata and S. Katayama: Transactions of JWRI, 1978, vol. 7, pp. 59- 70.
15. R. A. Patterson, J. O. Milewski: Welding Journal, 1985, vol. 64, pp. 227s-31s.
16. J. N. Dupont, C. V. Robino, A. R. Marder: Welding Journal, 1998, vol. 77, pp. 417s-31s.
17. J.N. DuPont, C.V. Robino, and A.R. Marder: Science and Technology of Welding and Joining, 1999, Vol. 4, pp. 1-14.10.1179/stw.1999.4.1.1 ↗