journal article·2017-08

Effect of Grade on Thermal–Mechanical Behavior of Steel During Initial Solidification

Matthew L. S. Zappulla, Lance C. Hibbeler, Brian G. Thomas

Publisher page

Abstract

Thermal–mechanical analysis of solidification is important to understand crack formation, shape problems, and other aspects of casting processes. This work investigates the effect of grade on thermal–mechanical behavior during initial solidification of steels during continuous casting of a wide strand. The employed finite element model includes non-linear temperature-, phase-, and carbon content-dependent elastic–viscoplastic constitutive equations. The model is verified using an analytical solution, and a mesh convergence study is performed. Four steel grades are simulated for 30 seconds of casting without friction: ultra-low-carbon, low-carbon, peritectic, and high-carbon steel. All grades show the same general behavior. Initially, rapid cooling causes tensile stress and inelastic strain near the surface of the shell, with slight complementary compression beneath the surface, especially with lower carbon content. As the cooling rate decreases with time, the surface quickly reverses into compression, with a tensile region developing toward the solidification front. Higher stress and inelastic strain are generated in the high-carbon steel, because it contains more high-strength austenite. Stress in the δ-ferrite phase near the solidification front is always very small, owing to the low strength of this phase. This modeling methodology is a step toward designing better mold taper profiles for continuous casting of different steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. M. Rappaz: Curr. Opin. Solid State Mater. Sci., 2016, vol. 20, pp. 37–45.10.1016/j.cossms.2015.07.002 ↗
2. C. Beckermann: Int. Mater. Rev., 2002, vol. 47, pp. 243–61.10.1179/095066002225006557 ↗
3. M. Asta, C. Beckermann, A. Karma, W. Kurz, R. Napolitano, M. Plapp, G. Purdy, M. Rappaz, and R. Trivedi: Acta Mater., 2009, vol. 57, pp. 941–71.10.1016/j.actamat.2008.10.020 ↗
4. W.J. Boettinger, S.R. Coriell, A.L. Greer, A. Karma, W. Kurz, M. Rappaz, and R. Trivedi: Acta Mater., 2000, vol. 48, pp. 43–70.10.1016/S1359-6454(99)00287-6 ↗
5. W.T. Lankford: Metall. Trans., 1972, vol. 3, pp. 1331–57.10.1007/BF02643017 ↗
6. M.B. Santillana: Ph.D. Thesis, Delft University of Technology, 2013.
7. S.N. Singh, and K.E. Blazek: J. Met., 1974, pp. 17–27.10.1007/BF03355898 ↗
8. S.C. Moon: Ph.D. Thesis, University of Wollongong, 2015.
9. M.M. Wolf and K. Kurz: Metall. Mater. Trans. B, 1981, vol. 12B, pp. 85–93.10.1007/BF02674761 ↗
10. J. Konishi, M. Militzer, I.V. Samarasekera, and J.K. Brimacombe: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 413–23.10.1007/s11663-002-0053-y ↗
11. P. Presoly, R. Pierer, and C. Bernhard: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5377–88.10.1007/s11661-013-1671-5 ↗
12. E. Wielgosz and T. Kargul: J. Therm. Anal. Calorim., 2015, vol. 119, pp. 1547–53.10.1007/s10973-014-4302-5 ↗
13. K.E. Blazek, O. Lanzi, and H. Yin: in AISTech - Iron Steel Technol. Conf. Proc., Pittsburgh, PA, 2008, pp. 609–25.10.1051/metal:2009005 ↗
14. A. Kagawa and T. Okamoto: Mater. Sci. Technol., 1986, vol. 2, pp. 997–1008.10.1179/mst.1986.2.10.997 ↗
15. J.O. Andersson, T. Helander, L. Hoglund, P. Shi, and B. Sundman: Calphad, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
16. C.W. Bale, P. Chartrand, and S.A. Degterov: Calphad, 2002, vol. 26, pp. 189–228.10.1016/S0364-5916(02)00035-4 ↗
17. J. Miettinen, S. Louhenkilpi, H. Kytönen, and J. Laine: Math. Comput. Simul., 2010, vol. 80, pp. 1536–50.10.1016/j.matcom.2009.11.002 ↗
18. R.D. Pehlke, A. Jeyarajan, and H. Wada: Summary of Thermal Properties for Casting Alloys and Mold Materials, University of Michigan, Ann Arbor, MI, 1982.
19. A. Jablonka, K. Harste, and K. Schwerdtfeger: Steel Res., 1991, vol. 62, pp. 24–33.10.1002/srin.199101722 ↗
20. P.J. Wray: Metall. Mater. Trans. A, 1984, vol. 15A, pp. 2059–73.10.1007/BF02646840 ↗
21. P.J. Wray: Metall. Mater. Trans. A, 1984, vol. 15A, pp. 2041–58.10.1007/BF02646839 ↗
22. M. Suzuki and Y. Yamaoka: Mater. Trans., 2003, vol. 44, pp. 836–44.10.2320/matertrans.44.836 ↗
23. C. Li and B.G. Thomas: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 1151–72.10.1007/s11663-004-0071-z ↗
24. J. Sengupta, C. Ojeda, and B.G. Thomas: Int. J. Cast Met. Res., 2009, vol. 22, pp. 8–14.10.1179/136404609X368037 ↗
25. Y. Meng, C. Li, J.T. Parkman, and B.G. Thomas: in International Conference on Modeling Casting Welding and Advanced Solidification Processes, M. Rappaz, ed., The Minerals, Metals & Materials Society, Charlotte, NC, 2004, pp. 33–39.
26. B.G. Thomas and J.T. Parkman: in Thermec ’97 International Conference on Thermomechanical Processes Steel Other Mater., Wollongong, Australia, TMS, 1997, pp. 2279–85.
27. R.J. Dippenaar, I.V. Samarasekera, and J.K. Brimacombe: ISS Trans., 1986, vol. 7, pp. 33–43.
28. D.P. Lorento: Billet Mold Taper and Secondary Cooling Pattern Design, Private Communication, 2002.
29. B.G. Thomas and C. Ojeda: in ISS Steelmaking Conference, ISS-AIME, Indianapolis, IN, 2003, pp. 295–308.
30. C. Li and B.G. Thomas: in 85th Steelmaking Conference Proceedings, Iron and Steel Society, Warrendale, PA, 2002, pp. 109–30.
31. C. Li and B.G. Thomas: in ISS Steelmaking Conference, ISS-AIME, Indianapolis, IN, 2003, pp. 685–700.
32. M.R. Ridolfi, B.G. Thomas, G. Li, and U. Della Foglia: La Rev. Metall., 1994, vol. 91, pp. 609–20.10.1051/metal/199491040609 ↗
33. B.G. Thomas and W.R. Storkman: in Modeling Control of Casting and Welding Processes - IV, A.F. Giamei and G.J. Abbaschian, eds., The Metallurgical Society, Palm Coast, FL, 1988, pp. 287–97.
34. A. Moitra, B.G. Thomas, and W.R. Storkman: in TMS Annual Meeting, The Minerals, Metals & Materials Society, San Diego, CA, 1992, pp. 1–31.
35. M. Bellet, O. Jaouen, and I. Poitrault: Int. J. Numer. Methods Heat Fluid Flow, 2005, vol. 15, pp. 120–42.10.1108/09615530510578410 ↗
36. M. Bellet and V.D. Fachinotti: in Modeling Casting Welding Advanced Solidification Processes. IX, C.A. Gandin and M. Bellet, eds., The Minerals, Metals & Materials Society, Opio, France, 2006, pp. 169–76.
37. B. Bottger, M. Apel, M.B. Santillana, and D. Eskin: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 3765–77.10.1007/s11661-013-1732-9 ↗
38. J. Tiaden: J. Cryst. Growth, 1999, vol. 198–199, pp. 1275–80.10.1016/S0022-0248(98)01009-4 ↗
39. B. Bottger, G.J. Schmitz, and M.B. Santillana: Trans. Indian Inst. Met., 2012, vol. 65, pp. 613–15.10.1007/s12666-012-0169-y ↗
40. B.G. Thomas and J.T. Parkman: in Materials Society Annual Meeting, M. Chu and E. Lavernia, eds., The Minerals, Metals & Materials Society, San Antonio, TX, 1998, pp. 509–20.
41. J.K. Brimacombe: Can. Metall. Q., 1976, vol. 15, pp. 163–75.10.1179/cmq.1976.15.2.163 ↗
42. C. Cicutti, M. Valdez, T. Perez, G. DiGresia, W. Balante, and J. Petroni: in Steelmaking Conference Proceedings, Iron and Steel Society, Warrendale, PA, 2002, pp. 97–107.
43. N. Kapaj, M. Pavlicevic, and A. Poloni: in Steelmaking Conference Proceedings, Iron and Steel Society, Warrendale, PA, 2001, pp. 369–76.
44. J.K. Park, I.V. Samarasekera, B.G. Thomas, and U.S. Yoon: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 425–36.10.1007/s11663-002-0054-x ↗
45. M.M. Wolf: Iron Steelmak., 1996, vol. 23, pp. 47–51.
46. P. Duvvuri, B. Petrus, and B.G. Thomas: in AISTech - Iron Steel Technology Conference Proceedings, AIST, Indianapolis, IN, 2014, pp. 2881–94.
47. A.W. Cramb: in Fundam. Metall., Elsevier, 2005, pp. 399–452.10.1533/9781845690946.2.399 ↗
48. M.M. Wolf: in Continuous Casting Vol 9, Initial Solidification Strand Surface Quality of Peritectic Steels, M.M. Wolf, ed., Iron and Steel Society/AIME, Warrendale, PA, 1997, pp. 211–29.
49. J. Konishi, M. Militzer, I.V. Samarasekera, and J.K. Brimacombe: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 413–23.10.1007/s11663-002-0053-y ↗
50. S. Koric, L.C. Hibbeler, R. Liu, and B.G. Thomas: Numer. Heat Transf. Part B Fundam., 2010, vol. 58, pp. 371–92.10.1080/10407790.2011.540954 ↗
51. B.G. Thomas, R. O’Malley, T. Shi, Y. Meng, D. Creech, and D. Stone: in Modeling Casting Welding Advanced Solidification Processes IX, 2000, pp. 769–76.
52. S. Koric and B.G. Thomas: J. Mater. Process. Technol., 2008, vol. 197, pp. 408–18.10.1016/j.jmatprotec.2007.06.060 ↗
53. S. Koric and B.G. Thomas: Int. J. Numer. Methods Eng., 2006, vol. 66, pp. 1955–89.10.1002/nme.1614 ↗
54. Y.M. Won, K.H. Kim, T.J. Yeo, and K.H. Oh: ISIJ Int., 1998, vol. 38, pp. 1093–99.10.2355/isijinternational.38.1093 ↗
55. R.D. Cook: Concepts and Applications of Finite Element Analysis, Wiley, 1989.
56. ABAQUS: ABAQUS 6.13 Theory Manual, DS SIMULIA Corp, Providence, RI, 2013.
57. ABAQUS: ABAQUS 6.13 Subroutine Manual, DS SIMULIA Corp, Providence, RI, 2013.
58. L.C. Hibbeler and B.G. Thomas: in 6th European Continuous Casting Conference, Association Italiana Metallurgia, Ricionne, Italy, 2008, pp. 1–16.
59. Y. Meng and B.G. Thomas: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 685–705.10.1007/s11663-003-0040-y ↗
60. Y.M. Won and B.G. Thomas: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1755–67.10.1007/s11661-001-0152-4 ↗
61. K. Harste: Ph.D. Thesis, Technischen Universität Clausthal, 1989.
62. K. Harste and K. Schwerdtfeger: ISIJ Int., 2003, vol. 43, pp. 1011–20.10.2355/isijinternational.43.1011 ↗
63. I. Jimbo and A.W. Cramb: Metall. Mater. Trans. B, 1993, vol. 24B, pp. 5–10.10.1007/BF02657866 ↗
64. H. Mizukami, A. Yamanaka, and T. Watanabe: ISIJ Int., 2002, vol. 42, pp. 375–84.10.2355/isijinternational.42.375 ↗
65. B.G. Thomas, I.V. Samarasekera, and J.K. Brimacombe: Metall. Mater. Trans. B, 1987, vol. 18B, pp. 131–47.10.1007/BF02658438 ↗
66. J. Lubliner: Plasticity Theory, Revised, 2005.
67. H. Zhu: Ph.D. Thesis, The University of Illinois at Urbana-Champaign, 1996.
68. P.F. Kozlowski, B.G. Thomas, J.A. Azzi, and H. Wang: Metall. Mater. Trans. A, 1992, vol. 23A, pp. 903–18.10.1007/BF02675567 ↗
69. D. Slavik and H. Sehitoglu: J. Eng. Mater. Technol., 1986, vol. 108, pp. 303–12.10.1115/1.3225887 ↗
70. J.H. Weiner and B.A. Boley: J. Mech. Phys. Solids, 1963, vol. 1, pp. 145–54.10.1016/0022-5096(63)90049-8 ↗
71. M. Rowan, B.G. Thomas, R. Pierer, and C. Bernhard: Metall. Mater. Trans. B, 2011, vol. 42B, pp. 837–51.10.1007/s11663-010-9470-5 ↗
72. M.L.S. Zappulla: Master’s Thesis, The University of Illinois at Urbana-Champaign, 2016.
73. R. Pierer, C. Bernhard, and C. Chimani: La Rev. Metall., 2007, vol. 3, pp. 72–83.10.1051/metal:2007132 ↗
74. B.G. Thomas, A. Moitra, and R. McDavid: Iron Steelmaker (ISS Trans.) 1996, vol. 23, pp. 143–56.
75. T. Murakami and H. Kashima-cho: in Current Advanced Materials Processes Report ISIJ Meeting, Iron and Steel Institute of Japan, Tokyo, 1992, p. 1291.
76. L.C. Hibbeler, B.G. Thomas, R.C. Schimmel, and G. Abbel: Metall. Mater. Trans. B, 2012, vol. 43B, pp. 1156–72.10.1007/s11663-012-9696-5 ↗
77. Y.M. Won, T.J. Yeo, K.H. Oh, J.K. Park, J. Choi, and C.H. Yim: ISIJ Int., 1998, vol. 38, pp. 53–62.10.2355/isijinternational.38.53 ↗