journal article·2016-10

Improvement in Abrasion Wear Resistance and Microstructural Changes with Deep Cryogenic Treatment of Austempered Ductile Cast Iron (ADI)

Sanja Šolić, Matjaž Godec, Zdravko Schauperl, Črtomir Donik

Publisher page

Abstract

The application of a deep cryogenic treatment (DCT) during the heat-treatment processes for different types of steels has demonstrated a significant influence on their mechanical and tribological properties. A great deal of research was conducted on steels, as well as on other kinds of materials, such as hard metal, grey cast iron, aluminum, aluminum alloys, etc., but not on austempered ductile iron (ADI). In this research the influence of a deep cryogenic treatment on the microstructure and abrasive wear resistance of austempered ductile iron was investigated. The ductile cast iron was austempered at the upper ausferritic temperature, deep cryogenically treated, and afterwards tempered at two different temperatures. The abrasion wear resistance was tested using the standard ASTM G65 method. The microstructure was characterized using optical microscopy, field-emission scanning electron microscopy, electron back-scattered diffraction and X-ray diffraction in order to define the microstructural changes that influenced the properties of the ADI. The obtained results show that the deep cryogenic treatment, in combination with different tempering temperatures, affects the matrix microstructure of the austempered ductile iron, which leads to an increase in both the abrasion wear resistance and the hardness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · High Entropy Alloys Studies · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. [1] V. Kilicli, M. Erdogan: Int. J. Cast Met. Res. 2007, vol. 20, pp. 202–214.10.1179/136404607X256051 ↗
2. [2] M. Ferry, W. Xu: Mater. Charact. 2004, vol. 53, pp. 43-4910.1016/j.matchar.2004.07.008 ↗
3. A. M. Kamshushi, Doctoral thesis, University of Malta, 2005.
4. T. Tun, K. T. Lwin (2008) J. Met. Mater. Miner. 18(2), 199-205
5. [5] Y. Sahin, M. Erdogan, V. Kilicli: Mater. Sci. Eng. A, 2007, vol. 444, pp. 31–3810.1016/j.msea.2006.06.071 ↗
6. [6] C.Z. Wu, Y.J. Chen, T.S. Shih: Mater. Charact., 2002, vol. 48, pp. 43– 5410.1016/S1044-5803(02)00232-2 ↗
7. [7] J. M. Han, Q. Zou, G. C. Barber, T. Nasir, D. O. Northwood, X. C. Sun, P. Seaton: Wear, 2012, vol. 201-201, pp. 99–10510.1016/j.wear.2012.05.003 ↗
8. [8] B. Radulovic, B. Bosnjak: Mater. Tehnol. 2000, vol. 35 (5), pp. 207–212.
9. [9] L. Sidjanin, RE. Smallman: Mater. Sci. Technol., 1992, vol. 8, pp. 1095– 10310.1179/mst.1992.8.12.1095 ↗
10. [10] WJ. Dubensky, KB. Rundman: AFS Trans., 1985, vol. 93, pp. 389– 394
11. D.J. Moore, T.N. Rouns, K.B. Rundamn, J. Heat Treat. 4, 1985, vol. 1, pp. 7–24.10.1007/BF02835485 ↗
12. [12] D.N. Collins: Adv. Mater. Process., 1998, vol. 154 (6), pp. H23–H29.
13. D. Mohanal, S. Renganarayanan, A. Kalanidhi: Cryogenics, 2001, vol. 41, pp. 149–155.10.1016/S0011-2275(01)00065-0 ↗
14. [14] A. Molinari, M. Pellizzari, S. Gialanella, G. Straffelini, K.H. Stiasny: J. Mater. Process. Technol., 2001, vol. 118, pp. 350–355.10.1016/S0924-0136(01)00973-6 ↗
15. [15] R.F. Barron: Cryogenics, 1982, vol. 22, pp. 409–414.10.1016/0011-2275(82)90085-6 ↗
16. [16] P.J. Singh, S.L. Mannan, T. Jayakumar, D.R.G. Achar: Eng. Fail. Anal., 2005, vol. 12, pp. 263–271.10.1016/j.engfailanal.2004.03.008 ↗
17. [17] B. Podgornik, F. Majdic, V. Leskovsek, J. Vizintin: Wear, 2012, vol. 288, pp. 88 – 9310.1016/j.wear.2011.04.001 ↗
18. A. Bensely, A. Prabhakaran, D. Mohanal, G. Nagarajan: Cryogenics, 2006, vol. 45, pp. 747-75410.1016/j.cryogenics.2005.10.004 ↗
19. [19] F. Meng, K. Tagashira, R. Azuma, H. Sohma, ISIJ Int., 1994, vol. 34, pp. 205–210.10.2355/isijinternational.34.205 ↗
20. [20] S. Šolić, F. Cajner, P. Panjan, Materialwiss. Werkstofftech., 2013, vol. 44 (12), pp. 950–95810.1002/mawe.201300168 ↗
21. [21] S. Šolić, F. Cajner, V. Leskovšek, MP Mat. Test,. 2012, vol. 2012/10, pp. 688-693
22. P.F. Stratton, IFHTSE 2005. Pula, pp. 11–19
23. Yang, H.S., Wang, J., Shen, B.L., Liu, H.H., Gao, S.J., Huang, S.J.: Wear, 2006., vol. 261, pp. 1150-115410.1016/j.wear.2006.03.021 ↗
24. [24] T. Slatter, R. Lewis, A.H. Jones: Wear, 2011, vol. 271, pp. 1481– 148910.1016/j.wear.2011.01.041 ↗
25. [25] R. Thornton, T. Slatter, A.H. Jones, R. Lewis: Wear, 2011, vol. 271, pp. 2386– 239510.1016/j.wear.2010.12.014 ↗
26. [26] Baldissera, P., Delprete, D.: Open Mech. Eng. J. 2008, vol. 2, pp. 1–11.10.2174/1874155X00802010001 ↗
27. S. Putatunda, C. Martis, R. Papp, and F. Diekman: Proceedings of the 26th ASM Heat Treating Society Conference, 2011, pp. 44–49.
28. [28] S. Panneerselvam, C. J. Martis, S. K. Putatunda, J. M. Boileau: Mater. Sci. Eng., A, 2015, vol. 626, pp. 237-24610.1016/j.msea.2014.12.038 ↗
29. [29] J. Zimba, D.J. Simbi, E. Navara, Cem. Concr. Compos., 2003, vol. 25, pp. 643–64910.1016/S0958-9465(02)00078-1 ↗
30. [30] J. Yang, S. K. Putatunda: Mater. Sci. Eng., A, 2005, vol. 406, pp. 217–22810.1016/j.msea.2005.06.036 ↗
31. [31] J. Yang, S. K. Putatunda: Mater. Des., 2004, vol. 25, pp. 219–23010.1016/j.matdes.2003.09.021 ↗
32. [32] P.H.S. Cardoso, C.L. Israel, T.R. Strohaecker: Wear, 2014, vol. 313, pp. 29–3310.1016/j.wear.2014.02.009 ↗
33. [33] X. Sun, Y. Wang, D.Y. Li, G. Wang: Wear, 2013, vol. 301, pp. 116–12110.1016/j.wear.2012.12.018 ↗
34. [34] S.K. Putatunda, S. Kesani, R. Tackett, G. Lawes: Mater. Sci. Eng., A, 2006, vol. 435 – 436, pp. 112-12210.1016/j.msea.2006.07.051 ↗
35. R.E. Reed: Physical Metallurgy Principles, 2nd edn, Nostrand Company, New York, 1973
36. D.A. Porter, K.E. Easterling, Phase Transformations in Metals and Alloys, 2nd edn, Chapman Hall, New York, 199210.1007/978-1-4899-3051-4 ↗
37. W.F. Smith, Structure and Properties of Engineering Alloys, McGraw-Hill, New York, 1981
38. [38] P. Y. Cheng, J. Hui-Jin, L. Jin-Hai, L. Guo-Lu: Mater. Charact. 72 (2012) 53 – 5810.1016/j.matchar.2012.07.006 ↗
39. [39] S. Laino, JA Sikora, RC Dommarco. Wear, 2008; 265:1-7.10.1016/j.wear.2007.08.013 ↗
40. [40] AA Nofal, L. Jekova: J Univ Chem Technol Metall 2009; 44(3):213-28.
41. [41] AK. Chowdhury, SK. Samanta, DP. Chattopadhyay, S. Kumar, T. Ray, SS. Sinha Roy.: Indian Foundry J 2009;55(8):23-31.
42. [42] S. Laino, J.A. Sikora, R.C. Dommarco.: ISIJ Int 2009;49(8):1239-45.10.2355/isijinternational.49.1239 ↗
43. [43] S. Laino, J.A. Sikora, R.C. Dommarco. ISIJ Int 2009;49(8):1239-4510.2355/isijinternational.49.1239 ↗
44. S. Šolić and S. Jakovljević: Proceedings of the EWF EUROJOIN 8 Conference, 2012, pp. 91–98.
45. S. Šolić, Z. Schauperl, and S. Jakovljević: Book of abstracts, 20th International Conference on Materials and Technology, 2012, p. 215
46. [46] S. Panneerselvam, C. J. Martis, S. K. Putatunda, J. M. Boileau: Mater. Sci. Eng., A, 2015, vol. 626, pp. 237-24610.1016/j.msea.2014.12.038 ↗
47. S. Šolić, Z. Schauperl, and M. Godec: Proceedings Book of 13th International Foundrymen Conference, 2013, pp. 395–403
48. [48] Cullity BD. Elements of X-ray diffraction. Reading, MA: Addison-Wesley; 1974. pp. 391-395
49. G. Roberts, R. Kennedy, and G. Krauss: Tool Steels, 5th edition, ASM, 1998, pp. 99–10110.31399/asm.tb.ts5.9781627083584 ↗
50. Xiaojun, X., Xu, W., Ederveen, F.H., van der Zwaag, S.: Wear 301 (2013) 89–9310.1016/j.wear.2013.01.002 ↗
51. [51] Balaji Narayanaswamy, Peter Hodgson, Hossein Beladi: Wear 350-351 (2016) 155–16510.1016/j.wear.2016.01.013 ↗
52. [52] K.H.Z. Gahr, Microstructure and Wear of Materials, Elsevier Science Ltd., Amsterdam, 1987.
53. [53] P.J. Mutton, J.D. Watson: Wear 1978, vol. 48, pp. 385–398.10.1016/0043-1648(78)90234-X ↗
54. [54] L.Q. Xu, N.F. Kennon: Wear, 1991, vol. 148, pp. 101–112.10.1016/0043-1648(91)90209-D ↗
55. A. Molinari, M. Pellizzari, S. Gialanella, G. Straffelini and K. H. Stiasny: Proceedings of Conference on Advances Materials Processes Technologies, 1999, pp. 1461–69.
56. Berrahmoune, M.R., Berveiller, S., Inal, K., Moulin, A., Patoor, E.: Mater. Sci. Eng. A, 2004, vol. 378, pp. 304–30710.1016/j.msea.2003.10.372 ↗
57. [57] J.D. Gates: Wear, 1998, vol. 214, pp. 139–14610.1016/S0043-1648(97)00188-9 ↗
58. [58] M.M. Kruschov, Wear, 1974, vol. 28, pp. 69–88.10.1016/0043-1648(74)90102-1 ↗
59. [59] R.C.D. Richardson: Wear, 1968, vol. 11, pp. 245–34510.1016/0043-1648(68)90175-0 ↗
60. [60] R.A. Martínez: Eng. Fract. Mech., 2010, vol. 77, pp. 2749–276210.1016/j.engfracmech.2010.07.013 ↗
61. [61] G. Francucci, J. Sikora, R. Dommarco: Mater. Sci. Eng., A, 2008, vol. 485, pp. 46–5410.1016/j.msea.2007.07.081 ↗