journal article·2016-06Open access

Instability of the Liquid Metal–Pattern Interface in the Lost Foam Casting of Aluminum Alloys

W. D. Griffiths, M. J. Ainsworth

Abstract

Abstract The nature of the liquid metal–pattern interface during mold filling in the Lost Foam casting of aluminum alloys was investigated using real-time X-ray radiography for both normal expanded polystyrene, and brominated polystyrene foam patterns. Filling the pattern under the action of gravity from above or below had little effect on properties, both cases resulting in a large scatter of tensile strength values, (quantified by their Weibull Modulus). Countergravity filling at different velocities demonstrated that the least scatter of tensile strength values (highest Weibull Modulus) was associated with the slowest filling, when a planar liquid metal–pattern interface occurred. Real-time X-ray radiography showed that the advancing liquid metal front became unstable above a certain critical velocity, leading to the entrainment of the degrading pattern material and associated defects. It has been suggested that the transition of the advancing liquid metal–pattern interface into an unstable regime may be a result of Saffman–Taylor Instability.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics · Materials Engineering and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. S. Shivkumar, X. Yao and M. Makhlouf, Scripta Met. et Mat., 1995. Vol. 33, pp39-46.10.1016/0956-716X(95)00146-M ↗
2. X. Yao and S. Shivkumar, Mat. Sci. Technol., 1997, vol. 13, pp. 841-846.10.1179/mst.1997.13.10.841 ↗
3. S. Shivkumar, Mat. Sci. Technol., 1994, vol. 10, pp. 986-992.10.1179/mst.1994.10.11.986 ↗
4. J. Yang, T. Huang and J. Fu, AFS Trans., 1998, vol. 106, pp.21-26.
5. M. H. Warner, B.A. Miller and H.E. Littleton, AFS Trans., 1998, vol. 106, pp. 777-785.
6. T. Molibog and H. Littleton, AFS Trans., 2001, vol. 109, pp. 1523-1554.
7. H. E. Littleton, B. A. Miller, D. Sheldon and C.E. Bates, AFS Trans., 1996, vol. 104, pp. 335-346.
8. W. L. Sun, H.E. Littleton and C.E. Bates, AFS Trans., 2002, vol. 110, pp. 1347-1356.
9. M. Sands and S. Shivkumar, J. Mat. Sci., 2003, vol. 38, pp. 667-673.10.1023/A:1021859523363 ↗
10. Y. Sun, H.L. Tsai and D.R. Askeland, AFS Trans., 1992, vol. 101, pp. 297-308.
11. Q. Zhao, J.T. Burke and T.W. Gustafson, AFS Trans., 2002, vol. 110, pp. 1399-1414.
12. W. D. Griffiths and P. J. Davies, Int. J. Cast Metals Res., 2011, vol. 24, pp. 267-278.10.1179/1743133610Y.0000000011 ↗
13. D. A. Caulk, AFS Trans., 2007, vol. 115, pp. 833-844.
14. M. R. Barone and D.A. Caulk, Int. J. Heat and Mass Transfer, 2005. Vol. 48, pp. 4132-4149.10.1016/j.ijheatmasstransfer.2005.03.031 ↗
15. D. A. Caulk, Int. J. Heat and Mass Transfer, 2006 vol. 49, pp. 3831-3845.10.1016/j.ijheatmasstransfer.2006.04.015 ↗
16. D. A. Caulk, Int. J. Heat and Mass Transfer, 2006, vol. 49 pp. 2124-2136.10.1016/j.ijheatmasstransfer.2005.12.007 ↗
17. D. A. Caulk, AFS Trans., 2007, vol. 115, pp. 845-860.
18. M. J. Ainsworth and W. D. Griffiths, AFS Trans., 2006, vol. 114, pp. 222-236.
19. G. I. Taylor, London Math. Soc., 1883, vol. 14, pp. 170-177.
20. Lord Rayleigh, Phil. Mag., 1871, vol. 42, pp. 362-377.10.1080/14786447108640585 ↗
21. HLF von Helmholtz (1868) Monatsberichte der Königlichen Preussiche Akademie der (Monthly Reports of the Royal Prussian Academy of Philosophy in Berlin). Wiss. Berl. 23:215-228.
22. P. G. Saffman and G. I. Taylor, Proc. Royal Society, 1958, vol. 245, pp 312-329.10.1098/rspa.1958.0085 ↗
23. C. W Hirt and M. R. Barkhudarov, Flow Science Inc. Technical Notes, 1999, TN 45-1.
24. A. Khalili and K. Kromp, J. Mat. Sci., 1991, vol. 26, pp. 6741-6752.10.1007/BF02402669 ↗
25. W. P. Cox and R.L. Ballman, J. Appl. Polymer Sci., 1960, vol. 4, p. 121.10.1002/app.1960.070041022 ↗
26. C. Diduch, R. Dubay and W. G Li, Polymer Eng. Sci. J., 2004, vol. 44, pp. 2308-2317.10.1002/pen.20258 ↗
27. N. R. Green and J. Campbell, AFS Trans., 1994, vol. 102, pp. 341-347.
28. T. C. Pedersen, AFS Trans., 2006, vol. 114, 887-898.
29. W Kurz, DJ Fisher (1992) Fundamentals of Solidification, 3rd ed, Trans Tech Publications, Brookfield, p. 293.
30. J. Joshi, R. Lehan and T. Nosker, J. Appl. Polymer Sci., 2006, vol. 99, pp. 2044-2051.10.1002/app.22492 ↗
31. P. Davies, PhD Thesis, University of Birmingham, 2007.