journal article·2016-01

Effect of ZrO2 Nanoparticles on the Microstructure of Al-Si-Cu Filler for Low-Temperature Al Brazing Applications

Ashutosh Sharma, Myung-Hwan Roh, Do-Hyun Jung, Jae-Pil Jung

Publisher page

Abstract

In this study, the effect of ZrO2 nanoparticles on Al-12Si-20Cu alloy has been studied as a filler metal for aluminum brazing. The microstructural and thermal characterizations are performed using X-ray diffraction (XRD), scanning electron microscope (SEM), and differential thermal analysis (DTA). The intermetallic compound (IMC) phases are identified by the energy-dispersive spectroscopy analysis coupled with the SEM. The filler spreading test is performed according to JIS-Z-3197 standard. XRD and SEM analyses confirm the presence of Si particles, the CuAl2 (θ) intermetallic, and the eutectic structures of Al-Si, Al-Cu, and Al-Si-Cu in the Al matrix in the monolithic and composite samples. It is observed that when the ZrO2 is added in the alloy, the CuAl2 IMCs and Si particles are found to be dispersed uniformly in the Al matrix up to 0.05 wt pct ZrO2. DTA results show that the liquidus temperature of Al-12Si-20Cu filler metal is dropped from ~806.78 K to 804.6 K (533.78 °C to 531.6 °C) with a lowering of 2 K (2 °C) in liquidus temperature, when the amount of ZrO2 is increased up to 0.05 wt pct. It is also shown that the presence of ZrO2 nanoparticles in the filler metal has no deleterious effect on wettability up to 0.05 wt pct of ZrO2. The ultimate tensile strength and elongation percentage are also found to improve with the addition of ZrO2 nanoparticles in the Al-12Si-20Cu alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. I.J. Polmear: Light alloys From traditional alloys to nanocrystals, 4th ed., Elsevier-Butterworth Heinemann, 2006.
2. A.H. Musfirah and A.G. Jaharah: J. Appl. Sci. Res., 2012, vol. 8, pp. 4865-4875.
3. K. Thulukkanam: Heat Exchanger Design Handbook, 2nd ed., CRC press, Taylor and Francis group, Florida USA, 2013.10.1201/b14877 ↗
4. L.C. Tsao, W.P. Weng, M.D. Cheng, C.W. Tsao and T.H. Chuang: J. Mater. Eng. Perform., 2002, vol. 11, pp. 360-364.10.1361/105994902770343863 ↗
5. G. Humpston, S.P.S. Sangha and D.M. Jacobson: Mater. Sci. Technol., 1995, vol. 11, pp. 1161-1168.10.1179/mst.1995.11.11.1161 ↗
6. K. Suzuki, M. Kagayama and Y. Takeuchi: J. Jpn. Inst. Light Met., 1993, vol. 43, pp. 533-538.10.2464/jilm.43.533 ↗
7. W. Dai, Song-bai Xue, F. Ji, J. Lou, B. Sun and Shui-qing Wang: Int. J. Min. Met.Mater., 2013, vol. 20, pp. 365-370.10.1007/s12613-013-0736-1 ↗
8. Z. Niu, J. Huang, H. Yang, S. Chen, and X. Zhao: J. Mater. Eng. Perform., 2015, DOI:10.1007/s11665-015-1509-y.10.1007/s11665-015-1509-y ↗
9. L.C. Tsao, M.J. Chiang, W.H. Lin, M.D. Cheng and T.H. Chuang: Mater. Charact., 2002, vol.48, pp. 341– 346.10.1016/S1044-5803(02)00276-0 ↗
10. D.M. Jacobson, G. Humpston, and S.P.S. Sangha: A New Low Melting Point Aluminium Braze, Welding Research Supplement, 1996, pp. 243s–250s.
11. F. Stadler, H. Antrekowitsch, W. Fragner, H. Kaufmann and P. J. Uggowitzer: Int. J. Cast Metal. Res., 2012, vol. 25, pp. 215-224.10.1179/1743133612Y.0000000004 ↗
12. C.J. Hang, C.Q. Wang, M. Mayer, Y.H. Tian, Y. Zhou and H.H. Wang: Microelectron. Reliab., 2008, vol. 48, pp. 416–424.10.1016/j.microrel.2007.06.008 ↗
13. A. Sharma, S. Bhattacharya, S. Das, H.-J. Fecht and K. Das:J. Alloy. Compd., 2013, vol. 574, pp. 609–616.10.1016/j.jallcom.2013.06.023 ↗
14. A. Sharma, S. Bhattacharya, S. Das and K. Das: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5587-5601.10.1007/s11661-013-1894-5 ↗
15. J. Shen, Y.C. Liu, Y.J. Han, Y.M. Tian and H.X. Gao: J. Electron. Mater., 2006, vol. 35, pp. 1672-1679.10.1007/s11664-006-0216-8 ↗
16. I.S. El-Mahallawi, A.Y. Shash and A.E. Amer: Metals, 2015, vol. 5, pp. 802-821.10.3390/met5020802 ↗
17. J. Nowacki and K. Moraneic: JMPEG, 2015, vol. 24, pp. 426-433.10.1007/s11665-014-1246-7 ↗
18. A. Sharma, D.U. Lim, and J.P. Jung: Mater. Sci. Technol., 2015, in press.
19. A.E. Karantzalis, A. Lekatou, E. Georgatis, V. Poulas and H. Mavros: JMPEG, 2010, vol. 19, pp. 585-590.10.1007/s11665-009-9505-8 ↗
20. A. Miranda, N. Alba-Baena, B.J. McKay, D.G. Eskin, S.H. Ko and J.S. Shin: Mater Sci. Forum, 2013, vol. 765, pp. 245-249.10.4028/www.scientific.net/MSF.765.245 ↗
21. Japanese Industrial Standard, JIS Z-3197, 2012.
22. ASTM E-8: Standard Test Methods for Tension Testing of Metallic Materials, STM International, West Conshohocken, PA, 2011, www.astm.org.
23. JIS Z 3192: Methods for Tension and Shear Tests for Brazed Joint, 1988.
24. S.Y. Chang, L.C. Tsao, T.Y. Li and T.H. Chuang: J. Alloy. Compd., 2009, vol. 488, pp. 174–180.10.1016/j.jallcom.2009.08.056 ↗
25. A. L. Kolesnikova and I. A. Ovid’ko, Phys Rev. B, 2004, vol. 69, pp. 035412.10.1103/PhysRevB.69.035412 ↗
26. H. Choi and X. Li: J. Mater. Sci., 2012, vol. 47, pp. 3096–3102.10.1007/s10853-011-6143-y ↗
27. Q. Li, T. Xia, Y. Lan, W. Zhao, L. Fan and P. Li: J. Alloy. Compd., 2013, vol. 577, pp. 232–236.10.1016/j.jallcom.2013.04.043 ↗
28. J.L. Murray, A.J. McAlister: Bull. Alloy Phase Diagr., 1984, vol. 5, pp. 74-84.10.1007/BF02868729 ↗
29. Q.S. Mei and K. Lu: Prog. Mater. Sci., 2007, vol. 52, pp. 1175–1262.10.1016/j.pmatsci.2007.01.001 ↗
30. D. G. Gromov, S. A. Gavrilov, E. N. Redichev and R. M. Ammosov: Phys. Solid State, 2007, vol. 49, pp. 178–184.10.1134/S1063783407010283 ↗
31. S.M.L. Nai, J. Wei and M. Gupta: Thin Solid Films, 2006, vol. 504, pp. 401 – 404.10.1016/j.tsf.2005.09.057 ↗
32. H. Choi, H. Konishi and X. Li: Mater. Sci. Eng. A, 2012, vol. 541, pp. 159– 165.10.1016/j.msea.2012.01.131 ↗
33. C.S. Goh, J. Wei, L.C. Lee and M. Gupta: Acta Mater., 2007, vol. 15, pp. 5115-5121.10.1016/j.actamat.2007.05.032 ↗
34. N. Ramakrishnan: Acta Mater., 1996, vol. 44, pp. 69-77.10.1016/1359-6454(95)00150-9 ↗
35. Z. Zhang, D.L. Chen: Scripta Mater., 2006, vol. 54, 1321-1326.10.1016/j.scriptamat.2005.12.017 ↗
36. M.M. Schwartz: Brazing, ASM International, Materials Park, 44073-0002, 2006.