Industrial Application of Ultrasonic Vibrations to Improve the Structure of Al-Si Hypereutectic Alloys: Potential and Limitations
Source abstract
Abstract
This work presents the results of research conducted by the authors over the past years in Nippon Light Metal Co., ltd. In the first stage, highly durable ceramic sonotrodes were designed and manufactured to introduce ultrasonic vibrations into molten metal in a launder or in a hot top during DC casting. It was shown that ultrasound can greatly refine the crystals of primary silicon in 75 to 178-mm billets, if vibration amplitude exceeds 40 μm (p–p). The structure uniformity was insufficient in launder treatment and fairly good in hot-top treatment. Care must be taken in controlling the passage of melt through the cavitation zone in order to fully exploit the refining potential of ultrasonic vibrations. The results suggest that if the treatment conditions are controlled properly, up to 20 kg/min of molten metal can be effectively treated using a 2-kW ultrasonic installation equipped with one ceramic sonotrode of 40 to 60 mm in diameter.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Bauxite Residue and Utilization · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. 1.Eskin GI, Eskin DG (2014) Ultrasonic Treatment of Light Alloy Melts, CRC Press, Oxford, p. 346.10.1201/b17270 ↗
2. G.I.Eskin and D.G.Eskin : Ultrason. Sonochem., 2003, vol. 10, pp. 297-301.10.1016/S1350-4177(02)00158-X ↗
3. V. Abramov, O.Abramov, V.Bulgakov, and F.Sommer : Mater. Letters, 1998, vol.37, pp.27-34.10.1016/S0167-577X(98)00064-0 ↗
4. H.K. Feng, S.R. Yu, Y.L. Li, and L.Y. Gong : J.Mater. Process. Technol., 2008, vol. 208, pp. 330-35.10.1016/j.jmatprotec.2007.12.121 ↗
5. S. Komarov and D. Kuznetsov : Int J Refract Metals Hard Mater, 2012, vol.35, pp.76-83.10.1016/j.ijrmhm.2012.04.004 ↗
6. S. Komarov and Y. Ishiwata: Paper Presented at the 13th International Conference on Aluminum Alloys, Pittsburgh, June 3–7, 2012.
7. S. Komarov, K. Oda, Y. Ishiwata, and N. Dezhkunov: Ultrason. Sonochem.,, 2013, vol. 20, pp. 754–61.10.1016/j.ultsonch.2012.10.006 ↗
8. J. Mi, D. Tan, and T.L. Lee: Metall. Mater. Trans. B, 2014. DOI: 10.1007/s11663-014-0256-z.10.1007/s11663-014-0256-z ↗
9. 9.Y. Osawa, S. Takamori, and T. Kimura : Mater. T. JIM, 2007, vol. 48, pp. 2467–75.10.2320/matertrans.F-MRA2007874 ↗
10. Y. Tsunekawa, K. Taga, Y. Fukui, and M. Okumiya : Mater. Sci. Forum, 2010, vol.638-642, pp. 362-67.10.4028/www.scientific.net/MSF.638-642.362 ↗
11. K. Oda, S. Komarov, and Y. Ishiwata : J. Jpn. Inst. Light Met., 2011, vol. 61, pp. 149–54.10.2464/jilm.61.149 ↗
12. C.R. Ho and B. Cantor : Acta Metall Mater, 1995, vol. 43, pp. 3231.10.1016/0956-7151(94)00480-6 ↗
13. K.Nogita, S.D.McDonald, K.Tsujimoto, K.Yasuda K, and A.K.Dahle : J. Electron Microsc 2004, vol.53, pp.361.10.1093/jmicro/dfh048 ↗
14. S.-M. Liang and R. Schmid-Fetzer : Acta Mater. 2014, vol.71, pp.41-56.10.1016/j.actamat.2014.02.042 ↗
15. S.V. Komarov, Y. Ishiwata, and K. Oda: Paper Presented at the 12th International Conference on Aluminum Alloys, Yokohama, September 5–9, 2010.
16. Y. Ishiwata, S. Komarov, and Y. Takeda: Paper Presented at the 13th International Conference on Aluminum Alloys, Pittsburgh, June 3–7, 2012.