journal article·2011-06

Corrosion Behavior of Fe41Co7Cr15Mo14C15B6Y2 Bulk Metallic Glass in Sulfuric Acid Solutions

H. B. Fan, W. Zheng, G. Y. Wang, P. K. Liaw, J. Shen

Publisher page

Abstract

An Fe41Co7Cr15Mo14C15B6Y2 bulk metallic glass with a diameter of 5 mm was prepared with the copper-mold-casting method. The corrosion resistance of this amorphous steel in sulfuric-acid solutions was determined by electrochemical measurements. The passive film formed on the surface of the alloy after immersion in the 0.5-mol/l H2SO4 solution for 1 week was analyzed by X-ray photoelectron spectroscopy (XPS). Electrochemical measurements show that the corrosion resistance of the amorphous steel in the 1 mol/l-H2SO4 solution is superior to a stainless steel (SUS 321), and is almost the same as Ti6Al4V, which shows that the amorphous steel has an excellent corrosion resistance in sulfuric-acid solutions. As the concentration of the sulfuric-acid solutions increases from 0.5 mol/l to 4 mol/l, the corrosion resistance of the amorphous steel decreases. The XPS result reveals that a bilayer structure of protective film formed on the surface of the amorphous steel in a H2SO4 solution. The compositions of the inner part of the film are MoO2, Cr2O3, CoO, and FeO, and those of the outer film are MoO3, Cr(OH)3, Co(OH)2, and Fe(OH)3.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Electromagnetic wave absorption materials · Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. W.H. Peter, R.A. Buchanan, C.T. Liu, P.K. Liaw, M.L. Morrison, J.A. Horton, C.A. Carmichael Jr., and J.L. Wright: Intermetallics, 2002, vol. 10, pp. 1157-62.10.1016/S0966-9795(02)00130-9 ↗
2. R.V. Subba Rao, U. Wolff, S. Baunack, J. Eckert, and A. Gebert: Corros. Sci., 2003, vol. 45, pp. 817-32.10.1016/S0010-938X(02)00131-2 ↗
3. M.L. Morrison, R.A. Buchanan, A. Peker, P.K. Liaw, and J.A. Horton: J. Non-Cryst. Solids, 2007, vol. 353, pp. 2115-24.10.1016/j.jnoncrysol.2007.03.012 ↗
4. S.J. Pang, H. Men, C.H. Shek, C. Ma, A. Inoue, and T. Zhang: Intermetallics, 2007, vol. 15, pp. 683-86.10.1016/j.intermet.2006.10.011 ↗
5. A.P. Wang, X.C. Chang, W.L. Hou, and J.Q. Wang: Corros. Sci., 2007, vol. 49, pp. 2628-35.10.1016/j.corsci.2006.12.017 ↗
6. M. Naka, K. Hashimoto, and T. Masumoto: J. Japan Inst. Metals, 1974, vol. 38, pp. 835-41.10.2320/jinstmet1952.38.9_835 ↗
7. S.J. Pang, T. Zhang, K. Asami, and A. Inoue: Corros. Sci., 2002, vol. 44, pp. 1847-56.10.1016/S0010-938X(02)00002-1 ↗
8. S.J. Pang, T. Zhang, K. Asami, and A. Inoue: J. Mater. Res., 2002, vol. 17, pp. 701-04.10.1557/JMR.2002.0100 ↗
9. M. Naka, K. Hashimoto, and T. Masumoto: J. Non-Cryst. Solids, 1978, vol. 29, pp. 61-65.10.1016/0022-3093(78)90140-0 ↗
10. X.-Y. Li, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto: Corros. Sci., 1999, vol. 41, pp. 1849-69.10.1016/S0010-938X(99)00019-0 ↗
11. D.C. Qiao, B. Green, M. Morrison, and P.K. Liaw: Rev. Adv. Mater. Sci., 2008, vol. 18, pp. 149-53.
12. J. Farmer, J. Haslam, S. Day, T. Lian, C. Saw, P. Hailey, J.-S. Choi, N. Yang, R. Bayles, L. Aprigliano, J. Payer, J. Perepezko, K. Hildal, E. Lavernia, L. Ajdelsztajn, D.J. Branagan, and M.B. Beardsley: Materials Research Society Fall Meeting—Boston, MA, Report Nos. DE2007-900130 and UCRL-PROC-225433, Lawrence Livermore National Laboratory, Livermore, CA, 2006, p. 49.
13. A. Inoue, Y. Shinohara, and J. S. Gook: Mater. Trans. JIM, 1995, vol. 36, pp. 1427-33.10.2320/matertrans1989.36.1427 ↗
14. D.S. Song, J.-H. Kim, E. Fleury, W.T. Kim, and D.H. Kim: J. Alloys Compd., 2005, vol. 389, pp. 159-64.10.1016/j.jallcom.2004.08.014 ↗
15. M. Shapaan, J. Gubicza, J. Lendvai, and L.K. Varga: Mater. Sci. Eng. A, 2004, vol. 375-377A, pp. 785-88.10.1016/j.msea.2003.10.181 ↗
16. A. Šlawska-Waniewska, J.M. Greneche, A. Roig, and A. Inoue: J. Magn. Magn. Mater., 1999, vol. 203, pp. 187-89.10.1016/S0304-8853(99)00223-1 ↗
17. B.L. Shen and A. Inoue: J. Mater. Sci. Lett., 2003, vol. 22, pp. 857-59.10.1023/A:1024490014759 ↗
18. W.J. Botta F., D. Negri, and A.R. Yavari: J. Non-Cryst. Solids, 1999, vol. 247, pp. 19-25.10.1016/S0022-3093(99)00024-1 ↗
19. K. Hildal, N. Sekido, and J.H. Perepezko: Intermetallics, 2006, vol. 14, pp. 898-902.10.1016/j.intermet.2006.01.036 ↗
20. X.J. Gu, A.G. McDermott, S.J. Poon, and G.J. Shiflet: Appl. Phys. Lett., 2006, vol. 88, p. 211905.10.1063/1.2206149 ↗
21. S.J. Poon, G.J. Shiflet, V.M. Keppens, V. Ponnambalam, R. Taylor, and G. Petculescu: Appl. Phys. Lett., 2003, vol. 83, pp. 1131-33.10.1063/1.1598287 ↗
22. J. Shen, Q.J. Chen, J.F. Sun, H.B. Fan, and G. Wang: Appl. Phys. Lett., 2005, vol. 86, p. 151907.10.1063/1.1897426 ↗
23. Q.J. Chen, D.L. Zhang, J. Shen, H.B. Fan, J.F. Sun, and Z.G. Liu: Int. J. Mod. Phys. B, 2006, vol. 20B, pp. 3617-22.10.1142/S0217979206040088 ↗
24. Q.J. Chen, J. Shen, D.L. Zhang, H.B. Fan, and J.F. Sun: J. Mater. Res., 2007, vol. 22, pp. 358-63.10.1557/jmr.2007.0038 ↗
25. K. Asami and K. Hashimoto: Corros. Sci., 1977, vol. 17, pp. 559-70.10.1016/S0010-938X(77)80002-4 ↗
26. S. Ningshen, U. Kamachi Mudali, G. Amarendra, P. Gopalan, R.K. Dayal, and H.S. Khatak: Corros. Sci., 2006, vol. 48, pp. 1106-21.10.1016/j.corsci.2005.05.003 ↗
27. C.N. Cao and J.Q. Zhang: An Introduction to Electrochemical Impedance Spectroscopy, Science Press, Beijing, China, 2002, pp. 26-177.
28. K. Asami, K. Hashimoto, and S. Shimodaira: Corros. Sci., 1976, vol. 16, pp. 35-45.10.1016/S0010-938X(76)80005-4 ↗
29. K. Asami, K. Hashimoto, and S. Shimodaira: Corros. Sci., 1977, vol. 17, pp. 713-23.10.1016/0010-938X(77)90067-1 ↗
30. C.T. Liu and J.K. Wu: Corros. Sci., 2007, vol. 49, pp. 2198-209.10.1016/j.corsci.2006.10.032 ↗
31. P.Y. Park, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto: Corros. Sci., 1996, vol. 38, pp. 1649-67.10.1016/S0010-938X(96)00041-8 ↗
32. K. Hashimoto, K. Asami, A. Kawashima, H. Habazaki, and E. Akiyama: Corros. Sci., 2007, vol. 49, pp. 42-52.10.1016/j.corsci.2006.05.003 ↗
33. X.Z. Yang and W. Yang: Electrochemical Thermodynamics of Metallic Corrosion: Potential- pH Diagrams and Their Application, Chemical Industry Press, Beijing, China, 1991, pp. 197-240.
34. W.A. Badawy and F.M. Al-Kharafi: Electrochim. Acta, 1998, vol. 44, pp. 693-702.10.1016/S0013-4686(98)00180-7 ↗
35. Y.C. Lu and C.R. Clayton: Corros. Sci., 1989, vol. 29, pp. 927-37.10.1016/0010-938X(89)90085-1 ↗