Experimental and Numerical Modeling of Segregation in Metallic Alloys
Source abstract
Abstract
Electromagnetic levitation (EML) has been used as an experimental technique for investigating the effect of the nucleation and cooling rate on segregation and structure formation in metallic alloys. The technique has been applied to aluminum-copper alloys. For all samples, the primary phase nucleation has been triggered by the contact of the levitated droplet with an alumina plate at a given undercooling. Based on the recorded temperature curves, the heat extraction rate and the nucleation undercooling for the primary dendritic and the secondary eutectic structures have been determined. Metallurgical characterizations have consisted of composition measurements using a scanning electron microscope (SEM) equipped with energy dispersive X-ray spectrometry and the analysis of SEM images. The distribution maps drawn for the composition, the volume fraction of the eutectic structure, and the dendrite arm spacing (DAS) reveal strong correlations. Analysis of the measurements with the help of a cellular-automaton (CA)–finite-element (FE) model is also proposed. The model involves a new coupling scheme between the CA and FE methods and a segregation model accounting for diffusion in the solid and liquid phases. Extensive validation of the model has been carried out on a typical equiaxed grain configuration, i.e., considering the free growth of a mushy zone in an undercooled melt. It demonstrates its capability of dealing with mass exchange inside and outside the envelope of a growing primary dendritic structure. The model has been applied to predict the temperature curve, the segregation, and the eutectic volume fraction obtained upon single-grain nucleation and growth from the south pole of a spherical domain with and without triggering of the nucleation of the primary solid phase, thus simulating the solidification of a levitated droplet. Predictions permit a direct interpretation of the measurements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. C. Beckermann: Int. Mater. Rev., 2002, vol. 47, pp. 243–61.10.1179/095066002225006557 ↗
2. D.M. Herlach: Annu. Rev. Mater., 1991, vol. 21, pp. 23–44.10.1146/annurev.ms.21.080191.000323 ↗
3. R. Heringer, Ch.-A. Gandin, G. Lesoult, and H. Henein: Acta Mater., 2006, vol. 54, pp. 4427–40.10.1016/j.actamat.2006.05.015 ↗
4. A. Prasad, H. Henein, and K.T. Conlon: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1589–96.10.1007/s11661-006-0102-2 ↗
5. A. Prasad, S. Mosbah, H. Henein, and Ch.-A. Gandin: ISIJ Int., 2009, vol. 49, pp. 992–99.10.2355/isijinternational.49.992 ↗
6. Ch.-A. Gandin, S. Mosbah, Th. Volkmann, and D.M. Herlach: Acta Mater., 2008, vol. 56, pp. 3023–35.10.1016/j.actamat.2008.02.041 ↗
7. G. Kasperovich, T. Volkmann, L. Ratke, and D. Herlach: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1183–91.10.1007/s11661-008-9505-6 ↗
8. M. Rappaz and Ph. Thévoz: Acta Metall., 1987, vol. 35, pp. 2929–33.10.1016/0001-6160(87)90292-6 ↗
9. C.Y. Wang and C. Beckermann: Metall. Trans. A, 1993, vol. 24A, pp. 2787–2802.10.1007/BF02659502 ↗
10. M.A. Martorano, C. Beckermann, and Ch.-A. Gandin: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1657–74.10.1007/s11661-003-0311-x ↗
11. D. Tourret and Ch.-A. Gandin: Acta Mater., 2009, vol. 57, pp. 2066–79.10.1016/j.actamat.2009.01.002 ↗
12. M. Bellet, H. Combeau, Y. Fautrelle, D. Gobin, M. Rady, E. Arquis, O. Budenkova, B. Dussoubs, Y. Duterrail, A. Kumar, Ch.-A. Gandin, B. Goyeau, S. Mosbah, and M. Založnik: Int. J. Therm. Sci., 2009, vol. 48, pp. 2013–16.10.1016/j.ijthermalsci.2009.07.024 ↗
13. Ch.-A. Gandin and M. Rappaz: Acta Metall., 1994, vol. 42, pp. 2233–46.10.1016/0956-7151(94)90302-6 ↗
14. G. Guillemot, H. Combeau, and Ch.-A. Gandin: ISIJ Int., 2006, vol. 46, pp. 880–95.10.2355/isijinternational.46.880 ↗
15. G. Guillemot, Ch.-A. Gandin, and M. Bellet: Cryst. Growth, 2007, vol. 303, pp. 58–68.10.1016/j.jcrysgro.2006.12.076 ↗
16. H. Yin and J.N. Koster: J. Cryst. Growth, 1999, vol. 205, pp. 590–606.10.1016/S0022-0248(99)00262-6 ↗
17. H. Yin and J.N. Koster: J. Alloys Compd., 2003, vol. 352, pp. 197–209.10.1016/S0925-8388(02)01126-X ↗
18. M. Flemings: Solidification Processing, McGraw Hill, New York, NY, 1974.
19. J. Lacaze and G. Lesoult: ISIJ Int., 1995, vol. 35, pp. 658–64.10.2355/isijinternational.35.658 ↗
20. A. Thirumalai, A. Akhtar, and R.C. Reed: Mater. Sci. Technol., 2006, vol. 22, pp. 1–13.10.1179/174328406X79289 ↗
21. M. Ganesan, L. Thuinet, D. Dye, and P.D. Lee: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 557–66.10.1007/s11663-007-9071-0 ↗
22. N. D’Souza, M. Lekstrom, and H.B. Dong: Mater. Sci. Eng., A, 2008, vol. 490, pp. 258–65.10.1016/j.msea.2008.01.025 ↗
23. S.A. Cefalu and M.J.M Krane: Mater. Sci. Eng., A, 2007, vol. 454, pp. 371–78.10.1016/j.msea.2006.11.060 ↗
24. D. Eskin, Q. Du, D. Ruvalcaba, and L. Katgerman: Mater. Sci. Eng., A, 2005, vol. 405, pp. 1–10.10.1016/j.msea.2005.05.105 ↗
25. J.A. Sarreal and G.J. Abbaschian: Metall. Trans. A, 1986, vol. 17A, pp. 2063–73.10.1007/BF02645003 ↗
26. V.R. Voller and S. Sundarraj: Modeling of Casting, Welding and Advanced Solidification Processes VI, T.S. Piwonka, V. Voller, and L. Katgerman, eds., TMS, Warrendale, PA, 1993, pp. 251–56.
27. D. Herlach, P. Galenko, and D. Holland-Moritz: Metastable Solids from Undercooled Melts: Materials Series D, Pergamon, Oxford, UK, 2007.10.4028/0-87849-428-6.1977 ↗
28. M. Bellet, V.D. Fachinotti, S. Gouttebroze, W. Liu, and H. Combeau: Solidification Processes and Microstructures: Symp. in Honor of Prof. W. Kurz, M. Rappaz, C. Beckermann, and R. Trivedi, eds. TMS, Warrendale, 2004, pp. 41–46.
29. W. Liu: Doctoral Thesis, Ecole Nationale Supérieure des Mines de Paris, Paris, France, 2005.
30. V.R. Voller, A.D. Brent, and C. Prakash: Int. J. Heat Mass. Transf., 1989, vol. 32, pp. 1719–31.10.1016/0017-9310(89)90054-9 ↗
31. M. Fortin: Rev. Eur. Elém. Finis, 2000, vol. 9, pp. 467–86.
32. P. Frey and F. Alauzet: Comp. Meth. Appl. Mech. Eng., 2005, vol. 194, pp. 4864–84.10.1016/j.cma.2004.11.025 ↗
33. M. Hamide, E. Massoni, and M. Bellet: Int. J. Numer. Methods Eng., 2008, vol. 73, pp. 624–41.10.1002/nme.2083 ↗
34. C. Gruau and T. Coupez: Comput. Methods Appl. Mech. Eng., 2005, vol. 194, pp. 4951–76.10.1016/j.cma.2004.11.020 ↗
35. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans Tech Publications, Aedermannsdorf, Switzerland, 1992.
36. G. Ivantsov: Akademii Nauk SSSR, 1947, vol. 81, pp. 179–82.
37. Ch.-A. Gandin, G. Guillemot, A. Appolaire, and N.T. Niane: Mater. Sci. Eng., A, 2003, vol. 342, pp. 44–50.10.1016/S0921-5093(02)00261-7 ↗
38. S. Mosbah, M. Bellet, and Ch.-A. Gandin: Mater. Sci. Forum, in press.
39. S. McFadden, D.J. Browne, and Ch.-A. Gandin: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 662–72.10.1007/s11661-008-9708-x ↗
40. Ch.-A. Gandin, J. Blaizot, S. Mosbah, M. Bellet, G. Zimmermann, L. Sturz, D.J. Browne, S. McFadden, H. Jung, B. Billia, N. Mangelinck, Thi H. Nguyen, Y. Fautrelle, and X. Wang: Mater. Sci. Forum, in press.
41. S. Mosbah, Ch.-A. Gandin, J. Brogly, B. Crozier, Th. Volkmann, and D. Herlach: 5th Decennial Int. Conf. on Solidification Processing, H. Jones, ed., The University of Sheffield, Sheffield, United Kingdom, 2007, pp. 80–85.
42. M.C. Flemings and G.E. Nereo: Trans. AIME, 1967, vol. 239, pp. 1449–61.
43. G. Lesoult, Ch.-A. Gandin, and N.T. Niane: Acta Mater., 2003, vol. 51, pp. 5263–83.10.1016/S1359-6454(03)00379-3 ↗
44. N.T. Niane, Ch.-A. Gandin, and G. Lesoult: Mater. Sci. Forum, 2006, vol. 508, pp. 175–80.10.4028/www.scientific.net/MSF.508.175 ↗