Effect of Cold Rolling on as–ECAP Interstitial Free Steel
Source abstract
Abstract
Ti-stabilized interstitial free steel subjected to eight passes, route BC room temperature equal channel angular pressing (ECAP) additionally was cold rolled (CR) up to 95 pct thickness reduction. Electron back-scattering diffraction and transmission electron microscopy characterized microstructural refinement and microtexture evolution, whereas the mechanical properties were assessed by uniaxial tensile tests. After 95 pct CR, the average high-angle grain boundary spacing reduces to 0.14 μm, whereas the high-angle boundary fraction increases to ~81 pct. The ECAP negative simple shear texture components rotate by ~15 deg around the transverse direction toward the rolling direction for up to 50 pct CR, with typical rolling textures observed at 95 pct CR. The decrease in boundary spacing produces a ~500 MPa gain in 0.2 pct proof stress, a ~600 MPa increase in ultimate tensile strength (UTS), and a ~4 pct loss in total elongation after 95 pct CR. Similar rates of decrease in work hardening correspond to comparable rates of cross and/or multiple slip events irrespective of the processing regime and substructural refinement. The fracture mode of the tensile samples changes from ductile to brittle type between ECAP and 95 pct CR and is attributed to the reduced work hardening capacity of the latter. The modified Hall–Petch equation shows that the convergence of high-angle boundary spacing values with their low-angle counterparts results in an increased contribution via boundary strengthening to the 0.2 pct proof stress and UTS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. B. Han, E. Lavernia, and F. Mohamed: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1343-50.10.1007/s11661-004-0309-z ↗
2. F.D. Torre, A. Gazder, C. Gu, C. Davies, and E. Pereloma: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1080-95.10.1007/s11661-007-9103-z ↗
3. F.D. Torre, R. Lapovok, J. Sandlin, P.F. Thomson, C.H.J. Davies, and E.V. Pereloma: Acta Mater., 2004, vol. 52, no. 16, pp. 4819-32.10.1016/j.actamat.2004.06.040 ↗
4. A.A. Gazder, W. Cao, C.H.J. Davies, and E.V. Pereloma: Mater. Sci. Eng. A, 2008, vol. 497, nos. 1-2, pp. 341-52.10.1016/j.msea.2008.07.030 ↗
5. P.B. Prangnell, J.R. Bowen, and P.J. Apps: Mater. Sci. Eng. A, 2004, vols. 375-377, pp. 178-85.10.1016/j.msea.2003.10.170 ↗
6. P.B. Prangnell, Y. Huang, M. Berta, and P.J. Apps: Mater. Sci. Forum., 2007, vol. 550, p. 159.10.4028/www.scientific.net/MSF.550.159 ↗
7. K. Furuno, H. Akamatsu, K. Oh-ishi, M. Furukawa, Z. Horita, and T.G. Langdon: Acta Mater., 2004, vol. 52, no. 9, pp. 2497-2507.10.1016/j.actamat.2004.01.040 ↗
8. T. Langdon, M. Furukawa, M. Nemoto, and Z. Horita: JOM, 2000, vol. 52, no. 4, pp. 30-33.10.1007/s11837-000-0128-7 ↗
9. K. Oh-Ishi, Z. Horita, M. Nemoto, M. Furukawa, and T. Langdon: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2011-13.10.1007/s11661-998-0027-z ↗
10. R.Z. Valiev and T.G. Langdon: Progr. Mater. Sci., 2006, vol. 51, no. 7, pp. 881-981.10.1016/j.pmatsci.2006.02.003 ↗
11. T. Hebesberger, H.P. Stüwe, A. Vorhauer, F. Wetscher, and R. Pippan: Acta Mater., 2005, vol. 53, no. 2, pp. 393-402.10.1016/j.actamat.2004.09.043 ↗
12. H. Jazaeri and F.J. Humphreys: Acta Mater., 2004, vol. 52, no. 11, pp. 3239-50.10.1016/j.actamat.2004.03.030 ↗
13. N. Kamikawa, T. Sakai, and N. Tsuji: Acta Mater., 2007, vol. 55, no. 17, pp. 5873-88.10.1016/j.actamat.2007.07.002 ↗
14. R. Pippan, F. Wetscher, M. Hafok, A. Vorhauer, and I. Sabirov: Adv. Eng. Mater., 2006, vol. 8, no. 11, pp. 1046-56.10.1002/adem.200600133 ↗
15. A. Vorhauer and R. Pippan: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 417-29.10.1007/s11661-007-9413-1 ↗
16. Y. Huang and P.B. Prangnell: Acta Mater., 2008, vol. 56, no. 7, pp. 1619-32.10.1016/j.actamat.2007.12.017 ↗
17. A.P. Zhilyaev, B.K. Kim, G.V. Nurislamova, M.D. Baró, J.A. Szpunar, and T.G. Langdon: Scripta Mater., 2002, vol. 46, no. 8, pp. 575-80.10.1016/S1359-6462(02)00018-0 ↗
18. Y. Fukuda, K. Oh-ishi, Z. Horita, and T.G. Langdon: Acta Mater., 2002, vol. 50, no. 6, pp. 1359-68.10.1016/S1359-6454(01)00441-4 ↗
19. Y.M. Wang and E. Ma: Acta Mater., 2004, vol. 52, no. 6, pp. 1699-709.10.1016/j.actamat.2003.12.022 ↗
20. A.P. Zhilyaev, J. Gubicza, S. Surinach, M.D. Baro, and T.G. Langdon: Mater. Sci. Forum., 2003, vols. 426-32, pp. 4507-12.10.4028/www.scientific.net/MSF.426-432.4507 ↗
21. S. Ferrasse, V.M. Segal, and F. Alford: Mater. Sci. Eng. A, 2004, vol. 372, no. 1-2, pp. 44-55.10.1016/j.msea.2003.09.076 ↗
22. J. Kusnierz, W. Baliga, and J. Bogucka: XIX Conference on Applied Crystallography, World Science Publishing. Co., Warsaw, Poland, 2003, pp. 181-84.
23. M. Furukawa, Z. Horita, M. Nemoto, R.Z. Valiev, and T.G. Langdon: Acta Mater., 1996, vol. 44, no. 11, pp. 4619-29.10.1016/1359-6454(96)00105-X ↗
24. M. Furukawa, Y. Iwahashi, Z. Horita, M. Nemoto, N.K. Tsenev, R.Z. Valiev, and T.G. Langdon: Acta Mater., 1997, vol. 45, no. 11, pp. 4751-57.10.1016/S1359-6454(97)00120-1 ↗
25. R.Z. Valiev, Y.V. Ivanisenko, E.F. Rauch, and B. Baudelet: Acta Mater., 1996, vol. 44, no. 12, pp. 4705-12.10.1016/S1359-6454(96)00156-5 ↗
26. R.Z. Valiev, E.V. Kozlov, Y.F. Ivanov, J. Lian, A.A. Nazarov, and B. Baudelet: Acta Metall. Mater., 1994, vol. 42, no. 7, pp. 2467-75.10.1016/0956-7151(94)90326-3 ↗
27. J. Wang, Y. Iwahashi, Z. Horita, M. Furukawa, M. Nemoto, R.Z. Valiev, and T.G. Langdon: Acta Mater., 1996, vol. 44, no. 7, pp. 2973-82.10.1016/1359-6454(95)00395-9 ↗
28. N. Hansen: Scripta Mater., 2004, vol. 51, no. 8, pp. 801-06.10.1016/j.scriptamat.2004.06.002 ↗
29. S. Li, A.A. Gazder, I.J. Beyerlein, E.V. Pereloma, and C.H.J. Davies: Acta Mater., 2006, vol. 54, no. 4, pp. 1087-1100.10.1016/j.actamat.2005.10.042 ↗
30. F.J. Humphreys: J. Micro., 1999, vol. 195, no. 3, pp. 170-85.10.1046/j.1365-2818.1999.00578.x ↗
31. R. Hielscher and H. Schaeben: J. App. Cryst., 2008, vol. 41, no. 6, pp. 1024-37.10.1107/S0021889808030112 ↗
32. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon Press, Oxford, UK, 1995.
33. B.L. Li, A. Godfrey, Q.C. Meng, Q. Liu, and N. Hansen: Acta Mater., 2004, vol. 52, no. 4, pp. 1069-81.10.1016/j.actamat.2003.10.040 ↗
34. D.A. Hughes: Mater. Sci. Eng. A, 2001, vols. 319-21, pp. 46-54.10.1016/S0921-5093(01)01028-0 ↗
35. S. Li, A.A. Gazder, I.J. Beyerlein, C.H.J. Davies, and E.V. Pereloma: Acta Mater., 2007, vol. 55, no. 3, pp. 1017-32.10.1016/j.actamat.2006.09.022 ↗
36. S. Li and I.J. Beyerlein: Model. Siml. Mater. Sci. Eng., 2005, vol. 13, no. 4, pp. 509-30.10.1088/0965-0393/13/4/003 ↗
37. A. Belyakov, K. Tsuzaki, Y. Kimura, Y. Kimura, and Y. Mishima: Mater. Sci. Eng. A, 2007, vol. 456, nos. 1-2, pp. 323-31.10.1016/j.msea.2006.12.063 ↗
38. G.E. Dieter: Mechanical Metallurgy, McGraw-Hill, Boston, MA, 1986.
39. Y. Ding, J. Jiang, and A. Shan: J. Alloy Compd., 2009, vol. 487, nos. 1–2, pp. 517-21.10.1016/j.jallcom.2009.08.004 ↗
40. D. Jia, K.T. Ramesh, and E. Ma: Acta Mater., 2003, vol. 51, no. 12, pp. 3495-3509.10.1016/S1359-6454(03)00169-1 ↗
41. Y. Estrin, K. Rhee, R. Lapovok, and P.F. Thomson: J. Eng. Mater. Tech., 2007, vol. 129, no. 3, pp. 380-89.10.1115/1.2744396 ↗
42. B. Han, F. Mohamed, and E. Lavernia: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 71-83.10.1007/s11661-003-0209-7 ↗
43. J.E. Carsley, W.W. Milligan, X.H. Zhu, and E.C. Aifantis: Scripta Mater., 1997, vol. 36, no. 6, pp. 727-32.10.1016/S1359-6462(96)00443-5 ↗
44. S. Tamimi, M. Ketabchi, and N. Parvin: Mater. Des., 2009, vol. 30, no. 7, pp. 2556-62.10.1016/j.matdes.2008.09.039 ↗
45. D.T.A. Matthews, V. Ocelík, P.M. Bronsveld, and J.T.M. De Hosson: Acta Mater., 2008, vol. 56, no. 8, pp. 1762-73.10.1016/j.actamat.2007.12.029 ↗
46. R.Y. Lapovok: J. Mater. Sci., 2005, vol. 40, no. 2, pp. 341-46.10.1007/s10853-005-6088-0 ↗
47. E.O. Hall: Proc. Phys. Soc. B, 1951, vol. 64, pp. 747-53.10.1088/0370-1301/64/9/303 ↗
48. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25-28.
49. M. Reihanian, R. Ebrahimi, M.M. Moshksar, D. Terada, and N. Tsuji: Mater. Charact., 2008, vol. 59, no. 9, pp. 1312-23.10.1016/j.matchar.2007.11.006 ↗
50. Q. Liu, X. Huang, D.J. Lloyd, and N. Hansen: Acta Mater., 2002, vol. 50, no. 15, pp. 3789-02.10.1016/S1359-6454(02)00174-X ↗
51. D.A. Hughes and N. Hansen: Acta Mater., 2000, vol. 48, no. 11, pp. 2985-3004.10.1016/S1359-6454(00)00082-3 ↗
52. N. Kamikawa, X. Huang, N. Tsuji, and N. Hansen: Acta Mater., 2009, vol. 57, no. 14, pp. 4198-208.10.1016/j.actamat.2009.05.017 ↗
53. S. Takaki, K. Kawasaki, and Y. Kimura: J. Mater. Pro. Tech., 2001, vol. 117, no. 3, pp. 359-63.10.1016/S0924-0136(01)00797-X ↗