Strength Recovery in a High-Strength Steel During Multiple Weld Thermal Simulations
Source abstract
Abstract
BlastAlloy 160 (BA160) is a low-carbon martensitic steel strengthened by copper and M2C precipitates. Heat-affected zone (HAZ) microstructure evaluation of BA160 exhibited softening in samples subjected to the coarse-grained HAZ thermal simulations of this steel. This softening is partially attributed to dissolution of copper precipitates and metal carbides. After subjecting these coarse-grained HAZs to a second weld thermal cycle below the Ac1 temperature (at which austenite begins to form on heating), recovery of strength was observed. Atom-probe tomography and microhardness analyses correlated this strength recovery to re-precipitation of copper precipitates and metal carbides. A continuum model is proposed to rationalize strengthening and softening in the HAZ regions of BlastAlloy 160.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Advanced Materials Characterization Techniques · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. A. Saha and G.B. Olson: J. Comput. Aided Mater. Des., 2007, vol. 14, pp. 177–200.10.1007/s10820-006-9031-z ↗
2. A. Saha and G.B. Olson: J. Comput. Aided Mater. Des., 2007, vol. 14, pp. 201–33.10.1007/s10820-006-9032-y ↗
3. E.J. Czyryca, D.P. Kihl, and R. DeNale: AMPTIAC Q., 2003, vol. 7 (3), pp. 63–70.
4. R.D. Campbell and D.W. Walsh: ASM Handbook, ASM, Material Park, OH, 1993, vol. 6, pp. 603–13.
5. C. Jeremy: Ph.D. Thesis, The Ohio State University, Columbus, OH, 2010.
6. X. Yu, J.L. Caron, S.S. Babu, J.C. Lippold, D. Isheim, and D.N. Seidman: Acta Mater., 2010, vol. 58, pp. 5596–5609.10.1016/j.actamat.2010.06.031 ↗
7. ASTM E-384-08, ASTM, Philadelphia, PA, 2008.
8. M.K. Miller: Atom Probe Tomography, Kluwer Academic/Plenum Publishers, New York, NY, 2000.10.1007/978-1-4615-4281-0 ↗
9. D. Isheim, R.P. Kolli, M.E. Fine, and D.N. Seidman: Scripta Mater., 2006, vol. 55, pp. 35–40.10.1016/j.scriptamat.2006.02.040 ↗
10. R.P. Kolli, R.M. Wojes, S. Zaucha, and D.N. Seidman: Int. J. Mater. Res., 2008, vol. 99, pp. 513–27.10.3139/146.101662 ↗
11. R.P. Kolli and D.N. Seidman: Acta Mater., 2008, vol. 56, pp. 2073–88.10.1016/j.actamat.2007.12.044 ↗
12. R.P. Kolli and D.N. Seidman: Microsc. Microanal., 2007, vol. 13, pp. 272–84.10.1017/S1431927607070675 ↗
13. O.C. Hellman, J.A. Vandenbroucke, J. Rusing, D. Isheim, and D.N. Seidman: Microsc. Microanal., 2000, vol. 6, pp. 437–44.10.1007/S100050010051 ↗
14. M. Mulholland and D.N. Seidman: Scripta Mater., 2009, vol. 60, pp. 992–95.10.1016/j.scriptamat.2009.02.033 ↗
15. J.O. Andersson et al.: CALPHAD, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
16. C.B. Fuller, D.N. Seidman, and D.C. Dunand: Acta Mater., 2003, vol. 51, p. 4803–14.10.1016/S1359-6454(03)00320-3 ↗
17. D.N. Seidman, E.A. Marquis, and D.C. Dunand: Acta Mater., 2002, vol. 50, pp. 4021–35.10.1016/S1359-6454(02)00201-X ↗
18. J.H. Beatty and G.J. Shiflet: Metall. Trans. A, 1988, vol. 19A, pp. 1617–20.10.1007/BF02674037 ↗
19. R. Monzen, M.L. Jenkins, and A.P. Sutton: Philos. Mag. A, 2000, vol. 80, pp. 711–23.10.1080/01418610008212077 ↗
20. N. Maruyama, M. Sugiyama, T. Hara, and H. Tamehiro: JIM, 1999, vol. 40, pp. 268–77.
21. D. Isheim, M.E. Fine, and D.N. Seidman: Microsc. Microanal., 2007, vol. 13, pp. 1624–25.
22. S. Morito and T. Ohba: Proc. 1st Int. Symp. on Steel Sci., 2007, pp. 57–62
23. J. Syarif, T. Tsuchiyama, and S. Takaki: ISIJ Int., 2003, vol. 7, pp. 1100–04.10.2355/isijinternational.43.1100 ↗
24. A. Thorvaldsen: Acta Mater., 1997, vol. 45, pp. 595–600.10.1016/S1359-6454(96)00198-X ↗
25. J.P. Naylor: Metall. Trans. A, 1979, vol. 10A, pp. 861–73.10.1007/BF02658305 ↗
26. S. Morito, H. Yoshida, T. Maki, and X. Huang: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 237–40.10.1016/j.msea.2005.12.048 ↗
27. E. Nembach: Particle Strengthening of Metals and Alloys, John Wiley & Sons, New York, NY, 1997.
28. A.S. Argon: Strengthening Mechanisms in Crystal Plasticity, Oxford University Press, New York, NY, 2008.10.1093/acprof:oso/9780198516002.001.0001 ↗
29. M.E. Fine and D. Isheim: Scripta Mater., 2005, vol. 53, pp. 115–18.10.1016/j.scriptamat.2005.02.034 ↗
30. J.Z. Liu, A. Van de Walle, G. Ghosh, and M. Asta: Phys. Rev. B, 2005, vol. 72, p. 144109.10.1103/PhysRevB.72.144109 ↗
31. K.C. Russell and L.M. Brown: Acta Metall., 1972, vol. 20, pp. 969–74.10.1016/0001-6160(72)90091-0 ↗
32. P.J. Craievich, N. Weinert, J.M. Sanchez, and R.E. Watson: Phys. Rev. Lett., 1994, vol. 72, pp. 3076–79.10.1103/PhysRevLett.72.3076 ↗
33. L.G. Wang, M. Sob, and Z. Zhang: J. Phys. Chem. Solids, 2003, vol. 64, pp. 863–72.10.1016/S0022-3697(02)00420-1 ↗
34. T. Harry and D.J. Bacon: Acta Mater., 2002, vol. 50, pp. 195–208.10.1016/S1359-6454(01)00331-7 ↗
35. S.S. Babu: Int. Mater. Rev., 2009, vol. 54, pp. 333–36.10.1179/095066009X12506720908654 ↗