journal article·2015-06Open access

Influence of Plastic Deformation on Low-Temperature Surface Hardening of Austenitic Stainless Steel by Gaseous Nitriding

Federico Bottoli, Grethe Winther, Thomas L. Christiansen, Marcel A. J. Somers

Abstract

This article addresses an investigation of the influence of plastic deformation on low-temperature surface hardening by gaseous nitriding of two commercial stainless steels: EN 1.4369 and AISI 304. The materials were plastically deformed to several levels of equivalent strain by conventional tensile straining, plane strain compression, and shear. Gaseous nitriding of the strained material was performed in ammonia gas at atmospheric pressure at various temperatures. Microstructural characterization of the as-deformed state and the nitrided case produced included X-ray diffraction analysis, reflected-light microscopy, and microhardness testing. The results demonstrate that a case of expanded austenite develops and that the presence of plastic deformation has a significant influence on the morphology of the nitrided case. The presence of strain-induced martensite favors the formation of CrN, while a high dislocation density in a fully austenitic structure does not lead to such premature nucleation of CrN.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Surface Treatment and Residual Stress · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Z.I. Zhang and T. Bell: Surf. Eng., 1985, vol. 1, pp. 131–36.10.1179/sur.1985.1.2.131 ↗
2. T. Bell, K. Mao, and Y. Sun: Surf. Coat. Technol., 1998, vol. 108–109, pp. 360–68.10.1016/S0257-8972(98)00623-9 ↗
3. J.W. Simmons: Mater. Sci. Eng. A, 1996, vol. 207, pp. 159–69.10.1016/0921-5093(95)09991-3 ↗
4. R.P. Reed: JOM, 1989, vol. 41, pp. 16–21.10.1007/BF03220991 ↗
5. D.L. Williamson, O. Ozturk, R. Wei, and P.J. Wilbur: Surf. Coat. Technol., 1994, vol. 65, pp. 15–23.10.1016/S0257-8972(94)80003-0 ↗
6. Z. Yu, X. Xu, L. Wang, J. Qiang, and Z. Hei: Surf. Coat. Technol., 2002, vol. 153, pp. 125–30.10.1016/S0257-8972(01)01670-X ↗
7. X. Xu, L. Wang, Z. Yu, J. Qiang, and Z. Hei: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1193–99.10.1007/s11661-000-0115-1 ↗
8. H. Dong: Int. Mater. Rev., 2010, vol. 55, pp. 65–98.10.1179/095066009X12572530170589 ↗
9. T.L. Christiansen and M.A.J. Somers: Int. J. Mater. Res. Former. Zeitschrift Fuer Met., 2009, vol. 100, pp. 1361–77.10.3139/146.110202 ↗
10. T.L. Christiansen, T.S. Hummelshøj, and M.A.J. Somers: Surf. Eng., 2010, vol. 26, pp. 242–47.10.1179/026708410X12506870724316 ↗
11. T.L. Christiansen and M.A.J. Somers: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 675–82.10.1007/s11661-006-0039-5 ↗
12. Y. Cao, F. Ernst, and G.M Michal: Acta Mater., 2003, vol. 51, pp. 4171–81.10.1016/S1359-6454(03)00235-0 ↗
13. Y. Sun and T. Bell: Wear, 1998, vol. 218, pp. 34–42.10.1016/S0043-1648(98)00199-9 ↗
14. C.X. Li, and T. Bell: Corros. Sci., 2004, vol. 46, pp. 1527–47.10.1016/j.corsci.2003.09.015 ↗
15. M.K. Lei and X.M. Zhu: Surf. Coat. Technol., 2005, vol. 193, pp. 22–28.10.1016/j.surfcoat.2004.08.139 ↗
16. W. Liang, X. Bin, Y. Zhiwei, and S. Yaqin: Surf. Coat. Technol., 2000, vol. 130, pp. 304–308.10.1016/S0257-8972(00)00713-1 ↗
17. T. Thiriet, T. Czerwiec, D. Hertz, G. Marcos, T. Toll-Duchanoy, S. Migot, B. Brugier, M. Foucault, and T. Belmonte: Defect Diffus. Forum, 2012, vol. 323-325, pp. 471–76.10.4028/www.scientific.net/DDF.323-325.471 ↗
18. M. Chemkhi, D. Retraint, A. Roos, C. Garnier, L. Waltz, C. Demangel, and G. Proust: Surf. Coat. Technol., 2013, vol. 221, pp. 191–95.10.1016/j.surfcoat.2013.01.047 ↗
19. T. Balusamy, T.S.N. Sankara Narayanan, K. Ravichandran, I.S. Park, and M.H. Lee: Corros. Sci., 2013, vol. 74, pp. 332–44.10.1016/j.corsci.2013.04.056 ↗
20. Standard Test Methods for Tension Testing of Metallic Materials, E8M-04: ASTM International, United States, 2013.
21. J. Post: Report RFSR-CT-2012-00021, Drachten/Netherlands, 2013, p. D 3.1.
22. G.W. Rowe: Elements of Metalworking Theory, Hodder Arnold, London, 1979, p. 144.
23. Th.H. de Keijser, J.I. Langford, E.J. Mittemeijer, and B.P. Vogels: J. Appl. Crystallogr., 1982, vol. 15, pp. 308–14.10.1107/S0021889882012035 ↗
24. J.I. Langford: J. Appl. Crystallogr., 1978, vol. 11, pp. 10–14.10.1107/S0021889878012601 ↗
25. C. Templier, J.C. Stinville, P. Villechaise, P.O. Renault, G. Abrasonis, J.P. Rivière, A. Martinavičius, and M. Drouet: Surf. Coat. Technol., 2010, vol. 204, pp. 2551–58.10.1016/j.surfcoat.2010.01.041 ↗
26. J.O. Nilsson, A. Hultin Stigenberg, and P. Liu: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2225–33.10.1007/BF02652323 ↗
27. T.L. Christiansen, K. V. Dahl, and M.A.J. Somers: Mater. Sci. Technol., 2008, vol. 24, pp. 159–67.10.1179/026708307X232901 ↗
28. T.L. Christiansen, and M.A.J. Somers: Metall. Mater. Trans. A, 2008, vol. 40A, pp. 1791–98.
29. F.A.P. Fernandes, T.L. Christiansen, and M.A.J. Somers: Adv. Mater. Res., 2014, vol. 996, pp. 155–61.10.4028/www.scientific.net/AMR.996.155 ↗
30. J.L. Meijering: Acta Metall., 1966, vol. 14, pp. 251–58.10.1016/0001-6160(66)90081-2 ↗
31. K. H. Jack: Acta Crystallogr., 1952, vol. 5, pp. 404–11.10.1107/S0365110X52001258 ↗
32. R. Hales and A.C. Hill: Met. Sci., 1977, vol. 11, pp. 241–44.10.1179/msc.1977.11.7.241 ↗
33. J.R.G. Da Silva and R.B. McLellan: Mater. Sci. Eng., 1976, vol. 26, pp. 83–87.10.1016/0025-5416(76)90229-9 ↗
34. K.H. Jack: R. Soc., 1951, vol. 208, pp. 200–15.10.1098/rspa.1951.0154 ↗
35. M.A.J. Somers, R.M. Lankreijer, and E.J. Mittemeijer: Philos. Mag. A, 1989, vol. 59, pp. 353–78.10.1080/01418618908205064 ↗