journal article·2013-03

Texture Evolution of Nanostructured Aluminum/Copper Composite Produced by the Accumulative Roll Bonding and Folding Process

Mohammad Reza Toroghinejad, Roohollah Jamaati, Majid Hoseini, Jerzy A. Szpunar, Jan Dutkiewicz

Publisher page

Abstract

In this study, the accumulative roll bonding and folding (ARBF) process was used for manufacturing nanostructured aluminum/copper multilayered composites. Textural evolution during the ARBF process of composites was evaluated using X-ray diffraction. Microstructural observation of some samples was evaluated by scanning electron microscopy and transmission electron microscopy. The ARBF process induced formation of a strong preferred orientation along the β-fiber and also to the pronounced copper texture component. In the aluminum side, occurrence of dynamic recovery reduced the intensity of the β-fiber rolling texture due to change in dislocation structure and decrease in the degree of strain hardening. On the other hand, occurrence of discontinuous dynamic recrystallization at the third and fourth ARBF cycles led to decreasing the intensity of fibers and texture components in the copper side. The average grain sizes of the final sample for the copper and aluminum sides were ~50 and ~200 nm, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. D. Yang, P. Cizek, P. Hodgson, and C. Wen: Scripta Mater., 2010, vol. 62, pp. 321–24.10.1016/j.scriptamat.2009.11.036 ↗
2. J. McKeown, A. Misra, H. Kung, R.G. Hoagland, and M. Nastasi: Scripta Mater., 2002, vol. 46, pp. 593–98.10.1016/S1359-6462(02)00036-2 ↗
3. A.K. Srivastava, K. Yu-Zhang, L. Kilian, J.M. Frigerio, and J. Rivory: J. Mater. Sci., 2007, vol. 42, pp. 185–90.10.1007/s10853-006-1050-3 ↗
4. M. Eizadjou, A. Kazemi Talachi, H. Danesh Manesh, H. Shakur Shahabi, and K. Janghorban: Compos. Sci. Technol., 2008, vol. 68, pp. 2003–09.10.1016/j.compscitech.2008.02.029 ↗
5. K.X. Wei, W. Wei, Q.B. Du, and J. Hu: Mater. Sci. Eng. A, 2009, vol. 525, pp. 55–59.10.1016/j.msea.2009.06.028 ↗
6. K. Wu, H. Chang, E. Maawad, W.M. Gan, H.G. Brokmeier, and M.Y. Zheng: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3073–78.10.1016/j.msea.2010.02.001 ↗
7. G. Min, J.M. Lee, S.B. Kang, and H.W. Kim: Mater. Lett., 2006, vol. 60, pp. 3255–59.10.1016/j.matlet.2006.03.001 ↗
8. S. Ohsaki, S. Kato, N. Tsuji, T. Ohkubo, and K. Hono: Acta Mater., 2007, vol. 55, pp. 2885–95.10.1016/j.actamat.2006.12.027 ↗
9. P.H. Shingu, K.N. Ishihara, A. Otsuki, and I. Daigo: Mater. Sci. Eng. A, 2001, vols. 304–306, pp. 399–402.10.1016/S0921-5093(00)01516-1 ↗
10. K. Yasuna, M. Terauchi, A. Otsuki, K.N. Ishihara, and P.H. Shingu: Mater. Sci. Eng. A, 2000, vol. 85, pp. 412–17.10.1016/S0921-5093(00)00680-8 ↗
11. J.G. Luo and V. Acoff: Mater. Sci. Eng. A, 2004, vol. 379, pp. 164.10.1016/j.msea.2004.01.021 ↗
12. J.G. Luo and V. Acoff: Mater. Sci. Eng. A, 2006, vol. 433, pp. 334.10.1016/j.msea.2006.06.120 ↗
13. G.P. Dinda, H. Rosner, and G. Wilde: Mater. Sci. Eng. A, 2005, vols. 410–411, pp. 328–31.10.1016/j.msea.2005.08.091 ↗
14. G.P. Dinda, H. Rosner, and G. Wilde: Scripta Mater., 2005, vol. 52, pp. 577–82.10.1016/j.scriptamat.2004.11.034 ↗
15. R. Jamaati, M.R. Toroghinejad, J. Dutkiewicz, and J.A. Szpunar: Mater. Des., 2012, vol. 35, pp. 37–42.10.1016/j.matdes.2011.09.040 ↗
16. R. Jamaati and M.R. Toroghinejad: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7430–35.10.1016/j.msea.2010.08.038 ↗
17. R. Jamaati and M.R. Toroghinejad: Mater. Des., 2010, vol. 31, pp. 4816–22.10.1016/j.matdes.2010.04.048 ↗
18. R. Jamaati and M.R. Toroghinejad: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4146–51.10.1016/j.msea.2010.03.070 ↗
19. M. Raei, M.R. Toroghinejad, R. Jamaati, and J.A. Szpunar: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7068–73.10.1016/j.msea.2010.07.089 ↗
20. R. Jamaati, M.R. Toroghinejad, M. Hoseini, and J.A. Szpunar: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3573–80.10.1016/j.msea.2011.01.056 ↗
21. R. Jamaati, M.R. Toroghinejad, M. Hoseini, and J.A. Szpunar: Mater. Sci. Technol., 2012, vol. 28, pp. 406–10.10.1179/1743284711Y.0000000073 ↗
22. H. Chang, M.Y. Zheng, W.M. Gan, K. Wu, E. Maawad, and H.G. Brokmeier: Scripta Mater., 2009, vol. 61, pp. 717–20.10.1016/j.scriptamat.2009.06.014 ↗
23. C.P. Heason and P.B. Prangnell: Mater. Sci. Forum, 2002, vols. 408–412, pp. 733–38.10.4028/www.scientific.net/MSF.408-412.733 ↗
24. H.W. Kim, S.B. Kang, N. Tsuji, and Y. Minamino: Acta Mater., 2005, vol. 53, pp. 1737–49.10.1016/j.actamat.2004.12.022 ↗
25. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier Science Ltd., Oxford, U.K., 2004.
26. L. Chen, Q. Shi, D. Chen, S. Zhou, J. Wang, and X. Luo: Mater. Sci. Eng. A, 2009, vol. 508, pp. 37–42.10.1016/j.msea.2008.12.018 ↗
27. M. Shaarbaf and M.R. Toroghinejad: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1693–1700.10.1007/s11661-009-9851-z ↗
28. S.G. Chowdhury, A. Dutta, B. Ravikumar, and A. Kumar: Mater. Sci. Eng. A, 2006, vol. 428, pp. 351–57.10.1016/j.msea.2006.05.055 ↗
29. S. Pasebani, M.R. Toroghinejad, M. Hosseini, and J. Szpunar: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2050–56.10.1016/j.msea.2010.01.005 ↗
30. D.A. Hughes and N. Hansen: Acta Mater., 2000, vol. 48, pp. 2985–3004.10.1016/S1359-6454(00)00082-3 ↗
31. N. Hansen, X. Huang, and D.A. Hughes: Mater. Sci. Eng. A, 2001, vol. 317, pp. 3–11.10.1016/S0921-5093(01)01191-1 ↗
32. W.C. Liu, C.S. Man, and D. Raabe: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1249–54.10.1016/j.msea.2009.09.059 ↗
33. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul Jensen, M.E. Kassner, W.E. King, T.R. McNelly, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
34. F. Heidelbach, H.R. Wenk, and S.R. Chen: Mater. Sci. Eng. A, 1996, vol. 215, pp. 39–49.10.1016/0921-5093(96)10264-1 ↗
35. J. Hirsch and K. Lucke: Acta Metall., 1988, vol. 36, pp. 2863–82.10.1016/0001-6160(88)90172-1 ↗
36. M.R. Toroghinejad, F. Ashrafizadeh, R. Jamaati, M. Hoseini, and J.A. Szpunar: Mater. Sci. Eng. A, 2012, vol. 556, pp. 351–57.10.1016/j.msea.2012.06.098 ↗