journal article·2009-04

Nb-Base FS-85 Alloy as a Candidate Structural Material for Space Reactor Applications: Effects of Thermal Aging

Keith J. Leonard, Jeremy T. Busby, David T. Hoelzer, Steven J. Zinkle

Publisher page

Abstract

The proposed uses of fission reactors for manned or deep space missions have typically relied on the potential use of refractory metal alloys as structural materials. Throughout the history of these programs, a leading candidate has been Nb-1Zr, due to its good fabrication and welding characteristics. However, the less-than-optimal creep resistance of this alloy has encouraged interest in the more complex FS-85 (Nb-28Ta-10W-1Zr) alloy. Despite this interest, only a relatively small database exists for the properties of FS-85. Database gaps include the potential microstructural instabilities that can lead to mechanical property degradation. In this work, changes in the microstructure and mechanical properties of FS-85 were investigated following 1100 hours of thermal aging at 1098, 1248, and 1398 K. The changes in electrical resistivity, hardness, and tensile properties between the as-annealed and aged materials are compared. Evaluation of the microstructural changes was performed through optical microscopy (OM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The development of intragranular and grain-boundary precipitation of Zr-rich compounds as a function of aging temperature was followed. Brittle tensile behavior was measured in the material aged at 1248 K, while ductile behavior occurred in samples aged above and below this temperature. The effect of temperature on the under- and overaging of the grain-boundary particles is believed to have contributed to the mechanical property behavior of the aged materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fusion materials and technologies · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. L.J. Pionke and J.W. Davis: Technical Assessment of Niobium Alloys Data Base for Fusion Reactor Applications, McDonnell Douglas Report No. C00-4247-2, 1979.10.2172/5419637 ↗
2. J.T. Busby and K.J. Leonard: JOM, 2007, vol. 59 (4), pp. 20–26.10.1007/s11837-007-0049-9 ↗
3. C.C. Wojcik: Mater. Res. Soc. Symp. Proc., 1994, vol. 322, pp. 519–30.10.1557/PROC-322-519 ↗
4. K.J. Leonard, C.E. Duty, S.J. Zinkle, R.F. Luther, R.E. Gold, and R.W. Buckman: Proc. Space Nuclear Conf., San Diego, CA, 2005, pp. 286–93.
5. J.A. Horak and L.K. Egner: Creep Properties of Nb-1Zr and Nb-1Zr-0.1C, ORNL-6809, Oak Ridge National Laboratory, Oak Ridge, TN, 1994.
6. Technical Publication on Nb and Nb-Alloy Products, Wah Chang, Albany, OR, 2006.
7. S.J. Zinkle: Fusion Materials Semi-Annual Report, DOE/ER-0313/27, 1999, pp. 175–82.
8. D.J. Senor and J.A. Horak: Material Property Correlations for W-25Re, Mo-50Re and ASTAR-811C, unpublished report, 1989, pp. 1–207.
9. E.J. Delgrosso, C.E. Carlson, and J.J. Kaminsky: J. Less Common Met., 1967, vol. 12, pp. 173–201.10.1016/0022-5088(67)90114-2 ↗
10. Materials Handbook for SP-100, Document No. 23A3181, rev. 0, 1988.
11. R.H. Titran and M. Uz: Effects of Thermomechanical Processing on the Microstructure and Mechanical Properties of Nb-1Zr-C Alloys, NASA Technical Memorandum 107207, 1993.
12. R.L. Stephenson: J. Less Common Met., 1968, vol. 15 (3), pp. 395–402.10.1016/0022-5088(68)90105-7 ↗
13. D.M. Farkas and A.K. Mukherjee: J. Mater. Res., 1996, vol. 11 (9), pp. 2198–2205.10.1557/JMR.1996.0279 ↗
14. G.G. Lessmann: The Weldability of Refractory Metal Alloys, WANL-PR-P-013 Report, Westinghouse Astronuclear Laboratory, Pittsburgh, PA, 1969.
15. R.L. Stephenson: Creep-Rupture Properties of FS-85 Alloy and Their Response to Heat Treatment, ORNL-TM-1456, Oak Ridge National Laboratory, Oak Ridge, TN, 1966.10.2172/4521067 ↗
16. R.H. Titran and R.W. Hall: High-Temperature Creep Behavior of a Columbium Alloy, FS-85, NASA Technical Note D-2885, 1965.
17. R.H. Titran and R.W. Hall: Ultrahigh-Vacuum Creep Behavior of Columbium and Tantalum Alloys at 2000 and 2200 °F for Times Greater Than 1000 Hours, NASA Technical Note D-3222, 1965.
18. G.G. Lessmann and R.E. Gold: Thermal Stability of Refractory Metal Alloys, NASA-SP-245 Report, Westinghouse Astronuclear Laboratory, Pittsburgh, PA, 1970.10.2172/4718480 ↗
19. T.A. Moss: Nuclear Applications, 1967, vol. 3, pp. 71–81.10.13182/NT67-A27804 ↗
20. R.G. Frank: AIME Symposium on Metallurgy and Technology of Refractory Metal Alloys, TMS-AIME, Plenum Press, New York, NY, 1968, p. 325.10.1007/978-1-4684-9120-3_9 ↗
21. K.J. Leonard, J.T. Busby, and S.J. Zinkle: J. Nucl. Mater., 2007, vol. 366, pp. 336–52.10.1016/j.jnucmat.2007.03.025 ↗
22. ASTM Designation B 193-87, ASTM Standards Online, ASTM, West Conshohocken, PA, 1992.
23. A. Buch: Pure Metal Properties: A Scientific Technical Handbook, ASM International and Freund Publishing House, Ltd., Materials Park, OH, 1999.
24. ASTM Standard E8-04, ASTM Standards Online, ASTM, West Conshohocken, PA, 2001.
25. Aerospace Structural Metals Handbook, 37th ed., W.F. Grown and S.J. Setlak, eds., CIMDAS/USAF CRDA Handbooks Operation, Purdue University, West Lafayette, IN, vol. 6.
26. R.L. Stephenson: J. Less Common Met., 1968, vol. 15, pp. 403–14.10.1016/0022-5088(68)90106-9 ↗
27. Binary Alloy Phase Diagrams, vol. 2, T.B. Massalski, ed., ASM INTERNATIONAL, Materials Park, OH, 1986.
28. D.B. Williams and C.B. Carter: Transmission Electron Microscopy, Plenum Press, New York, NY, 1996.10.1007/978-1-4757-2519-3 ↗
29. F.-G. Wei, T. Hara, and K. Tsuzaki: Philos. Mag., 2004, vol. 84 (17), pp. 1735–51.10.1080/14786430310001638762 ↗
30. (a) D.T. Hoelzer, A.F. Rowcliffe, and M. Li: Fusion Materials Semi-Annual Report, DOE/ER-0313/38, 2005, pp. 2-11.
31. (b) D.T. Hoelzer and S.J. Zinkle: Fusion Materials Semi-Annual Report, DOE/ER-0313/29, 2000, pp. 19-25.
32. K. Schroeder: CRC Handbook of Electrical Resistivities of Binary Metallic Alloys, CRC Press, Boca Raton, FL, 1983.
33. (a) M. Li, D.T. Hoelzer, and S.J. Zinkle: Fusion Materials Semi-Annual Report, DOE/ER-0313/34, 2003, pp. 2-5.
34. (b) S.J. Zinkle, A.N. Gubbi, and W.S. Eatherly: Fusion Materials Semi-Annual Report, DOE/ER-0313/21, 1996, pp. 15-19.
35. G.G. Lessmann: Determination of the Weldability and Elevated Temperature Stability of Refractory Metal Alloys, WANL-PR(p)-013 Report, Westinghouse Astronuclear Laboratory, Pittsburgh, PA, 1969.
36. J.B. Lambert and J.J. Rausch: Metals Handbook, 10th ed., ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 2.
37. J.R. Stephens: Metallography, 1977, vol. 10, pp. 1–25.10.1016/0026-0800(77)90040-4 ↗