journal article·2015-07Open access

The Relationship Between Microstructural Evolution and Mechanical Properties of Heavy Plate of Low-Mn Steel During Ultra Fast Cooling

Bin Wang, Zhao-dong Wang, Bing-xing Wang, Guo-dong Wang, R. D. K. Misra

Abstract

Abstract We describe here the electron microscopy and mechanical property studies that were conducted in an industrially processed 20- and 40-mm C-Mn thick plates that involved a new approach of ultrafast cooling (UFC) together with significant reduction in Mn-content of the steel by ~0.3 to 0.5 pct, in relation to the conventional C-Mn steels, with the aim of cost-effectiveness. The study demonstrated that nanoscale cementite precipitation occurred during austenite transformation in the matrix of heavy plate during UFC, providing significant precipitation strengthening. With decrease in UFC stop temperature and consequent increase in the degree of undercooling, there was a transition in the morphology of cementite from lamellar to irregular-shaped nanoscale particles in the 20 mm heavy plate. With the increase in plate thickness, nanoscale cementite precipitated in bainitic lath at the surface of 40 mm heavy plate, which significantly increased the strength and decreased the elongation. Simultaneously, microstructural evolution in hot-rolled sheets was studied via simulation experiments using laboratory rolling mill to define the limits of microstructural evolution that can obtained in the UFC process and develop an understanding of the evolved microstructure in terms of process parameters.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. A. Lucas, P. Simon, and G. Bourdon: Steel Res. Int., 2004, vol.75, pp.139–146.10.1002/srin.200405939 ↗
2. P. Simon, J.P. Fishbach, and P. Riche: Revue De Metallurgie, 1996, vol.93, pp.409-415.10.1051/metal/199693030409 ↗
3. H. J. Li, Z.L. Li, G. Yuan, Z. D. Wang, and G. D. Wang: J. Iron Steel Res. Int., 2013, vol.20, pp.29-34.10.1016/S1006-706X(13)60122-3 ↗
4. G. D. Wang: Shanghai Met., 2008, vol.30, pp.1–4.
5. G. D. Wang, X. H. Liu, L. G. Sun, Z. Liu, and D. Q. Liu: Iron Steel, 2008, vol.43, pp.49–52.
6. K. Nishioka, and K. Ichikawa: Sci. Technol. Adv. Mater., 2012, vol.13, pp.1-20.
7. K. F. A. Hajeri, C. I. Garcia, M. Hua, and A. J. DeArdo: ISIJ Int., 2006, vol.46, pp.1233–1240.10.2355/isijinternational.46.1233 ↗
8. C. Capdevila, C. Garcia-Mateo, J. Chao, and F. G. Caballero: Mater. Sci. Technol., 2009, vol.25 pp.1383–1386.10.1179/174328408X388158 ↗
9. G. Buzzichelli, and E. Anelli: ISIJ Int., 2002, vol.42, pp.1354–1363.10.2355/isijinternational.42.1354 ↗
10. X. H. Liu, L. G. Peng, and G. D Wang: Iron Steel, 2004, vol.39, pp.71–74.
11. [11] Y. V. Leeuwe, M. Onink, J. Sietsm, S. and van der Zwagg: ISIJ Int., 2001, vol.41, pp.1037–1046.10.2355/isijinternational.41.1037 ↗
12. [12] E. Y. Liu, L. G. Peng, G. Yuan, Z. D. Wang, D. H. Zhang, and G. D. Wang: J. Cent. South Univ. T., 2012, vol.19, pp.1341-1345.10.1007/s11771-012-1147-6 ↗
13. B. Wang, Y. Tian, G. Yuan, Z. Wang, G. Wang, and J. Chen: Manuf. Process Tech., 2011, vol. 189-193, pp. 2515-2521.
14. H, Kagechika (2006). ISIJ Int. 46:939–58.10.2355/isijinternational.46.939 ↗
15. B.X. Wang, Q. Xie Qian, Z. D. Wang, and G. D. Wang: J. Cent. South Univ., 2013, vol. 20, pp. 2960-2966.10.1007/s11771-013-1819-x ↗
16. [16] B.X. Wang, X.L. Chen, Y. Tian, Z. D. Wang, J. Wang, and D. H. Zhang: J. Iron Steel Res. Int., 2011, vol.28, pp.38-41.10.1016/S1006-706X(11)60062-9 ↗
17. [17] P. Bhattacharya, A.N. Samanta, and S. Chakraborty: Int. J. Therm. Sci., 2009, vol.48, pp.1741-1747.10.1016/j.ijthermalsci.2009.01.015 ↗
18. [18] G.N. Praveen, and J.N. Reddy: Int. J. Solids Struct., 1998, vol.35, pp.4457-4476.10.1016/S0020-7683(97)00253-9 ↗
19. [19] X. I. Chen, G. D. Wang, Y. Tian, B. X. Wang, G. Yuan, and Z. D. Wang: J. Iron Steel Res. Int., 2014, vol.21, pp.481-487.10.1016/S1006-706X(14)60075-3 ↗
20. B. Wang, Z.Y. Liu, X.G. Zhou, and G.D. Wang: Acta Metall. Sin., 2013, vol.49, pp.26-34.10.3724/SP.J.1037.2012.00372 ↗
21. H. Yin, T. Emi, and H. Shibata: ISIJ Int., 1998, vol.38, pp.794–801.10.2355/isijinternational.38.794 ↗
22. B. Wang, Z.Y. Liu, X.G. Zhou, G.D. Wang, and R.D.K. Misra: Mater. Sci. Eng. A, 2013, vol.575, pp.189-198.10.1016/j.msea.2013.02.071 ↗
23. R. L. Klueh, N. Hashimoto, and P. J. Maziasz: Scr. Mater. 2005, vol.53, pp.275–280.10.1016/j.scriptamat.2005.04.019 ↗
24. S. N. Prasad, and D.S. Sarma: Mater. Sci. Eng. A, 2005, vol.399, pp.161-172.10.1016/j.msea.2005.01.049 ↗
25. D. Rojas, J. Garcia, O. Prat, L. Agudo, C. Carrasco, G. Sauthoff, and A. R. Kaysser-Pyzalla: Mater. Trans. A, 2011, vol.528A, pp.1372–1381.
26. S. Choi, Y. Lee, P.D. Hodgson, and J.S. Woo: J. Mater. Process. Tech. 2002, vol.125, pp.63-71.10.1016/S0924-0136(02)00286-8 ↗
27. R.S. Nalawade, A.J. Puranik, G. Balachandran, K.N. Mahadik, and V. Balasubramanian: Int. J. Mech. Sci., 2013, vol.77, pp.8-16.10.1016/j.ijmecsci.2013.09.017 ↗
28. J.L. Zhang, and Z.S. Cui: J. Iron Steel Res. Int. 2011, vol.18, pp.20-27.10.1016/S1006-706X(11)60085-X ↗
29. S. N. Prasad, and D.S. Sarma: Mater. Sci. Eng. A, 2005, vol.408, pp.53-63.10.1016/j.msea.2005.06.018 ↗
30. H. Jafari, M.H. Idris, A. Ourdjini, and G. Payganeh: Acta Metall. Sin.(English Letters), 2009, vol.22, pp.401-407.10.1016/S1006-7191(08)60115-5 ↗