journal article·2015-12

Two-Step SPD Processing of a Trimodal Al-Based Nano-Composite

Yuzheng Zhang, Shima Sabbaghianrad, Hanry Yang, Troy D. Topping, Terence G. Langdon, Enrique J. Lavernia, Julie M. Schoenung, Steven R. Nutt

Publisher page

Abstract

An ultrafine-grained (UFG) aluminum nano-composite was fabricated using two severe plastic deformation steps: cryomilling of powders (and subsequent consolidation of blended powders by forging) followed by high-pressure torsion (HPT). The forged bulk composite featured a trimodal structure comprised of UFG, coarse grain (CG) regions, and ceramic particles. The additional HPT processing introduced finer grain sizes and altered the morphology and spatial distribution of the ductile CG regions. As a result, both strength and ductility increased substantially compared to those of the Al nano-composite prior to HPT. The increases were attributed to the more optimal shape and spacing of the CG regions which promoted uniform elongation and yielding during tensile loading. Microstructural changes were characterized at each processing step to establish the evolution of microstructure and to elucidate structure-property relationships. The toughening effect of the CG regions was documented via fracture analysis, providing a potential strategy for designing microstructures with enhanced strength and toughness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. R. Z. Valiev, R. K. Islamgaliev, and I. V. Alexandrov, Prog. Mater. Sci., vol. 45, no. 2, pp. 103–189, Mar. 2000.10.1016/S0079-6425(99)00007-9 ↗
2. R. Kapoor and J. K. Chakravartty, Acta Mater., vol. 55, pp. 5408–5418, 2007.10.1016/j.actamat.2007.05.049 ↗
3. T. G. Langdon, Acta Mater., vol. 61, no. 19, pp. 7035–7059, 2013.10.1016/j.actamat.2013.08.018 ↗
4. T. G. Langdon, Mech. Mater., vol. 67, pp. 2–8, 2013.10.1016/j.mechmat.2013.06.005 ↗
5. Y. Huang and T. G. Langdon, Mater. Today, vol. 16, no. 3, pp. 85–93, 2013.10.1016/j.mattod.2013.03.004 ↗
6. L. S. Toth and C. Gu, Mater. Charact., vol. 92, pp. 1–14, 2014.10.1016/j.matchar.2014.02.003 ↗
7. R. Z. Valiev, Y. Estrin, Z. Horita, T. G. Langdon, M. J. Zehetbauer, Y. T. Zhu, JOM, vol. 58, no. 4, pp. 33-39, 2006.10.1007/s11837-006-0213-7 ↗
8. E.O. Hall, Proc. Phys. Soc., vol. B64, pp. 747-753, 1951.10.1088/0370-1301/64/9/303 ↗
9. N.J. Petch, J. Iron Steel Inst., vol. 174, pp. 25-28, 1953.
10. Y.T. Zhu and T.G. Langdon, JOM, vol. 56 (10), pp. 58-63, 2004.10.1007/s11837-004-0294-0 ↗
11. Y.T. Zhu, T.C. Lowe, T.G. Langdon, Scripta Mater., vol. 51, pp. 825-830, 2004.10.1016/j.scriptamat.2004.05.006 ↗
12. R.Z. Valiev, A.P. Zhilyaev, and T.G. Langdon: Bulk Nanostructured Materials: Fundamentals and Applications. Wiley, Hoboken, 2014.10.1002/9781118742679 ↗
13. A. P. Newbery, S. R. Nutt, and E. J. Lavernia, JOM, vol. 58 (4), pp. 56–61, 2006.10.1007/s11837-006-0216-4 ↗
14. A. P. Newbery, B. Ahn, T. D. Topping, P. S. Pao, S. R. Nutt, and E. J. Lavernia, J. Mater. Process. Technol., vol. 203 (1-3), pp. 37–45, Jul. 2008.10.1016/j.jmatprotec.2007.09.078 ↗
15. D. Witkin, B.Q. Han, and E.J. Lavernia, Metall. Mater. Trans. A, vol. 37A, pp. 185–194, 2006.10.1007/s11661-006-0163-2 ↗
16. D. B. Witkin and E. J. Lavernia, Prog. Mater. Sci., vol. 51, no. 1, pp. 1–60, Jan. 2006.10.1016/j.pmatsci.2005.04.004 ↗
17. R. W. Hayes, P. B. Berbon, and R. S. Mishra, Metall. Mater. Trans. A, vol. 35A (12), pp. 3855–3861, 2004.10.1007/s11661-004-0291-5 ↗
18. O. Susegg, Micron and Microscopica Acta, vol. 23(1/2), pp. 223-224, 1992.10.1016/0739-6260(92)90149-8 ↗
19. Y. Li, W. Liu, V. Ortalan, W. F. Li, Z. Zhang, R. Vogt, N. D. Browning, E. J. Lavernia, and J. M. Schoenung, Acta Mater., vol. 58 (5), pp. 1732–1740, 2010.10.1016/j.actamat.2009.11.015 ↗
20. G. J. Fan, H. Choo, P. K. Liaw, and E. J. Lavernia, Acta Mater., vol. 54, no. 7, pp. 1759–1766, Apr. 2006.10.1016/j.actamat.2005.11.044 ↗
21. Z. Lee, V. Radmilovic, B. Ahn, E. J. Lavernia, and S. R. Nutt, Metall. Mater. Trans. A, vol. 41, no. 4, pp. 795–801, Oct. 2009.
22. Z. Lee, D. B. Witkin, V. Radmilovic, E. J. Lavernia, and S. R. Nutt, Mater. Sci. Eng. A, vol. 410–411, pp. 462–467, Nov. 2005.10.1016/j.msea.2005.08.104 ↗
23. Y. Zhang, T. D. Topping, E. J. Lavernia, and S. R. Nutt, Metall. Mater. Trans. A, vol. 45, no. 1, pp. 47–54, May 2013.
24. L. Jiang, K. Ma, H. Yang, M. Li, E. J. Lavernia, and J. M. Schoenung, JOM, vol. 66, no. 6, pp. 898–908, Apr. 2014.10.1007/s11837-014-0906-2 ↗
25. Z. Zhang, T. D. Topping, Y. Li, R. Vogt, Y. Zhou, C. Haines, J. Paras, D. Kapoor, J. M. Schoenung, and E. J. Lavernia, Scr. Mater., vol. 65, no. 8, pp. 652–655, Oct. 2011.10.1016/j.scriptamat.2011.06.037 ↗
26. J. Ye, B. Q. Han, Z. Lee, B. Ahn, S. R. Nutt, and J. M. Schoenung, Scr. Mater., vol. 53, no. 5, pp. 481–486, Sep. 2005.10.1016/j.scriptamat.2005.05.004 ↗
27. Y. Zhang, T. D. Topping, H. Yang, E. J. Lavernia, J. M. Schoenung, and S. R. Nutt, Metall. Mater. Trans. A, vol. 46, pp. 1196–1204, 2015.10.1007/s11661-014-2729-8 ↗
28. D. C. Hofmann, J.Y. Suh, A. Wiest, G. Duan, M.L. Lind, M. D. Demetriou, and W. L. Johnson, Nature, vol. 451, no. 7182, pp. 1085–9, Feb. 2008.10.1038/nature06598 ↗
29. A.P. Zhilyaev, T.G. Langdon, Prog. Mater. Sci., vol. 53, pp. 893-979, 2008.10.1016/j.pmatsci.2008.03.002 ↗
30. R. Z. Valiev, Y. V. Ivanisenko, E. F. Rauch, B. Baudelet, Acta Mater., vol. 44, pp. 4705-4712, 1996.10.1016/S1359-6454(96)00156-5 ↗
31. F. Wetscher, A. Vorhauer, R. Stock, R. Pippan, Mater. Sci. Eng. A, vol. 387-389, pp. 809-816, 2004.10.1016/j.msea.2004.01.096 ↗
32. Y. Li, Z. Zhang, R. Vogt, J. M. Schoenung, and E. J. Lavernia, Acta Mater., vol. 59, no. 19, pp. 7206–7218, Nov. 2011.10.1016/j.actamat.2011.08.005 ↗
33. L. Hashemi-Sadraei, S. E. Mousavi, R. Vogt, Y. Li, Z. Zhang, E. J. Lavernia, and J. M. Schoenung, Metall. Mater. Trans. A, vol. 43 (2), pp. 747–756, 2012.10.1007/s11661-011-0882-x ↗
34. Y. Zhu, D. A. Cullen, S. Kar, M. L. Free, and L. F. Allard, Metall. Mater. Trans. A, vol. 43, no. 13, pp. 4933–4939, Aug. 2012.10.1007/s11661-012-1354-7 ↗
35. S. Jain, M. L. C. Lim, J. L. Hudson, and J. R. Scully, Corros. Sci., vol. 59, no. 2012, pp. 136–147, Jun. 2012.10.1016/j.corsci.2012.02.018 ↗
36. I. N. A. Oguocha, O. J. Adigun, and S. Yannacopoulos, J. Mater. Sci., vol. 43, no. 12, pp. 4208–4214, Apr. 2008.10.1007/s10853-008-2606-1 ↗
37. R. Z. Valiev and I. V. Alexandrov, Y. T. Zhu, T. C. Lowe, J. Mater. Res., vol. 17, no. 1, pp. 5–8, 2002.10.1557/JMR.2002.0002 ↗
38. T. Mungole, P. Kumar, M. Kawasaki, and T. G. Langdon, J. Mater. Res., vol. 29, no. 21, pp. 2534–2546, Oct. 2014.10.1557/jmr.2014.272 ↗
39. T. Mungole, P. Kumar, M. Kawasaki, and T.G. Langdon, J. Mater. Sci., vol. 50, pp. 3549-3561, 2015.10.1007/s10853-015-8915-2 ↗