Minor Elements and Solidification Cracking During Laser Powder-Bed Fusion of a High $$\gamma \prime $$ CoNi-Base Superalloy
Source abstract
Abstract
The cracking behavior of a high (gamma prime ) volume fraction CoNi-base superalloy fabricated via laser powder bed fusion (LPBF) is studied in relation to the content of carbon and boron. Severe cracking occurred with the increase in boron content from 0.08 to 0.16 at. pct (0.015 to 0.029 wt pct), while compositions with 0.1 to 0.36 at. pct C (0.02 to 0.076 wt pct) and 0.08 at. pct B exhibited minimal cracking. Assessment of cracks in the high-boron composition shows a variation in crack density with printing parameters, and alignment of the cracks with the build direction. Scanning electron microscopy (SEM) of the crack surfaces shows evidence of a solidification cracking mode. Differential thermal analysis (DTA) reveals a decreased incipient melting temperature for the high-boron composition, and atom probe tomography (APT) is used to measure the enrichment at grain boundaries, revealing distinct boron segregation. Scheil-Gulliver solidification simulations for the different C and B levels are consistent with the incipient melting behavior observed with DTA. Evaluation of the solidification cracking susceptibility from the simulations allow for comparison of the CoNi alloy behavior to Ni-base superalloys studied for LPBF fabrication and displays how such metrics may aid in the design of new precipitation-strengthened superalloys for additive manufacturing (AM).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Advanced Materials Characterization Techniques · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
2. Y.T. Tang, C. Panwisawas, J.N. Ghoussoub, Y. Gong, J.W. Clark, A.A. Németh, D.G. McCartney, and R.C. Reedl: Acta Mater., 2021, vol. 202, pp. 417–3610.1016/j.actamat.2020.09.023 ↗
3. S. Sanchez, P. Smith, Z. Xu, G. Gaspard, C.J. Hyde, W.W. Wits, I.A. Ashcroft, H. Chen, and A.T. Clare: Int. J. Mach. Tools Manuf., 2021, vol. 165, p. 103729.10.1016/j.ijmachtools.2021.103729 ↗
4. L.N. Carter, M.M. Attallah and R.C. Reed: Laser powder bed fabrication of nickel-base superalloys: Influence of parameters; characterisation, quantification and mitigation of cracking, 2012, pp. 577–86.10.1002/9781118516430.ch64 ↗
5. I. Lopez-Galilea, B. Ruttert, J. He, T. Hammerschmidt, R. Drautz, B. Gault, and W. Theisen: Addit. Manuf., 2019, vol. 30, p. 100874.10.1016/j.addma.2019.100874 ↗
6. D. Grange, J.D. Bartout, B. Macquaire, and C. Colin: Materialia, vol. 12, p. 100686.10.1016/j.mtla.2020.100686 ↗
7. E. Chauvet, P. Kontis, E.A. Jägle, B. Gault, D. Raabe, C. Tassin, J.J. Blandin, R. Dendievel, B. Vayre, S. Abed, and G. Martin: Acta Mater., 2018, vol. 142, pp. 82–94.10.1016/j.actamat.2017.09.047 ↗
8. L.N. Carter, C. Martin, P.J. Withers, and M.M. Attallah: J. Alloys Compds., 2014, vol. 615, pp. 338–47.10.1016/j.jallcom.2014.06.172 ↗
9. V. Divya, R. Muñoz-Moreno, O. Messé, J. Barnard, S. Baker, T. Illston, and H. Stone: Characterization, 2016, vol. 114, pp. 62–74.10.1016/j.matchar.2016.02.004 ↗
10. S. Catchpole-Smith, N. Aboulkhair, L. Parry, C. Tuck, I. Ashcroft, and A. Clare: Addit. Manuf., 2017, vol. 15, pp. 113–22.10.1016/j.addma.2017.02.002 ↗
11. S. Griffiths, H. Ghasemi Tabasi, T. Ivas, X. Maeder, A. De Luca, K. Zweiacker, R. Wróbel, J. Jhabvala, R. Logé, and C. Leinenbach, Addit. Manuf., 2021, vol. 36, p. 101443.10.1016/j.addma.2020.101443 ↗
12. A. De Luca, C. Kenel, S. Griffiths, S.S. Joglekar, C. Leinenbach, and D.C. Dunand, Mater. Des., 2021, vol. 201, p. 109531.10.1016/j.matdes.2021.109531 ↗
13. G. Marchese, S. Parizia, A. Saboori, D. Manfredi, M. Lombardi, P. Fino, D. Ugues, and S. Biamino, Metals, 2020, vol. 10, p. 882.10.3390/met10070882 ↗
14. J.N. Ghoussoub, Y.T. Tang, W.J.B. Dick-Cleland, A.A.N. Nemeth, Y. Gong, D.G. McCartney, A.C.F. Cocks, and R.C. Reed, Metall. Mater. Trans. A, 2022, vol. 53A, 962–83.10.1007/s11661-021-06568-z ↗
15. C. Qiu, H. Chen, Q. Liu, S. Yue, and H. Wang, Mater. Charact., 2019, vol. 148, pp. 330–44.10.1016/j.matchar.2018.12.032 ↗
16. W. Zhou, Y. Tian, Q. Tan, S. Qiao, H. Luo, G. Zhu, D. Shu, and B. Sun, Addit. Manuf., 2022, vol. 58, p. 103016.10.1016/j.addma.2022.103016 ↗
17. W. Zhou, G. Zhu, R. Wang, C. Yang, Y. Tian, L. Zhang, A. Dong, D. Wang, D. Shu, and B. Sun, Mater. Sci. Eng. A, 2020, vol. 791, p. 139745.10.1016/j.msea.2020.139745 ↗
18. P. Kontis, E. Chauvet, Z. Peng, J. He, A.K. da Silva, D. Raabe, C. Tassin, J.J. Blandin, S. Abed, R. Dendievel, B. Gault, and G. Martin, Acta Mater., 2019, vol. 177, pp. 209–21.10.1016/j.actamat.2019.07.041 ↗
19. S.S. Babu, N. Raghavan, J. Raplee, S.J. Foster, C. Frederick, M. Haines, R. Dinwiddie, M.K. Kirka, A. Plotkowski, Y. Lee, and R.R. Dehoff, 2018, Metall. Mater. Trans. A, 49A, pp. 3764–80.10.1007/s11661-018-4702-4 ↗
20. B. Yoo, C. Jung, K. Ryou, W.S. Choi, L. Haußmann, S. Yang, T. Boll, S. Neumeier, and P.-P. Choi, Addit. Manuf., 2022, vol. 60, p. 103287.10.1016/j.addma.2022.103287 ↗
21. T. Froeliger, A. Després, L. Toualbi, D. Locq, M. Veron, G. Martin, R. Dendievel, Mater. Charact., 2022, vol. 194, p. 112376.10.1016/j.matchar.2022.112376 ↗
22. H. Ghasemi-Tabasi, C. de Formanoir, S.V. Petegem, J. Jhabvala, S. Hocine, E. Boillat, N. Sohrabi, F. Marone, D. Grolimund, H.V. Swygenhoven, and R.E. Logé, Addit. Manuf., 2022, vol. 51, p. 102619.10.1016/j.addma.2022.102619 ↗
23. J.H. Boswell, D. Clark, W. Li, and M.M. Attallah, Mater. Des., 2019, vol. 174, p. 107793.10.1016/j.matdes.2019.107793 ↗
24. M. Vilanova, M.C. Taboada, A. Martinez-Amesti, A. Niklas, M.S. Sebastian, and T. Guraya, Materials, vol. 14
25. A. Després, S. Antonov, C. Mayer, C. Tassin, M. Veron, J. J. Blandin, P. Kontis, and G. Martin: Materialia, 2021, vol. 19, 101193.10.1016/j.mtla.2021.101193 ↗
26. J. Grodzki, N. Hartmann, R. Rettig, E. Affeldt, and R.F. Singer: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 2914–26.10.1007/s11661-016-3416-8 ↗
27. J. Zhang and R.F. Singer: Acta Mater., 2002, vol. 50, pp. 1869–79.10.1016/S1359-6454(02)00042-3 ↗
28. S.P. Murray, K.M. Pusch, A.T. Polonsky, C.J. Torbet, G.G. Seward, N. Zhou, S.A. Forsik, P. Nandwana, M.M. Kirka, R.R. Dehoff, W.E. Slye, and T.M. Pollock: Nat. Commun., 2020, vol. 11, p. 4975.10.1038/s41467-020-18775-0 ↗
29. C. Stewart, S. Murray, A. Suzuki, T. Pollock, and C. Levi: Mater. Des., 2020, vol. 189, p. 108445.10.1016/j.matdes.2019.108445 ↗
30. S.P. Murray, E.B. Raeker, K.M. Pusch, C. Frey, C.J. Torbet, N. Zhou, S.A. Forsik, A.D. Dicus, G.A. Colombo, M.M. Kirka, and T.M. Pollock: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 2943–60.10.1007/s11661-022-06716-z ↗
31. W.C. Lenthe, S. Singh, and M. De Graef: Ultramicroscopy, 2019, vol. 207, p. 112841.10.1016/j.ultramic.2019.112841 ↗
32. M.A. Groeber, M.A. Jackson, Integr. Mater. Manuf. Innov., 2014, vol. 3, pp. 56–72.10.1186/2193-9772-3-5 ↗
33. University of Cambridge, Creep mechanisms, URL: https://www.edax.com/products/ebsd/oim-analysis/oim-analysis-v8. Accessed 1 July 2022.
34. K. Thompson, D. Lawrence, D.J. Larson, J.D. Olson, T.F. Kelly, and B. Gorman: Ultramicroscopy, 2007, vol. 107, pp. 131–39.10.1016/j.ultramic.2006.06.008 ↗
35. O.C. Hellman, J.A. Vandenbroucke, J. Rüsing, D. Isheim, and D.N. Seidman: Microsc. Microanal., 2000, vol. 6, pp. 437–4410.1007/S100050010051 ↗
36. J. Schindelin, I. Arganda-Carreras, E. Frise, V. Kaynig, M. Longair, T. Pietzsch, S. Preibisch, C. Rueden, S. Saalfeld, B. Schmid, J. Y. Tinevez, D.J. White, V. Hartenstein, K. Eliceiri, P. Tomancak, and A. Cardona: Nat. Methods, 2012, vol. 9, pp. 676–8210.1038/nmeth.2019 ↗
37. J.C. Yen, F.J. Chang, and S. Chang: IEEE Trans. Image Process., 1995, vol. 4, pp. 370–78 (1995)10.1109/83.366472 ↗
38. B.W. Krakauer and D.N. Seidman: Phys. Rev. B, 1993, vol. 48, pp. 6724–29.10.1103/PhysRevB.48.6724 ↗
39. S. Kou: Weld. J., 2015, vol. 94, pp. 374–88.
40. J.O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: Calphad, 2002, vol. 26, 273–312.10.1016/S0364-5916(02)00037-8 ↗
41. T.W. Clyne, M. Wolf, and W. Kurz: Metall. Mater. Trans. B, 1982, vol. 13B, pp. 259–66.10.1007/BF02664583 ↗
42. T.G. Gallmeyer, S. Moorthy, B.B. Kappes, M.J. Mills, B. Amin-Ahmadi, and A.P. Stebner, Addit. Manuf., 2020, vol. 31, p. 100977.10.1016/j.addma.2019.100977 ↗
43. S. Li, Q. Wei, Y. Shi, C.K. Chua, Z. Zhu, and D. Zhang, J. Mater. Sci. Technol., 2015, vol. 31, pp. 946–52.10.1016/j.jmst.2014.09.020 ↗
44. D. Tomus, P.A. Rometsch, M. Heilmaier, and X. Wu: Addit. Manuf., 2017, vol. 16, pp. 65–72.10.1016/j.addma.2017.05.006 ↗
45. Y.Q. Liu, X.S. Zhao, J. Yang, and J.Y. Shen: J. Alloys Compds., 2011, vol. 509, pp. 4805–10.10.1016/j.jallcom.2011.01.170 ↗
46. E. Lugscheider, H. Reimann: Monatshefte Chem., 1977, vol. 108, pp. 1005–10
47. X. Zhang, C.J. Yocom, B. Mao, and Y. Liao: J. Laser Appl., 2019, vol. 31, p. 031201.10.2351/1.5085206 ↗
48. H. Kyogoku, T.-T. Ikeshoji: Mech. Eng. Rev., 2020, vol. 7, pp. 19-00182–19-00182.10.1299/mer.19-00182 ↗
49. M. Rappaz, J.M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30, pp. 449–55.10.1007/s11661-999-0334-z ↗
50. N. Wang, S. Mokadem, M. Rappaz, and W. Kurz: Acta Mater., 2004, vol. 52, pp. 3173–82.10.1016/j.actamat.2004.03.047 ↗
51. P. Kontis, E. Alabort, D. Barba, D.M. Collins, A.J. Wilkinson, and R.C. Reed: Acta Mater., 2017, vol. 124, pp. 489–500.10.1016/j.actamat.2016.11.009 ↗