journal article·2023-05Open access

The Microstructural Evolution of CM247LC Manufactured Through Laser Powder Bed Fusion

J. F. S. Markanday, K. A. Christofidou, J. R. Miller, E. R. Livera, N. G. Jones, E. J. Pickering, W. Li, Y. Pardhi, C. N. Jones, H. J. Stone

Abstract

Abstract Numerous challenges persist with the additive manufacturing of high γ′ containing Ni-based superalloys such as CM247LC. Currently, significant cracking occurs during deposition of CM247LC components using laser powder bed fusion and during post-processing. Whilst post-deposition procedures seek to eliminate or minimise cracks, current procedures do not produce a microstructure suitable for service. This study systematically investigates the microstructural evolution of CM247LC manufactured using laser powder bed fusion following multiple post processing treatments. Phase and textural changes after each processing step were consistent with previous studies, although an additional Hf-rich and Cr-depleted segregation zone was identified along intercellular boundaries in the as-deposited condition, believed to be associated with the cracking propensity. Compositional modification of CM247LC including removal of Hf, reduction of C and addition of Nb eliminated the segregation zone but these changes were associated with an increased susceptibility to solidification and liquation cracking.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. S. Singamneni, Y. Lv, A. Hewitt, R. Chalk, W. Thomas, and D. Jordison: J. Aeronaut. Aerosp. Eng., 2019, vol. 8, pp. 351–71.10.35248/2168-9792.19.8.215 ↗
2. Y. Zhang, L. Wu, X. Guo, S. Kane, Y. Deng, Y.-G. Jung, J.-H. Lee, and J. Zhang: J. Mater. Eng. Perform., 2018, vol. 27, pp. 1–13.10.1007/s11665-017-2747-y ↗
3. S.S. Babu, N. Raghavan, J. Raplee, S.J. Foster, C. Frederick, M. Haines, R. Dinwiddie, M.K. Kirka, A. Plotkowski, Y. Lee, and R.R. Dehoff: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 3764–80.10.1007/s11661-018-4702-4 ↗
4. S.M. Thompson, L. Bian, N. Shamsaei, and A. Yadollahi: Addit. Manuf., 2015, vol. 8, pp. 36–62.
5. A. Basak: Paper Presented at 30th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2019, Austin, United States, 2019.
6. M.M. Attallah, R. Jennings, X. Wang, and L.N. Carter: MRS Bull., 2016, vol. 41, pp. 758–64.10.1557/mrs.2016.211 ↗
7. W.J. Sames, F. Medina, W.H. Peter, S.S. Babu, and R.R. Dehoff: Pittsburgh, PA, 2014, vol. 409–23.10.1002/9781119016854.ch32 ↗
8. M. Haines, A. Plotkowski, C.L. Frederick, E.J. Schwalbach, and S.S. Babu: Comput. Mater. Sci., 2018, vol. 155, pp. 340–49.10.1016/j.commatsci.2018.08.064 ↗
9. N. Nadammal, S. Cabeza, T. Mishurova, T. Thiede, A. Kromm, C. Seyfert, L. Farahbod, C. Haberland, J.A. Schneider, P.D. Portella, and G. Bruno: Mater. Des., 2017, vol. 134, pp. 139–50.10.1016/j.matdes.2017.08.049 ↗
10. A. Ramakrishnan and G.P. Dinda: Mater. Sci. Eng. A, 2019, vol. 740–741, pp. 1–13.10.1016/j.msea.2018.10.020 ↗
11. H. Wang, X. Zhang, G.B. Wang, J. Shen, G.Q. Zhang, Y.P. Li, and M. Yan: J. Alloy Compd., 2019, vol. 807, p. 151662.10.1016/j.jallcom.2019.151662 ↗
12. J.F.S. Markanday, M.A. Carpenter, N.G. Jones, R.P. Thompson, S.E. Rhodes, C.P. Heason, and H.J. Stone: Mater. Sci. Eng. A, 2021, vol. 825, p. 141781.10.1016/j.msea.2021.141781 ↗
13. J.F.S. Markanday, M.A. Carpenter, N.G. Jones, R.P. Thompson, S.E. Rhodes, C.P. Heason, and H.J. Stone: Data Brief, 2021, vol. 39, p. 107570.10.1016/j.dib.2021.107570 ↗
14. Y.T. Tang, C. Panwisawas, J.N. Ghoussoub, Y. Gong, J.W.G. Clark, A.A.N. Németh, D.G. McCartney, and R.C. Reed: Acta Mater., 2021, vol. 202, pp. 417–36.10.1016/j.actamat.2020.09.023 ↗
15. J.H. Boswell, D. Clark, W. Li, and M.M. Attallah: Mater. Des., 2019, vol. 174, p. 107793.10.1016/j.matdes.2019.107793 ↗
16. J.N. DuPont, J.C. Lippold, and S.D. Kiser: Welding Metallurgy and Weldability of Nickel-Base Alloys, vol. 14, Wiley, Hoboken, 2009, p. 440.10.1002/9780470500262 ↗
17. X. Zhang, H. Chen, L. Xu, J. Xu, X. Ren, and X. Chen: Mater. Des., 2019, vol. 183, p. 108105.10.1016/j.matdes.2019.108105 ↗
18. Y.S. Lee, M.M. Kirka, J. Ferguson, and V.C. Paquit: Addit. Manuf., 2020, vol. 32, p. 101031.
19. S. Griffiths, H. Ghasemi Tabasi, T. Ivas, X. Maeder, A. De Luca, K. Zweiacker, R. Wróbel, J. Jhabvala, R.E. Logé, and C. Leinenbach: Addit. Manuf., 2020, vol. 36, p. 101443.
20. J. Xu, X. Lin, Y. Zhao, P. Guo, X. Wen, Q. Li, H. Yang, H. Dong, L. Xue, and W. Huang: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 5118–36.10.1007/s11661-018-4826-6 ↗
21. N.J. Harrison, I. Todd, and K. Mumtaz: Acta Mater., 2015, vol. 94, pp. 59–68.10.1016/j.actamat.2015.04.035 ↗
22. S. Kou: Acta Mater., 2015, vol. 88, pp. 366–74.10.1016/j.actamat.2015.01.034 ↗
23. B. Ruttert, M. Ramsperger, L. Mujica Roncery, I. Lopez-Galilea, C. Körner, and W. Theisen: Mater. Des., 2016, vol. 110, pp. 720–27.10.1016/j.matdes.2016.08.041 ↗
24. T. Boellinghaus and H. Herold: Hot Cracking Phenomena in Welds, Springer, Berlin, 2005.10.1007/b139103 ↗
25. T. Boellinghaus, H. Herold, C.E. Cross, and J.C. Lippold: Hot Cracking Phenomena in Welds II, Springer, Berlin, 2008, p. 467.10.1007/978-3-540-78628-3 ↗
26. S. Griffiths, H. Ghasemi-Tabasi, A. De Luca, J. Pado, S.S. Joglekar, J. Jhabvala, R.E. Logé, and C. Leinenbach: Mater. Charact., 2021, vol. 171, p. 110815.10.1016/j.matchar.2020.110815 ↗
27. A. Migliori and J. Sarrao: Resonant Ultrasound Spectroscopy: Applications to Physics, Material Measurements and Nondestructive Evaluation, Wiley, New York, 1997.
28. R.E.A. McKnight, T. Moxon, A. Buckley, P.A. Taylor, T.W. Darling, and M.A. Carpenter: J. Phys., 2008, vol. 20, p. 075229.
29. A. Marmier, Z.A.D. Lethbridge, R.I. Walton, C.W. Smith, S.C. Parker, and K.S. Evans: Comput. Phys. Commun., 2010, vol. 181, pp. 2102–15.10.1016/j.cpc.2010.08.033 ↗
30. P. Ravindran, L. Fast, P.A. Korzhavyi, B. Johansson, J. Wills, and O. Eriksson: J. Appl. Phys., 1998, vol. 84, pp. 4891–4904.10.1063/1.368733 ↗
31. C. Qiu, H. Chen, Q. Liu, S. Yue, and H. Wang: Mater. Charact., 2019, vol. 148, pp. 330–44.10.1016/j.matchar.2018.12.032 ↗
32. J.C. Lippold, T. Boellnghaus, and C.E. Cross: Hot Cracking Phenomena in Welds III, Springer, Berlin, 2011.
33. M. Zhong, H. Sun, W. Liu, X. Zhu, and J. He: Scripta Mater., 2005, vol. 53, pp. 159–64.10.1016/j.scriptamat.2005.03.047 ↗
34. R. Muñoz-Moreno, V.D. Divya, S.L. Driver, O.M.D.M. Messé, T. Illston, S. Baker, M.A. Carpenter, and H.J. Stone: Mater. Sci. Eng. A, 2016, vol. 674, pp. 529–39.10.1016/j.msea.2016.06.075 ↗
35. V.D. Divya, R. Muñoz-Moreno, O.M.D.M. Messé, J.S. Barnard, S. Baker, T. Illston, and H.J. Stone: Mater. Charact., 2016, vol. 114, pp. 62–74.10.1016/j.matchar.2016.02.004 ↗
36. W. Chen, M.C. Chaturvedi, and N.L. Richards: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 931–39.10.1007/s11661-001-0350-0 ↗
37. A. Després, S. Antonov, C. Mayer, C. Tassin, M. Veron, J.-J. Blandin, P. Kontis, and G. Martin: Materialia, 2021, vol. 19, p. 101193.10.1016/j.mtla.2021.101193 ↗
38. X. Wang, L.N. Carter, B. Pang, M.M. Attallah, and M.H. Loretto: Acta Mater., 2017, vol. 128, pp. 87–95.10.1016/j.actamat.2017.02.007 ↗
39. X. Wei, M. Xu, Q. Wang, M. Zhang, W. Liu, J. Xu, J. Chen, H. Lu, and C. Yu: Mater. Des., 2016, vol. 110, pp. 90–98.10.1016/j.matdes.2016.07.130 ↗
40. B. Sreenu, R. Sarkar, S.S.S. Kumar, S. Chatterjee, and G.A. Rao: Mater. Sci. Eng. A, 2020, vol. 797, p. 140254.10.1016/j.msea.2020.140254 ↗
41. Q. Tan, G. Zhu, W. Zhou, Y. Tian, L. Zhang, A. Dong, D. Shu, and B. Sun: J. Alloy Compd., 2022, vol. 913, p. 165196.10.1016/j.jallcom.2022.165196 ↗
42. D. Ma, A.D. Stoica, Z. Wang, and A.M. Beese: Mater. Sci. Eng. A, 2017, vol. 684, pp. 47–53.10.1016/j.msea.2016.12.028 ↗
43. Y.H. He, X.Q. Hou, C.H. Tao, and F.K. Han: Eng. Fail. Anal., 2011, vol. 18, pp. 944–49.10.1016/j.engfailanal.2010.11.012 ↗
44. L. Zhuo, M. Liu, Q. Chen, S. Liang, J. Xiong, and F. Wang: Mater. Sci. Technol., 2018, vol. 34, pp. 334–39.10.1080/02670836.2017.1389118 ↗
45. J.F.S. Markanday: Mater. Sci. Technol., 2022, pp. 1–15
46. R. Engeli, T. Etter, and F. Geiger: United States of America, 2017, 20170356068.
47. J. Zhang: Scripta Mater., 2003, vol. 48, pp. 677–81.10.1016/S1359-6462(02)00559-6 ↗
48. J.O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: Calphad, 2002, vol. 26, pp. 273–331.10.1016/S0364-5916(02)00037-8 ↗
49. J.C. Lippold: Welding Metallurgy and Weldability, vol. 17, Wiley, Hoboken, 2015, p. 400.10.1002/9781118960332 ↗
50. R.C. Reed: The Superalloys: Fundamentals and Applications, vol. 14, Cambridge University Press, Cambridge, 2006, p. 372.10.1017/CBO9780511541285 ↗
51. C. Li, Z.Y. Liu, X.Y. Fang, and Y.B. Guo: Procedia CIRP, 2018, vol. 71, pp. 348–53.10.1016/j.procir.2018.05.039 ↗
52. B.D. Conduit, T. Illston, S. Baker, D.V. Duggappa, S. Harding, H.J. Stone, and G.J. Conduit: Mater. Des., 2019, vol. 168, p. 107644.10.1016/j.matdes.2019.107644 ↗